Home > Hyundai > Television > Hyundai H Led22v1 Instruction Manual

Hyundai H Led22v1 Instruction Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Hyundai H Led22v1 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 93 Hyundai manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							ТЕЛЕВИЗОР
    ЦВЕТНОГО ИЗОБРАЖЕНИЯ
    ЖИДКОКРИСТАЛЛИЧЕСКИЙ (LCD)
    LED TV
    Руководство по эксплуатации 
    Instruction manual
    H-LED22V1
     
    						
    							23
    Table of contentsBefore you start
    Dear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read 
    this manual carefully before connecting, operating and/or adjusting the product and keep 
    the manual for reference in the future.
    Table of contents 
    Before you start 
    Utilization of the product 
    Important safeguards
    Installation/connection
    Connection Outdoor antenna connection
    Other connections
    Installation
    Operation
    Control elements  Front panel
     Back panel
    Remote controller Changing the battery
    General operations  AV signal sources
     Teletext operations
     PC screen
    OSD operation Picture setting
    Sound setting
    Setting
    Function setting
    Channel setting
    PC setup
    General information
    Troubleshooting Causes of interference
    Accessories
    Specifications 2
    3
    3
    3
    5
    5
    5
    5
    6
    7
    7
    7
    7
    8
    8
    9
    9
    9
    10
    10
    10
    10
    10
    11
    11
    13
    14
    14
    14
    15
    15
    Downloaded From TV-Manual.com Manual” 
    						
    							23
    Table of contentsBefore you start
    If you want to dispose this product, do not mix it with general household waste. There is 
    a separate collection system for used electronic products in accordance with legislation 
    that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
    you will ensure that your disposed product undergoes the necessar y treatment, recovery 
    and recycling and thus prevent potential negative effects on the environment and human 
    health.
    Utilization of the product
    Important safeguards
    •  Before connecting the AC power cord 
    to the DC adapter outlet, make sure that 
    the voltage designation of the DC adapter 
    corresponds to the local electrical supply.
    •  Accessories include a DC adaptor RS-
    330/120-S325. Do not use other adaptors with 
    this unit. •  Please unplug the power cord from the AC 
    outlet and contact a service center for repair 
    if following occurs: any obvious abnormality 
    appears in the unit, such as smoky, peculiar 
    smell or strange sound; liquid has been spilled or 
    other objects have fallen into the unit; no picture 
    or sound; cover or panel is broken; although you 
    have operated the unit following the operating 
    instructions, it still cannot work normally. •  This unit should only be connected to a 
    wall socket having grounding. •  Always disconnect the power cord and 
    antenna during a storm. •  Do not fix the power cord with a metal nail.
    •  Unplug the power cord from the AC outlet; 
    also unplug the signal cables from the input 
    ports when the unit is unused for long periods 
    of time. •  When unplugging the plug, always hold 
    the wide slot, do not touch the metal part, and 
    do not destroy, refit, twist, pull or roast the 
    power cord. •  Please contact the service center  immediately if you found that the core is 
    showed in the air or has been broken.
    •  Please replace the AC outlet if the metal 
    bolt cannot be inserted into the power socket 
    completely or it cannot be fastened even when 
    it was pushed in, otherwise, any accidents of 
    shocks and fires would happen. •  Never touch the antenna lie or power plug 
    if it stars to thunder. •  Do not touch the power plug with wet 
    hands. •  Do not use any non-rated power socket 
    with numerous devices jointed on one power 
    socket or cable device. The wire of non-
    designated capacity may cause the fire due to 
    the generation of heat. •  All instructions must be read and 
    understood well before you operate the unit. 
    Heed all warnings and follow all instructions. •  Please use the accessories provided 
    by the manufacturer. Using inadequate 
    accessories may result in accidents. •  Please adjust the product through the 
    panel buttons or the remote controller, do 
    not remove the cover or attempt to service 
    the product by yourself. Do not disassemble 
    back cover and do not make maintenance by 
    yourself to avoid the electric shock. •  Over-press the panel may destroy the 
    product. •  Do not place the product on an unstable 
    cart, stand surface, tripod, bracket, or table. 
    The product may fall, causing serious accidents 
    Downloaded From TV-Manual.com Manual” 
    						
