Hyundai H Led15v7 Instruction Manual

							LED TV
Руководство по эксплуатации 
Instruction manual
H-LED15V7
ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ (LCD)
 
						

							Table of contents 
Before you start 
Utilization of the product 
Important safeguards
InstallationWall mounting
Stand installation
Connection
Connection Outdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations Signal sources
Teletext operations
PC screen
OSD operation Channel setting
Picture setting
Sound setting
Timer setting
Option setting
Screen setting
USB operation General operations of file playback
General information
Troubleshooting Causes of interference
Accessories
Specifications
2 3
Table of contentsBefore you start
Dear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read 
this manual carefully before connecting, operating and/or adjusting the product and keep 
the manual for reference in the future.
2
3
3
3
4
4
4
5
5
5
5
6
6
6
6
7
7
8
8
8
9
9
9
10
10
10
10
11
11
11
12
12
12
13
14
Downloaded From TV-Manual.com Manual” 
						

							23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects on the environment and human 
health.
Utilization of the product
Important safeguards
•  Before connecting the AC power cord 
to the DC adapter outlet, make sure that 
the voltage designation of the DC adapter 
corresponds to the local electrical supply.
•  Accessories include a DC adaptor RS-
330/120-S325. Do not use other adaptors with 
this unit. •  Please unplug the power cord from the AC 
outlet and contact a service center for repair 
if following occurs: any obvious abnormality 
appears in the unit, such as smoky, peculiar 
smell or strange sound; liquid has been spilled or 
other objects have fallen into the unit; no picture 
or sound; cover or panel is broken; although you 
have operated the unit following the operating 
instructions, it still cannot work normally. •  This unit should only be connected to a 
wall socket having grounding. •  Always disconnect the power cord and 
antenna during a storm. •  Do not fix the power cord with a metal nail.
•  Unplug the power cord from the AC outlet; 
also unplug the signal cables from the input 
ports when the unit is unused for long periods 
of time. •  When unplugging the plug, always hold 
the wide slot, do not touch the metal part, and 
do not destroy, refit, twist, pull or roast the 
power cord. •  Please contact the service center 
immediately if you found that the core is  showed in the air or has been broken.
•  Please replace the AC outlet if the metal 
bolt cannot be inserted into the power socket 
completely or it cannot be fastened even when 
it was pushed in, otherwise, any accidents of 
shocks and fires would happen. •  Never touch the antenna lie or power plug 
if it stars to thunder. •  Do not touch the power plug with wet 
hands. •  Do not use any non-rated power socket 
with numerous devices jointed on one power 
socket or cable device. The wire of non-
designated capacity may cause the fire due to 
the generation of heat. •  All instructions must be read and 
understood well before you operate the unit. 
Heed all warnings and follow all instructions. •  Please use the accessories provided 
by the manufacturer. Using inadequate 
accessories may result in accidents. •  Please adjust the product through the 
panel buttons or the remote controller, do 
not remove the cover or attempt to service 
the product by yourself. Do not disassemble 
back cover and do not make maintenance by 
yourself to avoid the electric shock. •  Over-press the panel may destroy the 
product. •  Do not place the product on an unstable 
cart, stand surface, tripod, bracket, or table. 
The product may fall, causing serious accidents 
as well as the damage to the product.  •  Please place the product on a flat surface 
Downloaded From TV-Manual.com Manual” 
						

