Iiyama Prolite B2209hdsd 1 User Manual

ENGLISH
CONTROLS AND CONNECTORS 
 Power Switch (     ) 
 Power Indicator 
   Blue:  Normal operation
   Orange: Power Management
      The monitor enters into power management mode which reduces the power  
    consumption to less than 1W when receiving no horizontal and/or vertical  
    sync signal.  
 Menu / Select Button (MENU)  
  + / Volune Button ( + )
  - / ECO Mode Button ( - )        
   Auto Button (AUTO)
 Speakers 
  AC Connector (AC IN)
 Cable Holder
 Keyhole for Security Lock 
          You...

ENGLISH
CONNECTING YOUR MONITOR
 Ensure that both the computer and the monitor are switched off.
 Connect the computer to the monitor with the signal cable.
 Connect the monitor to the audio equipment with the Audio Cable for computer when using the 
audio features.
 Connect the Power Cable to the monitor fi rst and then to the power supply.
  Turn on your monitor and computer.
NOTE 

ENGLISH

ENGLISH
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT 
TIMING shown on page 23. You are also able to adjust the picture by following the button operation 
shown below. For more detailed adjustments, see page 16 for SCREEN ADJUSTMENTS.
  Press the MENU Button to start the On Screen Display feature. There are additional 
Menu items which can be switched by using the + / - Buttons.  
B  Select the Menu item which contains the...

ENGLISH
OPERATING THE MONITOR     10
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option                                      Button to Press
Luminance
Too dark 
Too bright Brightness * ContrastToo dull
Too intense
*
  Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too 
bright.
Luminance
Contrast
Brightness
Eco
Picture Mode50
50
Off
Standard
ACR
ON
Mode1 Brightness of back-light is reduced.
Mode2Brightness of back-light is reduced more than Mode1. Off...

ENGLISH
Adjustment Item Problem / Option                                      Button to Press
Image Setup
Phase*1,2
Clock*1,2
Too left
Too right
Too low
Too highH. Position*2
V. Position*2
Too narrow
Too wide
To correct fl ickering text or lines
Image Setup
Clock
Phase
H.Position
V.Position50
50
50
50
AspectFull
*1  See page 16 for SCREEN ADJUSTMENTS.
*
2 Only Analog Input.
Expansion display Full
Aspect
Expansion display of Aspect
Aspect
11     OPERATING THE MONITOR 
 

ENGLISH
OPERATING THE MONITOR     12
Adjustment Item Problem / Option                                      Button to Press
Color Temp.
Yellowish white
Bluish white
User-G User-R
User-BToo weak
Too strong User
Greenish white Normal Mode1
Mode2
High contrast DarkMode3
Color Temp.
Gamma
User-R
User-G
User-B50
50
Mode1
50
Color Temp.Warm
Gamma
Color Temp.Normal Warm
Cool
sRGB
sRGB
NOTE

ENGLISH
Language
English
DeutschEnglish
German
Français French
Japanese Portuguese
Italiano ItalianRussian
Simplifi ed Chinese 
Español SpanishPortuguese
Timeout
H.PositionOSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time 
between 5 and 60 seconds.
Adjustment Item Problem / Option                                      Button to Press
OSD Setup
V.Position
OSD Setup
H.Position
V.Position
Timeout
Language50
50
English50
13     OPERATING THE MONITOR 
 

ENGLISH
OPERATING THE MONITOR     14
See your graphic card user guide for more information 
about changing the resolution and refresh.  NOTE
Displays information regarding the current input signal coming 
from the graphic card in your computer.
Information
Adjustment Item Problem / Option                                      Button to Press
Others
ResetFactory-preset data is restored.
NoReturn to Menu. Ye s
Signal Select
At selected Auto, you can switch the input source by pressing and holding of the...

ENGLISH
Adjustment Item Problem / Option                                      Button to Press
VolumeToo soft
Too loud
Adjustment Item Problem / Option                                      Button to Press
Auto Adjust  * You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
Direct
Adjust H. / V. Position, Clock and Phase automatically.
*   For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 16 for 
SCREEN...