Hyundai H Lcdvd3200 Instruction Manual

							ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
С ЖИДКОКРИСТАЛЛИЧЕСКИМ  ЭКРАНОМ И ВСТРОЕННЫМDVD-ПРОИГРЫВАТЕЛЕМ
LCD TV WITH BUILT-IN DVD 
PLAYER
Руководство по эксплуатации 
Instruction manual
H-LCDVD3200
 
						

							Slow motion
Pause
Repeat
Display
Goto
Preview
Audio
Languages
Subtitle
Angle
Mute
Zoom
Repeat A-B
Step
Volume
MP3/JPEG playback
DVD setting System setup
Language setup
Audio setup
Digital setup
General information
Troubleshooting Causes of interference
Accessories
Specifications
Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Connection/Installation
Stand installation
Wall mounting
Connection
Outdoor antenna connection
Other connections
Operation
Control elements  Front and lateral panel
 Back panel
Remote controller Changing the battery
General operations  AV signal sources
 Teletext operations
 PC screen
OSD operation Picture setting
Sound setting
TV tuning setup
 Time setting Function setting
DVD player operation Basic play
Turn ON/OFF
Insert disc
Play the disc
Menu playback
Title playback
Program playback
DVD operating instruction
Play
Previous/Next
Forward/Backward
2 3
Table of contentsBefore you start
Dear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read 
this manual carefully before connecting, operating and/or adjusting the product and keep 
the manual for reference in the future.
2
3
3
3
5
5
5
6
6
6
7
7
7
7
8
8
9
9
9
10
10
10
10
10
11
12
13
13
13
13
13
13
13
13
14
14
14
1414
14
14
15
15
15
15
16
16
16
16
16
16
16
16
16
17
17
18
18
18
19
19
19
20
21
Downloaded From TV-Manual.com Manual” 
						

							23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects on the environment and human 
health.
Utilization of the product
Important safeguards
•  Please unplug the power cord from the AC 
outlet and contact a service center for repair 
if following occurs: any obvious abnormality 
appears in the unit, such as smoky, peculiar 
smell or strange sound; liquid has been spilled or 
other objects have fallen into the unit; no picture 
or sound; cover or panel is broken; although you 
have operated the unit following the operating 
instructions, it still cannot work normally.
•  This unit should only be connected to a 
wall socket having grounding.
•  Always disconnect the power cord and 
antenna during a storm. •  Do not fix the power cord with a metal nail.
•  Unplug the power cord from the AC outlet; 
also unplug the signal cables from the input 
ports when the unit is unused for long periods 
of time. •  When unplugging the plug, always hold 
the wide slot, do not touch the metal part, and 
do not destroy, refit, twist, pull or roast the 
power cord. •  Please contact the service center 
immediately if you found that the core is 
showed in the air or has been broken. •  Please replace the AC outlet if the metal 
bolt cannot be inserted into the power socket 
completely or it cannot be fastened even when 
it was pushed in, otherwise, any accidents of 
shocks and fires would happen. •  Never touch the antenna lie or power plug 
if it stars to thunder. •  Do not touch the power plug with wet 
hands. •  Do not use any non-rated power socket 
with numerous devices jointed on one power 
socket or cable device. The wire of non-
designated capacity may cause the fire due to 
the generation of heat. •  All instructions must be read and 
understood well before you operate the unit. 
Heed all warnings and follow all instructions. •  Please use the accessories provided 
by the manufacturer. Using inadequate 
accessories may result in accidents. •  Please adjust the product through the 
panel buttons or the remote controller, do 
not remove the cover or attempt to service 
the product by yourself. Do not disassemble 
back cover and do not make maintenance by 
yourself to avoid the electric shock. •  Over-press the panel may destroy the 
product. •  Do not place the product on an unstable 
cart, stand surface, tripod, bracket, or table. 
The product may fall, causing serious accidents 
as well as the damage to the product.  •  Please place the product on a flat surface 
in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity. Store the 
product with a temperature from –20
0C ~500C; 
otherwise you may destroy the product. 
Downloaded From TV-Manual.com Manual” 
						

							4
Before you start
•  Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment.
•  Fasten the wheel of the product or shelf 
with wheels when installing this product. If it 
moves or is tipped over, it may be damaged. •  Do not place any fire source such as 
candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire. •  Do not place the unit into closed space 
of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at list 10cm at 
above, left, and right of the TV. •  Please place all the signal cords behind of 
rear panel. •  Do not overexert or touch the panel when 
you convey the product. Do not transfer the 
LCD TV up or down display direction. •  Do not transport it with the power cord 
or the connection cable connected. If you 
move this product with the power cord or the 
connection cable connected, the damaged 
power cord, connection cable or connection 
terminal may cause the fire, the electric shock 
or breakdown. •  2 persons or more shall transport the 
device, which is heavier than 18 kg. If you drop 
or tip over the device, it may damage it. •  The temperature of the product’s body 
becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.
All images provided herein are schematic 
drawings of real objects and may differ 
from their real images.
 
