IBM M400 Projector User Manual
Here you can view all the pages of manual IBM M400 Projector User Manual. The IBM manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
Operating range This remote control uses infrared transmission to control the projector. It is not necessary to point the remote directly at the projector. Provided you are not holding the remote to the sides or the rear of the projector, the remote will function within a maximum radius of 7m (22ft) and 30° above or below the projector level. If the projector does not respond...
Page 32
4-4 IBM M400 PROJECTOR: User ’s Guide
Page 33
Chapter 5. On-Screen Display menu controls This projector has an On-Screen Display (OSD) that lets you make image adjustments and change various settings. Note: Yo u must have a display on the screen in order to access the OSD. Navigating the OSD Yo u can use the remote control or the buttons on the top of the projector to navigate and make changes to the OSD. The following...
Page 34
Item Description Default Contrast Press the cursor left/right button to adjust the contrast. Range: -50 to 50 0 Picture Adjustment Press the cursor left/right button to adjust the A/D sampling number. Range: -50 to 50 0 Fine Picture Press the cursor left/right button to adjust the A/D sampling clock. Range: -50 to 50 Auto-detected H Position Press the cursor left/right button to...
Page 35
3. Press the cursor up/down button to move within the Color menu. The color menu is shown below. The following table shows the options that you will see in the Color menu and the default. Item Description Default Quick Color Adj. Press the cursor left/right button to select different Color Adjust. Range: Standard/Color/Custom Standard Gamma Press the cursor left/right button...
Page 36
View menu To access the View menu, follow the steps below: 1. Press the Menu button to open the main menu. 2. Press the cursor left/right button to move to the View menu. 3. Press the cursor up/down button to move up and down in the View menu. The View menu is shown below. The following table shows the options that you will see in the View menu and...
Page 37
Item Description Default Keystone Save Press the cursor left/right button to select keystone save. Range: Off/On On Digital Zoom Digital Zoom N/A Panning Use the ↑,→,↓,← buttons to pan in the Digitally zoomed image. N/A Cancel Reset Aspect, Filter, Vertical Flip, Horizontal Flip, Keystone, and Keystone Save to default values. N/A Setup menu To access the View menu, follow the steps...
Page 38
Item Description Default Auto Power Off Press the cursor right/left button to select. This will automatically turn off the lamp when there is no signal to the projector for 5 minutes. Range: On/Off Off Menu Position Press the cursor left/right button to select different OSD locations. Range: Left/Top/Center/Right/Bottom Center Input Format Change the input format menu. Auto Presentation...
Page 39
The following table shows the options that you will see in the Option menu and the default. Item Description Default Language Change the Language Range: English/German/French/Italian/ Spanish/Swedish/Korean /Simplified Chinese/ Traditional Chinese/Japanese English On Screen Press the cursor left/right button to select the on-screen menu. Range: On/Off On Background Press the cursor left/right button...
Page 40
3. Press the cursor up/down button to move up and down in the Info menu. The Info menu is shown below. The following table shows the options that you will see in the Info menu. Item Description Factory Default Change factory default message menu. Lamp Timer Reset Reset the lamp timer. Resolution Shows Resolution H/V format. Frequency Shows Frequency H/V information. Lamp...