Iiyama Prolite E2201w User Manual

							USER MANUAL
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes to
read carefully through this brief but
comprehensive manual before installing and
switching on the monitor. Please keep this
manual in a safe place for your future
reference.
ENGLISHENGLISH
DEUTSCH
FRANCAIS
NEDERLANDS
 
						

							ENGLISH
Congratulations!
The display you have just purchased carries the TCO’03 Displays
label. This means that your display is designed, manufactured
and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a high
performance product, designed with the user in focus that also
minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
• Good visual ergonomics and image quality in order to improve the working environment for the
user and to reduce sight and strain problems. Important parameters are luminance, contrast,
resolution, reflectance, colour rendition and image stability.
Energy
• Energy-saving mode after a certain time – beneficial both for the user and the environment
• Electrical safety
Emissions
• Electromagnetic fields
• Noise emissions
Ecology
• The product must be prepared for recycling and the manufacturer must have a certified
environmental management system such as EMAS or ISO 14 001
• Restrictions on
o chlorinated and brominated flame retardants and polymers
o heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Development in cooperation
with scientists, experts, users as well as manufacturers all over the world. Since the end of the
1980s TCO has been involved in influencing the development of IT equipment in a more user-
friendly direction. Our labelling system started with displays in 1992 and is now requested by users
and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
 
						

							ENGLISH
FCC DECLARATION OF CONFORMITY
Model Number:PL2201W / PL2202W
Trade Name:iiyama
Responsible party:Ampronix Inc.
Address:8697 Research Dr. Irvine, CA.92618 U.S.A.
Telephone number:949-788-9930
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for Class B Personal Computers and
peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the device is operated in a residential environment. This device generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If you determine the device does cause harmful interference to radio
or television reception (this may be determined by monitoring the interference while turning the device off and
on), you are encouraged to try to correct the interference by one of the following measures:
„Reorient or relocate the receiving antenna.
„Increase the separation between the device and receiver.
„Connect the device into an outlet on a circuit different from that to which the receiver
is connected.
„Consult the dealer or an experienced radio or TV technician for help.
To meet the FCC requirements, you should use a signal cable with ferrite core at both ends.
CAUTIONChanges or modifications not expressly approved by iiyama could void the users authority
to operate the device under FCC compliance regulations.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/
EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas,
business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
All places of operation are characterised by their connection to the public low voltage power supply system.
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as
set out in the radio interference regulation of the Canadian department of communications.
CANADIAN DEPARTMENT OF COMMUNICATIONS  COMPLIANCE
STATEMENT
„We reserve the right to change specifications without notice.
„All trademarks used in this user manual are the property of their respective owners.
„As an E
NERGY STA R® Partner, iiyama has determined that this product meets the ENERGY STA R® guidelines for
energy efficiency.
 
						

							ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY..................................................................................... 1
SAFETY PRECAUTIONS........................................................................ 1
SPECIAL NOTES ON LCD MONITORS.................................................... 3
CUSTOMER SERVICE............................................................................. 3
CLEANING .............................................................................................. 3
BEFORE YOU OPERATE THE MONITOR....................................................... 4
FEATURES . . . ........................................................................................... 4
CHECKING THE CONTENTS OF THE PACKAGE.................................... 5
FITTING AND  REMOVAL  OF BASE : ProLite E2201W........................... 6
FITTING AND REMOVAL OF BASE : ProLite E2202WS / E2202WSV ... 6
CONTROLS AND  CONNECTORS  :  ProLite  E2201W.............................. 7
CONTROLS AND  CONNECTORS : ProLite E2202WS / E2202WSV...... 8
CONNECTING YOUR MONITOR : ProLite E2201W................................. 9
CONNECTING YOUR MONITOR : ProLite E2202WS / E2202WSV........ 10
COMPUTER SETTING.............................................................................. 11
ADJUSTING THE VIEWING ANGLE........................................................ 11
OPERATING THE MONITOR.......................................................................... 12
ADJUSTMENT MENU CONTENTS........................................................... 13
SCREEN ADJUSTMENTS........................................................................ 21
POWER MANAGEMENT FEATURE......................................................... 24
TROUBLE SHOOTING................................................................................... 25
APPENDIX..................................................................................................... 27
SPECIFICATIONS : ProLite E2201W....................................................... 27
SPECIFICATIONS : ProLite E2202WS..................................................... 28
SPECIFICATIONS : ProLite E2202WSV.................................................. 29
DIMENSIONS : ProLite E2201W.............................................................. 30
DIMENSIONS : ProLite E2202WS / E2202WSV ....................................... 30
COMPLIANT TIMING................................................................................ 31
CONNECTOR PIN ASSIGNMENT............................................................. 32
We recommend recycling of used product. Please contact your dealer or
iiyama service center. Recycle information is obtained via the Internet, using
the address:http://www.iiyama.com
You can access the Web page of different countries from there.
For disposal or recycling information, please contact your local authorities or the
Electronic Industries Alliance (www.eiae.org).
This information is only for U.S.A..
Hg
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS.
 