    							4
    Before you start
    as well as the damage to the product. •  Please place the product on a flat surface 
    in a well-ventilated location. Keep it away from 
    the burning-light, direct sunlight, vibration, 
    high-temperature and humidity. Store the 
    product with a temperature from –20
    0C ~500C; 
    otherwise you may destroy the product.  • Do not place any vase, potted plant, cup, 
    medicine and any container with water on this 
    product. If the liquid is spilt, it may cause the 
    fire, electric shock or breakdown. •  Do not install it at the place on the strong 
    magnetic field or current field. It may cause 
    break down. This equipment may be observed 
    deterioration of the picture by electromagnetic 
    radiation in electromagnetic environment. •  Fasten the wheel of the product or shelf 
    with wheels when installing this product. If it 
    moves or is tipped over, it may be damaged. •  Do not place any fire source such as 
    candlelight close to this product or place it on 
    this product. If it is tipped over or fallen down, it 
    may cause damage or fire. •  Do not place the unit into closed space 
    of TV for better ventilation; it can reduce the 
    product lifetime. Keep a space at list 10 cm at 
    above, left, and right of the TV. •  Please place all the signal cords behind of 
    rear panel. •  Do not overexert or touch the panel when 
    you convey the product. Do not transfer the 
    LCD TV up or down display direction. •  Do not transport it with the power cord 
    or the connection cable connected. If you 
    move this product with the power cord or the 
    connection cable connected, the damaged 
    power cord, connection cable or connection 
    terminal may cause the fire, the electric shock 
    or breakdown. •  2 persons or more shall transport the 
    device, which is heavier than 18 kg. If you drop 
    or tip over the device, it may damage it. •  The temperature of the product’s body 
    becomes a little higher after a long period use. 
    This phenomenon indicates that heat exchange 
    in normal working mode, thus please do not  let children or anyone who is sensitive of 
    temperature to touch.
    All images provided herein are schematic 
    drawings of real objects and may differ 
    from their real images.
     
    						
    							5
    Сonnection/Installation
    Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75 Ω 
    impedance converter to plug in antenna input 
    terminal on the rear of the cabinet.
    Other connections•  Connect the audio sources (Including 
    DVD, VCDR, CAMCORDER and PC) to the 
    proper AUDIO input jacks ‘L’ and ‘R’. •  Connect the video source to the VIDEO 
    jack by RCA cable. •  If the video source has a SCART output 
    jack, you can connect the signal to the monitor 
    by the SCART cable. •  Component input Y/Pb/Pr is intended 
    to receive component video signal from the 
    external device. •  Insert the AC power to the DC adaptor, 
    then connect 12V input jack from the monitor 
    to it’s DC output jack.
    Connection
    •  When using the LCD as a computer 
    screen, connect the PC to the VGA jack from 
    the monitor by the relevant cable. •  This unit has PC audio in jack. Connect 
    this jack to PC main unit with related audio 
    cable in PC mode and adjust the volume to 
    what you want. •  If the video source has a HDMI output 
    jack, you can connect the signal to the monitor 
    by the HDMI cable.
    •  Connect your headphones or earphones 
    (not included) to the headphone socket of 
    this unit. When earphones are connected, the 
    sound output through the built-in speakers of 
    this unit is mute.
    75 Ohm co-axis cable
    TVRF antenna jack
    Antenna cable connector
    Downloaded From TV-Manual.com Manual” 
    						
    							6
    Connection/Installation
    Installation
    1.  Place the LCD TV on a solid flat surface. 
    Use soft material to place over the front screen 
    to avoid any damage.  2.  Use 1 piece screw (2822 3 x 8) included to 
    attach the unit to the stand as per the diagram. 
    Downloaded From TV-Manual.com Manual” 
    						