							Installation
Wall mounting
For wall mounting the back panel of this 
unit is equipped with 4 screw holes (4 mm 
diameter, 100 mm horizontal/vertical spread 
distance). A wall-mount bracket should be 
used for wall mounting (the bracket is not 
included and should be acquired separately). 
Manufacturer is not responsible for improper 
mounting resulting in damage of the unit.
Stand installationPlace the TV on a solid flat surface. Use soft 
material to place over the screen to avoid any 
damage. Put the stand to the back side of the 
cabinet so that the screw holes were alined, 
then fix the stand to the cabinet with 2 screws 
as shown below. Use the third screw to fix the 
stand from the bottom.
4
Before you start
in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity.
•  Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment. •  Fasten the wheel of the product or shelf 
with wheels when installing this product. If it 
moves or is tipped over, it may be damaged. •  Do not place any fire source such as 
candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire. •  Do not place the unit into closed space 
of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at least 10 cm 
at above, left and right of the TV. •  Please place all the signal cords behind of 
rear panel. •  Do not overexert or touch the panel when 
you convey the product. Do not transfer the 
LED TV up or down display direction. •  Do not transport it with the power cord 
or the connection cable connected. If you 
move this product with the power cord or the 
connection cable connected, the damaged 
power cord, connection cable or connection 
terminal may cause the fire, the electric shock 
or breakdown. •  2 persons or more shall transport the 
device, which is heavier than 18 kg. If you drop 
or tip over the device, it can be damaged. •  The temperature of the product’s body 
becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.
All images provided herein are schematic 
drawings and may differ from of real objects.
 
						

							5
Connection
Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources (Including 
DVD, VCDR, CAMCORDER and PC) to the 
proper Audio input jacks ‘L’ and ‘R’. •  Connect the video source to the 
Composite video jack by RCA cable. •  If the video source has a SCART output 
jack, you can connect the signal to the monitor 
by the SCART cable (not included). •  Component input Y/Pb/Pr is intended 
to receive component video signal from the 
external device. •  Connect the power cord to the DC 
adaptor, then connect the adapter to the DC 
power jack of this unit. •  When using the LED as a computer 
screen, connect the PC to the VGA jack from 
the monitor by the relevant cable (not included). •  This unit has PC audio in jack. Connect 
this jack to PC main unit with related audio 
cable in PC mode and adjust the volume to 
what you want. •  If the video source has a HDMI output 
jack, you can connect the signal to the monitor 
by the HDMI cable (not included). •  Connect your headphones or earphones 
(not included) to the headphone socket of 
this unit. When earphones are connected, the 
sound output through the built-in speakers of 
this unit is mute. •  Coaxial output is intended for transmitting 
multi-channel sound to an external decoder 
(e.g. in 5.1-CH format). RCA cable should be 
used for connection.
75 Ohm co-axis cable
TVRF antenna jack
Antenna cable connector
Downloaded From TV-Manual.com Manual” 
						

							6
Operation
Control elements    
Front panel
1
2
1. Power indicator
2. IR sensor
 
1. Power button
2. MENU button
3. VOL-/LEFT/VOL+/RIGHT buttons
4. CH-/DOWN/CH+/UP buttons
5. TV/AV button
6. RF antenna jack
7. Stereo audio input (white=left; 
red=right)
8. Composite video input
9. Component video input (YPbPr)
10. DC adapter input
11. USB port
12. HDMI input
13. VGA input 
14. PC audio input
15. SCART connector
16. Headphone jack
17. Coaxial output
Back panel
123 45
67
8
9
10 1112 1314 15 1617
Downloaded From TV-Manual.com Manual” 
						

