Hyundai H Lcd2008 Instruction Manual

H-LCD2008
LCD TV           LCD L?E?

2 Table of contentsTable of contents......................................................................................................................................................... 2
Important safety precautions........................................................................................................................................ 3
General...

3 Important safety precautionsWarning
Please unplug the power cord from the AC outlet and contact our service personnel to repair underthe following conditions:xAny obvious abnormality appears in the product, such as smoky, peculiar smell or strange
sound.
xWhen a liquid has been spilled or other objects have fallen into the product.
xNo picture or sound.
xCover or panel is broken.
xAlthough you have operated the product by following the operating instructions, it still cannot
wo rk no rmally....

4 xPlease place the product on a flat surface in a well-ventilated location. Keep it away fro m the
burning-light, direct sunlight, vibration, high-temperature and humidity. Store the product with
a temperature from –200
C ~500
C; Otherwise you may destroy the product.
xDo not place any vase, potted plant, cup, medicine and any container with water on this prod-
uct. If the liquid is spilt, it may cause the fire, electric shock or breakdown.
xDo not install it at the place on the strong magnetic field...

5 General introductionxSize of the screen 20/51 cm
xAspect ratio 4:3
xScreen resolution: 800x600
xBrightness: 450 cd/m2
xContrast: 500:1
xWide viewing angle 160º/140º
xResponse time: 16 ms
xColor systems: PAL, SECAM, NTSC
xDigit al co mb filt er
xCo nvenient OSD menu in Russian and English languages
xConnections: RF antenna, S-Video, Composite, SCART, Component, headphones out, VGA
xWide range power supply: 110 – 240 V, 50/60Hz
AccessoriesNote:Please keep the wrapping box and the padding well...

6 Controls and connectionPlace your LCD TV on a flat surface in a well-ventilated location.
Front panel
Top panel button descriptionButton Description1MENU  Open the menu or switch among the menus.2TV/AV  To switch among the signal source.3VOL-/+  Decrease/increase the sound volume. Adjust functions in menu operation.4P-/+In TV mode, decrease/increase channel number. Select functions in menu operation.5IndicatorIndicates the TV state6POWER  Enter or leave the standby mode.7Sensor  Remote sensor for RC 

7 Rear panel terminals and controls
ItemsConnection description8  DC inputConnect the DC 12V power cable with DC adapter, which should be
connected to AC power supply. Connect the other end of the DC
power cable with the DC power port on the TV.9  Headphone jackCo nnect the headphones t o this jack10RF antennaThe RF output terminal can be connected with the RF input port of
the TV.11S-VideoThe output S-Video terminal of DVD can be connected with the S-
Video input port of the TV through S-Video...

8 Remote control (RC)1. POWER button
2. Digit buttons
3. Switch program button
4. SCAN button
5. V-/+ button
6. OK button
7. MENU button
8. P button
9. S button
10. TV/AV button
11. PREVIOUS CHANNEL button
12. P-/+ button
13. SURROUND button
14. Cursor buttons
15. MUTE button
16. CALL button
17. SLEEP button 

9 Insert the batteries
xRemove the battery cover by pressing the symbol and pulling the cover space in the direction of
the arrow.
xInsert the two 1.5V (AAA size) batteries making sure the polarity (+ or -) of the batteries
matches the polarity marks inside the unit.
xReplace the battery cover by sliding it in until you hear a click sound.
Note:If the RC doesn’t react to pressing the buttons or the working range was decreased insert the
new batteries.
Use of RC
Use the RC by pointing it towards the RC...

10 OperationsStandby
Press POWER button to turn on or off.
TV/AV
Press TV/AV button, signal source changes as following: TV => AV => SVHS => SCART =>
YpbPr => PC => TV. By long pressing this button you will select menu as followed you can select
which source you need quickly.
Digit buttons
Direct ly press the number buttons to switch to the relevant program, according to the current pro-
gram digits. The selecting range of the programs is 0~199.
Switch program button
xEach time after selecting a...