						

							5
Сonnection/Installation
Stand installationFix the support to the stand by screws (3 
pieces A-type screws) as shown in the picture:
Fix the finished stand assy to the unit by 
screws (4 pieces B-type screws) as shown in 
the picture:
Installation Wall mountingFix the support to the unit by screws (4 
pieces B-type screws) as shown in the picture:
Use 4 screws to fix the unit on the wall 
mount bracket. Please find there are 4 VESA 
holes on the back of the unit:
 
Downloaded From TV-Manual.com Manual” 
						

							6
Connection/Installation
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources (Including 
DVD, VCDR, CAMCORDER and PC) to the 
proper AUDIO input jacks ‘L’ and ‘R’. •  Connect the video source to the VIDEO 
jack by RCA cable. •  If the video source has a SCART output 
jack, you can connect the signal to the monitor 
by the SCART cable. •  Connect the video source to the S-VIDEO 
input jack of the monitor by the S-video cable 
(provided that the video source has S-video 
output jack). •  When using the LCD as a computer 
screen, connect the PC to the VGA jack from 
Connection
the monitor by the relevant cable. •  This unit has PC audio in jack. Connect 
this jack to PC main unit with related audio 
cable in PC mode and adjust the volume to 
what you want. •  If the video source has a HDMI output 
jack, you can connect the signal to the monitor 
by the HDMI cable.
75 Ohm co-axis cable
TVRF antenna jack
Antenna cable connector
Downloaded From TV-Manual.com Manual” 
						

							7
Operation
Control elements    
Front and lateral panel
 
       1. PLAY/PAUSE button
       2. STOP button
       3. OPEN/CLOSE button
       4. VOL-/LEFT cursor button
       5. VOL+/RIGHT cursor button
       6. CH-/DOWN cursor button
       7. CH+/UP cursor button
       8. MENU button
       9. TV/AV button
     10. IR sensor
     11. POWER button
Back panel
1. HDMI 1 input
2. HDMI 2 input
3. PC VGA input
4. PC audio input
5. S-Video input
6. Pb input
7. Pr input
8. Y input
9. CVBS input
10. YPbPr R audio input
11. CVBS R audio jack
12. YPbPr L audio input
13. CVBS L audio jack
14. SCART 1 input
15. SCART 2 in/out jack
16. Antenna RF input
17. AC power socket
18. Disc slot
1
2
3
5 4
6
7
8
9
10
11
1
2
3
4
6
8
10
12
14
15
16
17 5
7
9
11
13 18
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
Remote controller (RC)
1. POWER button
2. Number buttons
3. ASPECT button
4. VOL+/VOL- buttons
5. DISPLAY button
6. ENTER button/cursor buttons (
///)
7. LCD MENU button
8. P.MODE button
9. INPUT button
10. HOLD/STOP button
11. TEXT/PLAY/PAUSE button
12. 
/INDEX button
13. /SIZE button 14. 
 button
15.  button
16. D.MENU button
17. TITLE button
18. PROGRAM/red button
19. INTRO/green button
20. AUTO/OPEN/CLOSE buttons
21. MUTE button
22. 
 button
23. NICAM button
24. CH+/CH- button
25. DVD SETUP button
26. S.MODE button
27. SLEEP button
28. PGUP/SLOW button
29. PGDW/STEP button
30. SUBPAGE/ZOOM button
31. REVEAL/AUDIO button
32. D.SUB button     35. D.DISP button
33. ANGLE button     36. A-B/yellow button
34. GOTO button     37. REPEAT/cyan button
Changing the battery1.  Remove the battery compartment cover 
on the back of the RC. 2.  Insert the batteries into the battery 
compartment making sure that the correct 
polarity is observed. 3.  Install the cover back.
•  Use two AAA batteries for the RC. The RC 
should be pointed at remote sensor within 8 
meters and within 30 degrees at the left or the 
right side. •  Take the battery out of the RC if it is not 
used for a long time. Do not mix new and used 
batteries or different types of batteries. Weak 
batteries can leak and severely damage the RC. •  Do not expose the RC to shock, liquids, and 
do not place it in an area with high humidity.
1 2
3
1 20
21
22
23
24
25
26
27
28
29
30
31
32
2
3
4
5
6
7
8
9
10
11
12
13
19 37
14
16
18
36
15
17
35
33
34
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
General operations
•  Press POWER button on the unit or on 
the RC to switch on the power, the indication 
light will be in blue color. Press POWER button 
again to switch off the power, and the light will 
be in red color. •  The picture setup, sound setup, previous 
channel can be memorized before you switch 
off the unit. The unit will restart under the 
previous state when you switch on it again. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume from 0 to 100. •  Press SLEEP button repeatedly to set the 
sleep time (from 0 to 120 min). •  Press INPUT button on the RC to select 
the TV function mode. Channel ‘1’ will appear 
on the right top corner after channel searching 
is completed. Press CH-/CH+ buttons to select 
previous or next channels; or press number 
buttons to enter a channel number directly; 
or press -/-- button until the screen displays 
‘-’ or ‘--’, then use number buttons to enter a 
channel number from 1 to 99. •  Press 
 button on the RC to select 
from the present channel and the previously 
displayed channel. •  Press P.MODE button repeatedly to cycle 
through the available video picture modes from 
the following 6 types: Standard => Personal => 
Movie => Sport => Mild => Game. •  Press S.MODE button repeatedly to 
cycle through the available sound modes from 
the following 4 types: Music => Theatre => 
Personal => Voice. •  Press MUTE button to cut off sound, press 
this button again to resume sound. •  Press DISPLAY button to display the 
preset TV channel play information. •  Press ASPECT button repeatedly to select 
a screen display size from the available list: 
FullScreen => ZOOM1 => ZOOM2 => Auto => 
4:3 => 14:9 => 16:9 => Subtitle.
  Available aspects may differ for different 
signal sources.
AV signal sourcesPress INPUT button on the RC, then press / cursor buttons to cycle through 
the available source list as follows: TV - CVBS - 
S-VIDEO - SCART1 - SCART2 - VGA - HDMI1 - 
HDMI2 - DVD. Press 
 cursor button to confirm.
TELETEXT operations (option)•  Press INPUT button to select the TV 
mode. Then press CH-/CH+ buttons to select 
TV channel in order to pick up the picture 
signal of TELETEXT. •  Press PGUP/PGDW buttons to select the 
previous page or the next page; use number 
buttons and the {-/- -} button to enter into a page. •  Teletext button functions are as follows:
TEXT: Press TEXT button to enter into 
TEXT mode. Press this button again to return 
to the channel you are watching. PGDW: Press this button to view the next 
teletext page’s program. PGUP: Press this button to view the previous 
teletext page’s program. HOLD: Press this button to stop the move to 
the next page, and the hold symbol will appear 
in the top left hand corner of the screen. Press 
this button again to cancel operation. INDEX: Press this button to go to the index 
page. SIZE: Press this button to enlarge the text 
shown on the teletext screen, and one half of 
page could be shown.  Press this button again to view the second 
half of this page.  Press this button third time to normal size 
text page view. REVEAL: Press this button to reveal the 
cancelled information. Press this button again 
to cancel the information. SUBPAGE: Press this button to select sub 
page, and the sub-page symbol will appear in 
the left top hand corner of the screen. Enter the 
number of sub page and use numeric buttons 
in the format 0001 for sub page 1.The teletext 
will search for the sub page. Red/Green/Yellow/Blue buttons: Press 
these 4 color buttons to access directly to 
Downloaded From TV-Manual.com Manual” 
						