							7
Operation
Remote controller (RC)
119
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1.  POWER button
2.  Number buttons
3.  Zzz button
4.  ASPECT button
5.  VOL+/VOL- buttons
6.  DISPLAY button
7.  ENTER button/cursor buttons (
///)
8.  MENU button
9.  P.MODE button
10. INPUT button
11. 
/HOLD button 
12. /TEXT button 13. 
/INDEX button
14.  /SIZE button
15.  FAV button
16.  FAV- button
17.  Red button
18.  Green button
19.  AUTO button
20.  MUTE button
21.  
 button
22.  NICAM button
23.  CH+/CH- buttons
24.  EXIT button
25.  S.MODE button
26.  ROOT button
27.  
/REVEAL button
28.  /SUBPAGE button
29.  A-B button
30.  REPEAT button
31.  GOTO button
32.  FAV+ button
33.  Cyan button
34.  Yellow button
Changing the battery1.  Remove the battery compartment cover 
on the back of the RC. 2.  Insert two AAA batteries into the battery 
compartment making sure that the correct 
polarity is observed. 3.  Install the cover back.
•  The RC should be pointed at the IR-sensor 
within 8 meters and within 30 degrees at the 
left or the right side. •  Take the battery out of the RC if it is not 
used for a long time. Do not mix new and used 
batteries or different types of batteries. Weak 
batteries can leak and severely damage the RC. •  Do not expose the RC to shock, liquids, and 
do not place it in an area with high humidity.
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the power, the indication light 
will be in green color. Press POWER button 
again to switch off the power, and the light will 
be in red color. •  The picture setup, sound setup, previous 
channel can be memorized before you switch 
off the unit. The unit will restart under the 
previous state when you switch on it again. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume from 0 to 100. •  Press Zzz button repeatedly to set the 
sleep time (from 0 to 240 min). •  Select the TV function mode. Channel 
‘1’ will appear on the left bottom corner 
after channel searching is completed. Press 
CH-/CH+ buttons to select previous or next 
channels; or press number buttons to enter a 
channel number directly. •  Press 
 button on the RC to select 
from the present channel and the previously 
displayed channel. •  Press NICAM button in TV mode 
repeatedly to switch between different Nicam 
sound modes (can be unavailable for some 
channels). •  Press P.MODE button repeatedly to cycle 
through the available video picture modes from 
the following 4 types: Dynamic => Standard => 
Mild => User. •  Press S.MODE button repeatedly to cycle 
through the available sound modes from the 
following 5 types: Movie => Sports => User => 
Standard => Music. •  Press FAV button to show the favourite 
channel list. Press FAV+/FAV- buttons to select 
next or previous favorite channel. •  Press MUTE button to cut off sound, press 
this button again or adjust volume to resume 
sound. •  Press DISPLAY button to display the 
preset TV channel play information. •  Press ASPECT button repeatedly to select  a screen display size from the available list: 
16:9/ZOOM1/ZOOM2/Auto/4:3/Just Scan.
  Available aspects may differ for different 
signal sources.
Signal sourcesPress INPUT button on the RC or TV/AV 
button on the unit, then press UP/DOWN cursor 
buttons to cycle through the available source list 
as follows: TV - AV - SCART - YPBPR - HDMI - 
PC - Media. Press ENTER button to confirm.
TELETEXT operations (option)•  Press INPUT button to select the TV 
mode. Then press CH-/CH+ buttons to select 
TV channel in order to pick up the picture 
signal of TELETEXT. •  Press CH-/CH+ buttons to select the 
previous page or the next page; use number 
buttons to enter into a page. •  Teletext button functions are as follows:
TEXT: Press TEXT button to enter into 
TEXT mode. Press this button again to return 
to the channel you are watching. HOLD: Press this button to stop the move to 
the next page, and the hold symbol will appear 
in the top left hand corner of the screen. Press 
this button again to cancel operation. INDEX: Press this button to go to the index 
page. SIZE: Press this button to enlarge the text 
shown on the teletext screen, and one half of 
page could be shown. Press this button again 
to view the second half of this page. Press this 
button third time to normal size text page view. REVEAL: Press this button to reveal the 
cancelled information. Press this button again 
to cancel the information. SUBPAGE: Press this button to select sub 
page, and the sub-page symbol will appear in 
the left top hand corner of the screen. Enter the 
number of sub page and use numeric buttons 
in the format 0001 for sub page 1. The teletext 
will search for the sub page. Red/Green/Yellow/Blue buttons: Press 
these 4 color buttons to access directly to 
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
corresponding color page displayed at the 
lower parts of teletext screen.
PC screenSelect the PC input (TV into PC) mode. The 
unit has a VGA jack for a normal computer. 
Connect the monitor with a PC by this jack and 
the unit can be used as the monitor for the PC.
OSD operation
1. Press MENU button to enter the setting 
menu displayed on the screen. 2. Press LEFT/RIGHT cursor buttons on the 
RC or VOL+/- buttons on the panel to select 
setting page. 3. Press DOWN cursor button or ENTER 
button on the RC or CH+ button on the panel 
to go to the parameter list. 4. Press UP/DOWN cursor buttons on the 
RC or CH+/- buttons on the panel to select a 
parameter to adjust. 5. Press cursor buttons on the RC or VOL+/- 
or CH+/- buttons on the panel to adjust the 
selected parameter. 6. Press MENU button to return to the 
previous menu page.
  Some menu items may be in grey color, 
in this case they are not adjustable. Pictures 
of OSD menu are for reference only; they may 
differ from the real screens.
Channel setting (only for TV source)
CHANNEL
Auto tuning
TV Manual tuning
Programme edit
Move Menu OKExit
•  Auto tuning: press LEFT/RIGHT buttons 
to start automatic search of available channels. 
To stop the process press MENU button.
•  TV Manual tuning: Press ENTER button to 
enter into manual tuning menu: Current Channel: select channel number.
Color System: select corresponding color 
system. Sound System: select corresponding sound 
system. Fine-tune: perform fine adjustment of the 
current frequency. AFC: set On/Off automatic frequency 
correction.  Search: press LEFT/RIGHT buttons; the 
unit will search for next available channel 
downward or upward and save it under the 
current number. •  Program Edit: this item allows you to sort 
TV programs according to your preferences. 
Enter into program edit menu: Delete: Select the channel you want to delete. 
Press red button to delete the channel. Rename (only in TV mode): Highlight the 
needed channel. Press green button; then press 
UP/DOWN buttons to select a symbol. Press 
LEFT/RIGHT buttons to select the next symbol. 
Press ENTER button to confirm. Move: Highlight the needed channel. Press 
yellow button; select the position to put the 
channel into. Press yellow button to confirm. Skip: Highlight the needed channel. Press 
blue button; now this channel will be skipped 
when you select previous/next channels. Favorite: Select the channel you want to edit. 
If this channel is your favorite channel, you can 
add the mark 
 to the channel as your favorite 
channel by pressing FAV button.
Downloaded From TV-Manual.com Manual” 
						

