Hyundai H Lcd3210 Instruction Manual

LCD TV
Руководство по эксплуатации 
Instruction manual
H-LCD3210
ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ (LCD)
 

Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Installation and connection
InstallationStand installation
Wall mounting
Connection Outdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations  AV signal sources
 Teletext operations
 PC screen
OSD operation Picture setup
Audio setup
Miscellaneous setup
TV setup
PC setup
USB operation Audio file playback
Photo file playback...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

4
Before you start
the burning-light, direct sunlight, vibration, 
high-temperature and humidity. Store the 
product with a temperature from –20
0C ~500C; 
otherwise you may destroy the product.  • Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be...

5
Installation and connection
Installation
Stand installation
Fix the support to the stand by screws (3 
pieces A-type screws 4x14 mm) as shown in 
the picture:
Fix the finished stand assembly to the unit 
by screws (4 pieces B-type screws) as shown 
in the picture:
Wall mountingFix the support to the unit by screws (4 
pieces B-type screws) as shown in the picture:
Use 4 screws to fix the unit on the wall 
mount bracket. Please find there are 4 holes 
on the back of the unit:
 
Downloaded From...

6
Installation and connection
Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources (Including 
DVD, VCDR, CAMCORDER and PC) to the 
proper AUDIO input jacks ‘L’ and ‘R’. •  Connect the video source to the VIDEO 
jack by RCA cable. •  If the video source has a SCART output 
jack, you can connect the signal to the monitor 
by the SCART cable. •  Connect...

7
Operation
Control elements    
Front panel
1. Remote control sensor
2. Power button and indicator
Back panel1. INPUT button
2. CH+/UP button
3. CH-/DOWN button
4. VOL+/RIGHT button
5. VOL-/LEFT button
6. MENU button
7. USB jack
8. HDMI 1 input
9. HDMI 2 input
10. HDMI 3 input
11. PC VGA input
12. SCART connector
13. S-Video input
14. Composite video input
15. Y /Pb/Pr component input
16. Stereo audio input (L+R)
17. PC audio input
18. Earphone output
19. RF antenna input
20. AC power input
1
2
3
4
5
6...

89
OperationOperation
Remote controller (RC)
1.  POWER button
2.  Number buttons
3.  Zzz button
4.  ASPECT button
5.  VOL+/VOL- buttons
6.  DISPLAY button
7.  ENTER button/cursor buttons (
///)
8.  MENU button
9.  P.MODE button
10. INPUT button
11. 
/HOLD button 
12. /TEXT button
13. /INDEX button 14.  
/SIZE button
15.  FAV button
16.  FAV- button
17.  Red button
18.  Green button
19.  AUTO button
20.  MUTE button
21.  
 button
22.  NICAM button
23.  CH+/CH- buttons
24.  EXIT button
25.  S.MODE button...

89
OperationOperation
General operations
•  Press POWER button on the unit or on 
the RC to switch on the power, the indication 
light will be in blue color. Press POWER button 
again to switch off the power, and the light will 
be in red color. •  The picture setup, sound setup, previous 
channel can be memorized before you switch 
off the unit. The unit will restart under the 
previous state when you switch on it again. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button...

10
Operation
OSD operation
Press MENU button on the RC to enter 
the OSD menu. Use / buttons to 
select a setting page displayed on the screen. 
Press 
 button to go the page. Press / buttons to select the needed item, then 
use 
/ buttons to select available setting 
or to adjust the selected item. Press ENTER 
button to confirm. After setting press EXIT button to exit the 
menu.
Picture setup
Picture Mode
Contrast
Brightness
Saturation
Hue
Sharpness
Color Temperature
Advance Picture Adjust
Audio Video...