							10
Operation
corresponding color page displayed at the 
lower parts of teletext screen.
PC screenPress INPUT button to select the VGA input 
(TV into PC) mode. The unit has a VGA jack 
for a normal computer. Connect the monitor 
with a PC by this jack and the unit can be used 
as the monitor for the PC.
OSD operation
Press LCD MENU button on the RC to enter 
a setting menu paged displayed on the screen. 
Press 
/ buttons to go to the 
needed item, then use 
/ buttons to select 
available setting or to adjust the selected item. 
Press ENTER button to confirm After setting press LCD MENU button to 
return to the root menu or exit menu setting.
Picture setting
PICTURE
Picture Mode
Contrast
Brightness
Colour
Tint
Sharpness
Colour Temperature
DNR
Select  Adjust
•  Picture Mode: Standard/Personal/Movie/
Sport/Mild/Game. •  Contrast
•  Brightness
•  Colour. Note: This item is invalid in VGA 
PC mode, and it will be shown in gray. •  Tint: adjust the tone of color when your 
system is in NTSC. •  Sharpness
•  Colour Temperature. Note: This item is 
valid in VGA PC mode only. •  DNR: Digital Noise Reduction effect for 
reducing the video noise level: Off/Low/Mid/
High, if the broadcast signal received is weak.
Sound setting
SOUND
Volume
Sound Mode
Bass
Treble
Balance
Select  Adjust
•  Volume
•  Sound Mode: Personal/Voice/Music/
Theatre. •  Bass
•  Treble
•  Balance: adjust output between left and 
right speakers.
TV tuning setup (for analogue TV 
signal source only)
SETUP
Country
Auto Tuning
Manual Tuning
Program Edit
Select  Adjust
•  Country
•  Auto Tuning: enter into auto tuning menu. 
Then press ENTER button to start auto tuning. •  Manual Tuning: enter into manual tuning 
menu:
Manual Tuning
Program
Sound System
Colour System
Program Label
AFT
Manual Search
Select  Adjust
Downloaded From TV-Manual.com Manual”