							10
Operation
Picture setting
PICTURE
Picture mode
Contrast
Brightness
Color
Tint
Sharpness
Color temperature
Noise reduction
Move Menu OKExit
•  Picture Mode: Dynamic/Standard/Mild/
User. •  Contrast
•  Brightness
•  Color
•  Tint: adjust the tone of color when your 
system is in NTSC. •  Sharpness
•  Colour Temperature: Medium/Warm/Cool.
•  Noise Reduction: Digital noise reduction 
effect for reducing the video noise level: Off/
Low/Middle/High.
Sound setting
SOUND
Sound mode
Treble
Bass
Balance
Auto volume
SPDIF mode
Move Menu OKExit
•  Sound mode: Movie/Sports/User/
Standard/Music. •  Treble: adjust treble frequency.
•  Bass: adjust bass frequency.
•  Balance: adjust balance between left and 
right speaker. •  Auto volume: set the auto volume 
correction on/off. •  SPDIF mode: select PCM/Auto/Off.
Timer setting
TIMESleep timer
Auto sleep
OSD timer
Move Menu OKExit
•  Sleep timer: select the period until 
automatic switch-off of the unit (0 - 240 min). •  Auto sleep: select the period of time after 
which the unit will automatically switch off if no 
operation is done. •  OSD timer: select the period of time after 
which the OSD will be hidden (5 - 30 sec).
Option setting
OPTION
OSD language
TT language
Aspect ratio
Blue screen
Key lock
Reset
Software upgrade (USB)
Move Menu OKExit
•  OSD Language: select the language of 
the OSD menu. •  TT Language: select teletext language.
•  Aspect ratio: 16:9/ZOOM1/ZOOM2/
Auto/4:3/Just Scan. The set of available 
aspects can vary depending on the current 
signal source. •  Blue screen: set on or off blue screen 
activation when no signal. •  Key lock: select ON to lock all buttons on 
the panel. Set OFF to unlock the buttons. •  Reset: reset the parameters to initial 
factory settings.  •  Software upgrade: this option is intended 
for using by qualified technicians only.
Downloaded From TV-Manual.com Manual”