Icom Ic-A110 Vhf Airband Tranciever Instruction Manual
Have a look at the manual Icom Ic-A110 Vhf Airband Tranciever Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 Icom manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 14
OTHER FUNCTION5
11
DPriority channel
The priority channel is used to store your most often-used
channel for quick recall. In addition the priority channel is
monitored during priority scan modes. The default setting for
the priority channel will differ depending on pre-programming.
➥Push [PRI] to toggle the prior-
ity channel mode or previous
mode.
•Setting the priority channel
qWhile pushing and holding [V/M] and [DIAL(TS)], push
[POWER] to turn the power ON.
• The transceiver enters initial set mode....](http://img.usermanuals.tech/thumb/2452/82228/w64_icom_ic-a110-vhf-airband-tranciever_manual_d-13.png "Page 14
OTHER FUNCTION5
11
DPriority channel
The priority channel is used to store your most often-used
channel for quick recall. In addition the priority channel is
monitored during priority scan modes. The default setting for
the priority channel will differ depending on pre-programming.
➥Push [PRI] to toggle the prior-
ity channel mode or previous
mode.
•Setting the priority channel
qWhile pushing and holding [V/M] and [DIAL(TS)], push
[POWER] to turn the power ON.
• The transceiver enters initial set mode....")
![Page 17
14
7CLONING
DData cloning
Cloning allows you to quickly and easily
transfer the programmed contents from one transceiver to
another transceiver, or, data from PC to a transceiver using
the optional CS-A110 cloning software.
DTransceiver to transceiver cloning
qConnect the OPC-591 CLONING CABLE with adapter plugs to
the [MIC] jack of the master and slave transceivers.
•The master transceiver is used to send data to the slave trans-
ceiver.
wWhile pushing and holding [Y] + [Z] + [V/M], push
[POWER] ON...](http://img.usermanuals.tech/thumb/2452/82228/w64_icom_ic-a110-vhf-airband-tranciever_manual_d-16.png "Page 17
14
7CLONING
DData cloning
Cloning allows you to quickly and easily
transfer the programmed contents from one transceiver to
another transceiver, or, data from PC to a transceiver using
the optional CS-A110 cloning software.
DTransceiver to transceiver cloning
qConnect the OPC-591 CLONING CABLE with adapter plugs to
the [MIC] jack of the master and slave transceivers.
•The master transceiver is used to send data to the slave trans-
ceiver.
wWhile pushing and holding [Y] + [Z] + [V/M], push
[POWER] ON...")
18 9OPC-871 •Use the upper side mounting hole. •You can mount the attachment on either side of the transceiver. •Bent the plastic dust cover before install the strain relief into the notch. Fig. 3Fig. 2
19 10OPTIONS DOther options OPC-871HEADSET ADAPTER (See pgs. 17-18) CS-A110CLONING SOFTWARE Provides quick and easy programming of items, including pri- vate channels, scan settings, etc., via an IBM®compatible PC (Microsoft®Windows®95/98) to transceiver. OPC-478 CLONING CABLE OPC-592CLONING CABLE ADAPTOR These three components work as one set and provide a quick and easy programming of items, including memory channels, memory names and set mode contents, etc. via a PC. OPC-591CLONING CABLE Cloning cable for transceiver to transceiver. Very convenient when programming cloning process. Allows transfer of pro- grammed contents from one transceiver to another. IBM®is a registered trademark of International Business Machines. Microsoft and Windows are registered trademarks of Microsoft Cor- poration in the U.S.A. and other countries.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan A-5616H-1EX-q Printed in Japan © 1999 Icom Inc.