    							7
    Operation
    Control elements    
    Front panel
    Back panel
    1. TVRF antenna jack
    2. Audio in (left) jack
    3. Audio in (right) jack
    4. Video input
    5. Component (YPbPr) input
    6. DC power input 7. HDMI input
    8. VGA input
    9. PC audio input
    10. SCART connector
    11. Earphone output
    12. POWER button13. MENU button
    14. VOL-/LEFT cursor button
    15. VOL+/RIGHT cursor button
    16. CH-/DOWN cursor button
    17. CH+/UP cursor button
    18. TV/AV button1. Power indicator
    2. Remote control sensor
    6
    789 10 11 121314 1516 1718 1
    2
    3
    4
    5
    1
    2
    Downloaded From TV-Manual.com Manual” 
    						
    							89
    OperationOperation
    Remote controller (RC)
    1.  POWER button
    2.  Number buttons
    3.  ASPECT button
    4.  VOL+/VOL- buttons
    5.  DISPLAY button
    6.  ENTER button/cursor buttons (
    ///)
    7.  MENU button
    8.  P.MODE button
    9.  INPUT button
    10. HOLD button 
    11. TEXT button
    12. INDEX button
    13. SIZE button 14.  RED button
    15.  GREEN button
    16.  AUTO button
    17.  MUTE button
    18.  
     button
    19.  NICAM button
    20.  CH+/CH- buttons
    21.  EXIT button
    22.  S.MODE button
    23.  SLEEP button
    24.  PGUP button
    25.  PGDW button
    26.  SUBPAGE button
    27.  REVEAL button
    28.  CYAN button
    29.  YELLOW button
    Changing the battery1.  Remove the battery compartment cover 
    on the back of the RC. 2.  Insert the batteries into the battery 
    compartment making sure that the correct 
    polarity is observed. 3.  Install the cover back.
    •  Use two AAA batteries for the RC. The RC 
    should be pointed at remote sensor within 8 
    meters and within 30 degrees at the left or the 
    right side. •  Take the battery out of the RC if it is not 
    used for a long time. •  Do not mix new and used batteries or 
    different types of batteries. Weak batteries can 
    leak and severely damage the RC. •  Do not expose the RC to shock, liquids, 
    and do not place it in an area with high 
    humidity.
    1 23
    1 16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    Downloaded From TV-Manual.com Manual” 
    						
    							89
    OperationOperation
    General operations
    •  Press POWER button on the unit or on the 
    RC to switch on the power, the indication light 
    will be in green color. Press POWER button 
    again to switch off the power, and the light will 
    be in red color. •  The picture setup, sound setup, previous 
    channel can be memorized before you switch 
    off the unit. The unit will restart under the 
    previous state when you switch on it again. •  Press VOL- button repeatedly to decrease 
    the volume; press VOL+ button repeatedly to 
    increase the volume from 0 to 100. •  Press SLEEP button repeatedly to set the 
    sleep time (from 0 to 120 min). •  Press INPUT button on the RC to select 
    the TV function mode. Channel ‘1’ will appear 
    on the right top corner after channel searching 
    is completed. Press CH-/CH+ buttons to select 
    previous or next channels; or press number 
    buttons to enter a channel number directly; 
    or press [-/--] button until the screen displays 
    ‘-’ or ‘--’, then use number buttons to enter a 
    channel number from 1 to 99. •  Press 
     button on the RC to select 
    from the present channel and the previously 
    displayed channel. •  Press P.MODE button repeatedly to cycle 
    through the available video picture modes from 
    the following 4 types: Personal => Standard => 
    Movie => Vivid. •  Press S.MODE button repeatedly to 
    cycle through the available sound modes from 
    the following 4 types: Music => Personal => 
    Standard => Movie. •  Press MUTE button to cut off sound, press 
    this button again or adjust volume to resume 
    sound. •  Press DISPLAY button to display the 
    preset TV channel play information. •  Press ASPECT button repeatedly to select 
    a screen display size from the available list: Full 
    => ZOOM => Subtitle => 4:3 => 14:9 => Auto.
      Available aspects may differ for different 
    signal sources.
    AV signal sourcesPress INPUT button on the RC, then press / cursor buttons to cycle through 
    the available source list as follows: ATV - 
    HDMI - SCART - YPBPR - AV - VGA . Press 
     
