Iiyama Prolite E1908wsv User Manual
Have a look at the manual Iiyama Prolite E1908wsv User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 49 iiyama manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ENGLISH OPERATING THE MONITOR 17 + – F FF F F1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area. NOTE„When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2). „Another way to make the Clock adjustment is to correct the vertical wavy lines in the zebra pattern. „The picture may flicker during the Clock, H-Position and V-Position adjustment. „In case the picture frame is bigger or smaller than the data display area after the Clock adjustment, repeat steps from C. + – 2) Stretch the right side of the picture frame to the right edge of the display area by adjusting the Clock. + – C CC C CPress the Auto Button. (Auto Set-up) D DD D DAdjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Set-up. E EE E EAdjust the V-Position so that the top and bottom of the picture frame will fit to the display area. NOTE
ENGLISH NOTE„In case the strong flicker or blurs remain on a part of the screen, repeat steps F and G because the Clock may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again. „Adjust the H-Position after the Phase adjustment if the horizontal position moves during the adjustment. H HH H HAdjust the Brightness and Color Temp. to get the desired picture after you complete the Clock and Phase adjustments. Put back your favorite wallpaper. G GG G GAdjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. + – NOTE 18 OPERATING THE MONITOR
ENGLISH 0 2W 100% POWER CONSUMPTION Blue Orange Power Indicator NORMAL MODE POWER MANAGEMENT MODE Even when using the power management mode, the monitor consumes electricity. Turn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.NOTE„ It is possible that the video signal from the computer may be on while the H or V sync signal is missing. In this instance, the POWER MANAGEMENT feature may not work properly. „ POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 2W. The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again. The power management feature of this product complies with power saving requirement of E NERGY STA R® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below. The power management function, including any timer settings is configured by the operating system. Check your operating system manual for information on how this can be configured. „ OPERATING THE MONITOR 19
ENGLISH TROUBLE SHOOTING Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance. 3. Problem Check The picture does not appear. (Power indicator does not light up.) The Power Cable is firmly seated in the socket. † † †The AC socket is live. Please check with another piece of equipment. †If the blank screen saver is in active mode, touch the keyboard or the mouse. † Increase the Contrast and/or Brightness. The computer is ON. † The Signal Cable is properly connected. †The Power Switch is turned ON. A †The signal timing of the computer is within the specification of the monitor. (Power indicator is orange.)† If the monitor is in power management mode, touch the keyboard or the mouse. The screen is not synchronized.†The Signal Cable is properly connected. †The signal timing of the computer is within the specification of the monitor.B † The signal timing of the computer is within the specification of the monitor. †The video output level of the computer is within the specification of the monitor. The screen position is not in the center.†The signal timing of the computer is within the specification of the monitor. The screen is too bright or too dark. The screen is shaking. C D EThe video output level of the computer is within the specification of the monitor. † †The power voltage is within the specification of the monitor. † The signal timing of the computer is within the specification of the monitor. The computer is ON. The Signal Cable is properly connected. † † 1. If the monitor fails to operate correctly, please follow the steps below for a possible solution. (Power indicator is blue.) 20 TROUBLE SHOOTING
ENGLISH Problem Check No sound. †The Audio Cable is properly connected. †The audio output level of the audio equipment is within the specification of the monitor. F†The audio equipment (computer etc.) is ON. †The Volume is turned up. †The Mute is OFF. The sound is too loud or too quiet. G†The audio output level of the audio equipment is within the specification of the monitor. A strange noise is heard. H†The Audio Cable is properly connected. TROUBLE SHOOTING 21
ENGLISH SPECIFICATIONS LCD Panel Size Driving systema-Si TFT Active Matrix Diagonal: 48cm / 19 0.243mm H × 0.243mm V Response time Pixel pitch 5ms (Black, white, black) Display Colors Approx. 16.7 million maximum Sync Frequency Maximum Resolution 1680 × 1050, 1.8 MegaPixels Input Connector Input Sync Signal Plug & PlayVESA DDC2B TM 38W Typical, Power management mode: 2W maximum* Power Consumption Dimensions / Net Weight439.0 × 365.0 × 190.0mm / 17.3 × 14.4 × 7.5 (W×H×D), 3.7kg / 8.2lbs Up: 20 degrees, Down: 5 degrees Viewable angle Right / Left: 85 degrees each Up / Down: 80 degrees each Maximum Screen Size 408.24mm W × 255.15mm H / 16.1 W × 10.0 H Power Source100-240VAC, 50/60Hz, 1.5A Environmental Considerations Approvals Tilt Angle * Condition: Audio equipment is not connected. NOTE Brightness Contrast ratio300cd/m2 (Typical) Static 1000:1 (Typical), DCR function available Input Video Signal Input Audio Signal 1.0Vrms maximum Speakers1.0W × 2 (Stereo speakers) Input Audio Connector ø 3.5mm mini jack (Stereo) Operating: Temperature Humidity Storage: Temperature-20 to 60°C / -4 to 140°F Humidity5 to 35°C / 41 to 95°F 10 to 80% (No condensation) 5 to 85% (No condensation) Separate sync: TTL, Positive or Negative D-Sub mini 15pin Analog: 0.7Vp-p (Standard), 75Ω, Positive Analog: Horizontal 31.0-80.0kHz, Vertical 55-75Hz CE, TÜV-GS, TÜV-Ergonomics APPENDIX 22 APPENDIX
ENGLISH DIMENSIONS 439.0mm/17.3 410.0mm/16.1 257.0mm/10.1304.0mm/12.0 59.0mm/2.3 365.0mm/14.4190.0mm/7.5 APPENDIX 23 640 × 480 832 × 624 1024 × 768 COMPLIANT TIMING Dot Clock 25.175MHz 31.500MHz 31.500MHz 36.000MHz 40.000MHz 49.500MHz 50.000MHz 65.000MHz 75.000MHz 78.750MHz 108.000MHz 135.000MHz 106.500MHz 136.750MHz 146.250MHz 30.240MHz 57.283MHz 80.000MHz Vertical Frequency 59.940Hz 75.000Hz 72.809Hz 56.250Hz 60.317Hz 75.000Hz 72.188Hz 60.004Hz 70.069Hz 75.029Hz 60.020Hz 75.025Hz 59.887Hz 74.984Hz 60.000Hz 66.667Hz 74.500Hz 74.720Hz VESA MacintoshSVGA VGA XGA 1024 × 768640 × 480 800 × 600Horizontal Frequency 31.469kHz 37.500kHz 37.861kHz 35.156kHz 37.879kHz 46.875kHz 48.077kHz 48.363kHz 56.476kHz 60.023kHz 63.981kHz 79.976kHz 55.935kHz 70.635kHz 65.290kHz 35.000kHz 49.725kHz 60.150kHz Video Mode SXGA 1280 × 1024 WXGA+1440 × 900 WSXGA+1680 × 1050 M041A01