Iiyama Prolite B2206ws 1 User Manual
Have a look at the manual Iiyama Prolite B2206ws 1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 49 iiyama manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEUTSCH FRANCAIS ENGLISH USER MANUAL Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference. NEDERLANDS
ENGLISH Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics • Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy • Energy-saving mode after a certain time – beneficial both for the user and the environment • Electrical safety Emissions • Electromagnetic fields • Noise emissions Ecology • The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001 • Restrictions on o chlorinated and brominated flame retardants and polymers o heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user- friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com
ENGLISH CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC Directive” and 2006/ 95/EC “Low Voltage Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system. „We reserve the right to change specifications without notice. „All trademarks used in this user manual are the property of their respective owners. „As an E NERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
ENGLISH FOR YOUR SAFETY........................................................................................... 1 SAFETY PRECAUTIONS.............................................................................. 1 SPECIAL NOTES ON LCD MONITORS.......................................................... 3 CUSTOMER SERVICE................................................................................... 3 CLEANING.................................................................................................... 3 BEFORE YOU OPERATE THE MONITOR............................................................. 4 FEATURES.................................................................................................... 4 CHECKING THE CONTENTS OF THE PACKAGE.......................................... 4 FITTING AND REMOVAL OF BASE.............................................................. 5 CONTROLS AND CONNECTORS................................................................. 6 CONNECTING YOUR MONITOR................................................................... 7 COMPUTER SETTING.................................................................................... 8 ADJUSTING THE HEIGHT AND THE VIEWING ANGLE................................. 8 OPERATING THE MONITOR................................................................................ 9 ADJUSTMENT MENU CONTENTS................................................................. 10 SCREEN ADJUSTMENTS.............................................................................. 16 POWER MANAGEMENT FEATURE............................................................... 19 TROUBLE SHOOTING......................................................................................... 20 RECYCLING INFORMATION................................................................................ 21 APPENDIX........................................................................................................... 22 SPECIFICATIONS.......................................................................................... 22 DIMENSIONS................................................................................................. 23 COMPLIANT TIMING...................................................................................... 23 TABLE OF CONTENTS We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address:http://www.iiyama.com You can access the Web page of different countries from there.
ENGLISH 1 FOR YOUR SAFETY FOR YOUR SAFETY WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock. DO NOT PUT ANY OBJECT INTO THE MONITOR Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause fire, electric shock or damage. INSTALL THE MONITOR ON A FLAT, STABLE SURFACE The monitor may cause an injury if it falls or is dropped. DO NOT USE THE MONITOR NEAR WATER Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric shock. OPERATE UNDER THE SPECIFIED POWER SUPPLY Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock. PROTECT THE CABLES Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables. If damaged, the cables may cause fire or electric shock. ADVERSE WEATHER CONDITIONS It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause electric shock. SAFETY PRECAUTIONS
ENGLISH CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury. MAINTAIN GOOD VENTILATION Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls. Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also cause damage. DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable is disconnected. If you do not disconnect them, it may cause fire or electric shock. UNPLUG THE MONITOR If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents. HOLD THE PLUG WHEN DISCONNECTING To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause fire or electric shock. DO NOT TOUCH THE PLUG WITH WET HANDS Pulling or inserting the plug with wet hands may cause electric shock. WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer. DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field produced by the speakers if the disks are placed on or near the speakers. ERGONOMIC RECOMMENDATIONS To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain. OTHERS FOR YOUR SAFETY 2
ENGLISH The following symptoms are normal with LCD monitors and do not indicate a problem. NOTEWhen you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. „ Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours. „You may find slightly uneven brightness on the screen depending on the desktop pattern you use. „ SPECIAL NOTES ON LCD MONITORS Contact your dealer or iiyama service center for the backlight replacement when the screen is dark, flickering or not lighting up. Never attempt to replace it by yourself. „Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. „ NOTEThe fluorescent light used in the LCD monitor may have to be periodically replaced. For the warranty coverage on this component, please check with local iiyama service center. If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging. „ „ WARNINGIf you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediately and contact your dealer or iiyama service center. „ CAUTIONFor safety reasons, turn off the power switch and unplug the monitor before you clean it. „ NOTETo protect the LCD panel, do not scratch or rub the screen with a hard object. „ Never use any of the following strong solvents. These will damage the cabinet and the LCD screen. „ Thinner Benzine Abrasive cleanerSpray-type cleaner Wax Acid or Alkaline solvent Touching the cabinet with any product made from rubber or plastic for a long time may cause degeneration or loss of paint on the cabinet. „ CABINETStains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the cabinet with a soft dry cloth. LCD SCREENPeriodic cleaning with a soft dry cloth is recommended. Dont use tissue paper etc. because these will damage the LCD screen. CUSTOMER SERVICE CLEANING 3 FOR YOUR SAFETY
ENGLISH The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office. * The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a power supply higher than this rating, then a power cable with a rating of 10A/ 250V must be used.However, all guarantees and warranties are void for any problems or damage caused by a power cable not supplied by iiyama. „Power Cable*„D-Sub Signal Cable„DVI-D Cable „Audio Cable„Stand-Base„Screw for stand fixing „User Manual CAUTION BEFORE YOU OPERATE THE MONITOR CHEKING THE CONTENTS OF THE PACKAGE CAUTION FEATURES ‹ ‹‹ ‹ ‹Supports Resolutions up to 1680 × 1050 ‹ ‹‹ ‹ ‹High Contrast 1000:1 Typical, ACR Function Available / Brightness 300cd/m 2 / Quick Response Time 5ms (Typical) ‹ ‹‹ ‹ ‹Digital Character Smoothing ‹ ‹‹ ‹ ‹Automatic Set-up ‹ ‹‹ ‹ ‹Stereo Speakers 2 × 1W Stereo Speakers ‹ ‹‹ ‹ ‹Plug & Play VESA DDC2B Compliant Windows ® 95/98/2000/Me/XP/Vista Compliant ‹ ‹‹ ‹ ‹Power Management (E NERGY STA R® VESA DPMS Compliant) ‹ ‹‹ ‹ ‹Ergonomic Design: TCO ’03 ‹ ‹‹ ‹ ‹VESA Mounting Standard (100mm×100mm) Compliant ‹ ‹‹ ‹ ‹Keyhole for Security Lock BEFORE YOU OPERATE THE MONITOR 4
ENGLISH 5 BEFORE YOU OPERATE THE MONITOR Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. „ Do not give a strong impact to the monitor. It may cause damage. „ Unplug the monitor before removal or installation to avoid electric shock or damage. „ The monitor is supplied complete with a stand-base. If you prefer to wall mount the monitor, please follow the instructions below to remove the stand-base. Be sure to include the stand with the monitor if it is necessary to return the unit.CAUTION FITTING AND REMOVAL OF BASE APut a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down. BInstall the Stand-Base to the Monitor. CFix the Monitor with the Stand by the screw firmly, and the knob of the screw push down. APut a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down. BPull up the knob of the screws, and remove the screw and the Stand-Base. Please stand the monitor and then remove the stopper pin on the back of the stand slowly while pushing top face of the stand before you install the monitor. Careful attention is required as the monitor is sprung loaded and may expand quickly when removing it. Stopper pin Stand-Base Screw for Stand-Base fixin g The knob of the screw push down