						

							ENGLISH
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor
and contact your dealer or iiyama service center immediately. Further use may be dangerous and
can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will
cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
    FOR YOUR SAFETY     1
 
						

							ENGLISH
2     FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not pull
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet
will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid
accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself
as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage
your computer.
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS
(For ProLite E2202WS / E2202WSV)
Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field
produced by the speakers if the disks are placed on or near the speakers.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For
optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
OTHERS
 
						

							ENGLISH
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTEWhen you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture
position to the correct position. „
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In
this case, the screen is recovered slowly by changing the image or turning off the
Power Switch for hours. „You may find slightly uneven brightness on the screen depending on the desktop
pattern you use. „
SPECIAL NOTES ON LCD MONITORS
Contact your dealer or iiyama service center for the backlight replacement when the
screen is dark, flickering or not lighting up. Never attempt to replace it by yourself. „Due to the nature of the backlight, the screen may flicker during initial use. Turn off
the Power Switch and then turn it on again to make sure the flicker disappears. „
NOTEThe fluorescent light used in the LCD monitor may have to be periodically replaced.
For the warranty coverage on this component, please check with local iiyama
service center.
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging. „
„
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center. „
CAUTION
For safety reasons, turn off the power switch and unplug the monitor before you
clean it. „
NOTETo protect the LCD panel, do not scratch or rub the screen with a hard object.
„
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen. „
Thinner
Benzine
Abrasive cleanerSpray-type cleaner
Wax
Acid or Alkaline solvent
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet. „
CABINETStains can be removed with a cloth lightly moistened with a mild detergent solvent. Then
wipe the cabinet with a soft dry cloth.
LCD
SCREENPeriodic cleaning with a soft dry cloth is recommended.
Dont use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
    FOR YOUR SAFETY     3
 
						

							ENGLISH
4     BEFORE YOU OPERATE THE MONITOR
BEFORE YOU OPERATE THE MONITOR
FEATURES
‹ ‹‹ ‹
‹ProLite E2201W : 56cm (22) TFT Color LCD Monitor
‹ ‹‹ ‹
‹ProLite E2202WS / E2202WSV : 55cm (22) TFT Color LCD Monitor
‹ ‹‹ ‹
‹Supports Resolutions up to 1680 × 1050
‹ ‹‹ ‹
‹High Contrast 2000:1(DCR) / High Brightness 300cd/m
2 / Quick Response Time
2ms (Gray to Gray): ProLite E2201W
‹ ‹‹ ‹
‹High Contrast 2000:1(DCR) / High Brightness 300cd/m
2 : ProLite E2202WS /
E2202WSV
‹ ‹‹ ‹
‹Multi-Color Control
Supports sRGB International Standard
‹ ‹‹ ‹
‹Gamma Control
Clear Display for Moving Pictures & Photographs
‹ ‹‹ ‹
‹Digital Character Smoothing
‹ ‹‹ ‹
‹Automatic Set-up
‹ ‹‹ ‹
‹Stereo Speakers: ProLite E2202WS / E2202WSV
2 × 2W Stereo Speakers
‹ ‹‹ ‹
‹Economy Mode
Reduced Power Consumption
‹ ‹‹ ‹
‹Plug & Play VESA DDC2B Compliant
Windows
® 95/98/2000/Me/XP/Vista Compliant
‹ ‹‹ ‹
‹DDC/CI Compliant
Screen adjustments can be made from your computer by using the compliant
software (softOSM).
‹ ‹‹ ‹
‹Power Management (E
NERGY STA R® and VESA DPMS Compliant)
‹ ‹‹ ‹
‹Ergonomic Design
TCO ’03 and TÜV-Ergonomics Approved
‹ ‹‹ ‹
‹Digital Input (DVI-D, HDCP Compliant) for Clear Display : ProLite E2201W / E2202WS
‹ ‹‹ ‹
‹VESA Mounting Standard (100mm×100mm) Compliant
 
						

							ENGLISH
CAUTION
*1The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used.
However, all guarantees and warranties are void for any problems or damage
caused by a power cable not supplied by iiyama. „ Power Cable*
1„ D-Sub Signal Cable
„ DVI-D Signal Cable*
2„ Audio  Cable*3
„ Stand„ Cable Holder
„ User Manual The following accessories are included in your package. Check to see if they are enclosed with the
monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama
office.
CHECKING THE CONTENTS OF THE PACKAGE
*2Accessory for ProLite E2201W / ProLite E2202WS
*
3Accessory for ProLite E2202WS / ProLite E2202WSV
BEFORE YOU OPERATE THE MONITOR     5

The Desktop softOSM software complies with the DDC/CI standard and can be downloaded from the
iiyama website.
www.iiyama.com
softOSM Software Functions
„Easy access to the range of user adjustments can be via the softOSM Software rather than the
buttons located on the display itself.
„The communication between software and display occurs through the Display Cable provided;
hence no special cabling is required.
Compatible with Windows 98, 2000, XP and Vista.
 
						

							ENGLISH
6     BEFORE YOU OPERATE THE MONITOR
FITTING AND REMOVAL OF BASE : ProLite E2202WS / E2202WSV
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped. „CAUTION
Do not give a strong impact to the monitor. It may cause damage.
„
Unplug the monitor before installation to avoid electric shock or damage.
„

Hold the monitor and push the post down
into the stand.Press the stopper at the back of the stand
and remove the stand from the post.
Stand
Press the stopper
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped. „CAUTION
Do not give a strong impact to the monitor. It may cause damage.
„
Unplug the monitor before installation to avoid electric shock or damage.
„

Hold the monitor and push the post down
into the stand.
Press the stopper at the back of the stand
and remove the stand from the post.
Stand
Press the stopper
FITTING AND REMOVAL OF BASE : ProLite E2201W