    cursor button to confirm.
    TELETEXT operations (option)•  Press INPUT button to select the TV 
    mode. Then press CH-/CH+ buttons to select 
    TV channel in order to pick up the picture 
    signal of TELETEXT. •  Press PGUP/PGDW buttons to select the 
    previous page or the next page; use number 
    buttons and the [-/- -] button to enter into a page. •  Teletext button functions are as follows:
    TEXT: Press TEXT button to enter into 
    TEXT mode. Press this button again to return 
    to the channel you are watching. PGDW: Press this button to view the next 
    teletext page’s program. PGUP: Press this button to view the previous 
    teletext page’s program. HOLD: Press this button to stop the move to 
    the next page, and the hold symbol will appear 
    in the top left hand corner of the screen. Press 
    this button again to cancel operation. INDEX: Press this button to go to the index 
    page. SIZE: Press this button to enlarge the text 
    shown on the teletext screen, and one half of 
    page could be shown.  Press this button again to view the second 
    half of this page.  Press this button third time to normal size 
    text page view. REVEAL: Press this button to reveal the 
    cancelled information. Press this button again 
    to cancel the information. SUBPAGE: Press this button to select sub 
    page, and the sub-page symbol will appear in 
    the left top hand corner of the screen. Enter the 
    number of sub page and use numeric buttons 
    in the format 0001 for sub page 1. The teletext 
    will search for the sub page. Red/Green/Yellow/Blue buttons: Press 
    these 4 color buttons to access directly to 
    Downloaded From TV-Manual.com Manual” 
    						
    							10
    Operation
    corresponding color page displayed at the 
    lower parts of teletext screen.
    PC screenSelect the VGA input (TV into PC) mode. 
    The unit has a VGA jack for a normal 
    computer. Connect the monitor with a PC 
    by this jack and the unit can be used as the 
    monitor for the PC.
    OSD operation
    Press MENU button on the RC to enter the 
    OSD menu. Use use 
    / buttons to select a 
    setting page displayed on the screen. Press 
    / buttons to go to the needed 
    item, then use 
    / buttons to select available 
    setting or to adjust the selected item. Press 
    ENTER button to confirm After setting, press MENU button to return 
    to the root menu or press EXIT button to exit 
    menu setting.
    Picture setting
    PICTURE
    MOVE SELECT EXIT
    PICTURE MODE
    CONTRAST
    BRIGHTNESS
    COLOR
    TINT
    SHARPNESS
    COLOR TEMP.
    NOISE REDUCTION
    •  Picture Mode: Personal/Standard/Movie/
    Vivid. •  Contrast
    •  Brightness
    •  Color
    •  Tint: adjust the tone of color when your 
    system is in NTSC. •  Sharpness •  Color Temperature: Normal/Warm/Cool.
    •  Noise reduction: Digital noise reduction 
    effect for reducing the video noise level: Off/
    On, if the broadcast signal received is weak.
    Sound setting
    SOUND
    MOVE SELECT EXIT
    SOUND MODE
    BASS
    TREBLE
    BALANCE
    AVL
    •  Sound Mode: Music/Personal/Standard/
    Movie. •  Bass
    •  Treble
    •  Balance: adjust output between left and 
    right speakers. •  AVL: set the auto volume leveller on/off.
    Setting
    SETTING
    MOVE SELECT EXIT
    LANGUAGE
    OSD TIMER
    TRANSPARENCE
    OVERSCAN
    RESET
    •  Language: select an OSD menu language
    •  OSD Timer: select OSD menu display last 
    time. •  Transparence: set the level of the OSD 
    window transparence. •  Overscan: set ON or OFF enlargement 
    of the OSD window (function available only in 
    Downloaded From TV-Manual.com Manual” 
    						
    All Hyundai manuals Comments (0)

    Related Manuals for Hyundai H Led22v1 Instruction Manual