Iiyama Prolite E2207ws 2 User Manual

							DEUTSCH
FRANÇAIS
  ENGLISH
USER MANUAL
Thank you very much for choosing the iiyama
LCD  monitor.
We recommend that you take a few minutes to
read  carefully  through  this  brief  but
comprehensive  manual  before  installing  and
switching  on  the  monitor .  Please  keep  this
manual  in  a  safe  place  for  your  future
reference.NEDERLAND
POLSKI
 
						

							| Servicecard
Dear user, we congratulate youon the purchase of your iiyama LCD.
iiyama 
All iiyama LCD monitors comply with the ISO13406-2 standard for pixel de\
fects. 
For details on warranty and locally used pixel policies that apply direc\
tly after installation of your product 
please check the iiyama website.
In case of a defect, please call your local support hotline.
Before reporting the screen defect, please 
prepare the following information/evidence:
| model number *
| purchase receipt and serial number *
| shor t description of the defect
Important 
Note:
If there is no fault found in the collected 
equipment after inspection,
the transferring par ty shall incur charges 
for transpor t and administration. 
* see the identification plate on the back of the case.
Things to check before you call the iiyama information line 
If you have checked all of the above and there is still no picture, call our information line for assistance in your country.  | if the power cable is connected securely and turned on?
| if the display has been turned on?
| if the signal cable is connected securely and the correct input selected\
?
| if the computer has been restarted with the display connected?
| if the graphics card is correctly installed with the latest drivers poss\
ible?
| if the correct native resolution has been selected via Display Properti\
es? | If the R/G/B signal configuration is correct?
| if the displays On Screen Menu is shown?
| if the correct brightness and contrast settings have been set?
| if given display tolerances and compatibility have been considered?
| if via the On Screen Menu you have performed 
  a Factory Reset/Recall?
www.iiyama.com
Austria 
+49 1805 44 92 62 
Belgium  +31 30 240 80 20
Bulgaria  0 2 9880300
Czech Republik  220 121 432
Denmark  0 96 360 374
Estonia  0 6671796
Finland   0 9 56186130
France   0 825 828 936
Germany   0 1805 44 92 62
Great Britain  0 870 224 95 95 
Greece  0 210 289 2000
Hungary   06 1 814 8080; 06 1 340 9951
Italy   +49 1805 44 92 62Latvia  0 7408838
Lithuania  0 37 328442;  0 52 2101160 
Norway  +45 96 360 374
Poland   0 801 449262
Portugal  800 834 196 
Romania  0 21 210 38 09 33
Russia, Kaliningrad   0 4012631061
Slovak Republik   0 244 648 151
Spain  902 014 909
Sweden  0 13 20 14 20
The Netherlands   0 900-6664867
Ukraine  0 44 458 38 70
Country   Phone Number Country  Phone Number
 
						

							ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This  LCD  monitor  complies  with  the  requirements  of  the  EC  Directive    2004/108/EC  “EMC  Directive”  and 
2006/95/EC “Low Voltage Directive”.The electro-magnetic susceptibility has been chosen at a level that gives 
correct operation in residential areas,business and light industrial premises and small-scale enterprises, inside 
as well as outside of the buildings.All places of operation are characterised by their connection to the public 
low voltage power supply system.
	 We	reserve	the	right	to	change	specifications	without	notice.
 All trademarks used in this user manual are the property of their respec\
tive owners.
   As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for energy 
efficiency.
You can access the Web page of different countries from there.
We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle 
information is obtained via the Internet, using the address:http://www.iiyama.com
 
						

							ENGLISH
FOR YOUR SAFETY ........................................................................\
......  1
  SAFETY PRECAUTIONS  ................................................................  1
  SPECIAL NOTES ON LCD MONITORS  .......................................... 3
  CUSTOMER SERVICE  ....................................................................  3
  CLEANING  .......................................................................................  3
BEFORE YOU OPERATE THE MONITOR  ............................................ 4
  CHECKING THE CONTENTS OF THE PACKAGE  ......................... 4
  HOW TO USE THE STAND  .............................................................  5
  CONTROLS AND CONNECTORS  .................................................. 6
  CONNECTING YOUR MONITOR  .................................................... 7
  COMPUTER SETTING  ....................................................................  8
  ADJUSTING THE VIEWING ANGLE  ............................................... 8
OPERATING THE MONITOR  .................................................................  9
  ADJUSTMENT MENU CONTENTS  ................................................. 
10 
  SCREEN ADJUSTMENTS  ...............................................................  
14
  POWER MANAGEMENT FEATURE  ............................................... 
17
TROUBLE SHOOTING  ........................................................................\
..  
18
APPENDIX   ........................................................................\
....................  
20
  SPECIFICATIONS:ProLite E2207WS-B2   ....................................... 
20
  DIMENSIONS   .................................................................................  
21
  COMPLIANT TIMING  .......................................................................  
21
 
TABLE OF CONTENTS
 
						

							ENGLISH
    FOR YOUR SAFETY    1     
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor 
and contact your dealer or iiyama service center immediately. Further use may be dangerous and can 
cause	fire	or	electric	shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of 
fire	or	electric	shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug 
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any 
object	inside	may	cause	fire,	electric	shock	or	damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do	 not	 use	 where	 water	may	be	splashed	 or	spilt	 onto	 the	monitor	 as	it	may	 cause	 fire	or	electric	
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be	 sure	 to	operate	 the	monitor	 only	with	the	specified	 power	supply.	 Use	of	an	 incorrect	 voltage	will	
cause	malfunction	and	may	cause	fire	or	electric	shock.
PROTECT THE CABLES
Do  not  pull  or  bend  the  power  cable  and  signal  cable.  Do  not  place  the  monitor  or  any  other  heavy 
objects	on	the	cables.	If	damaged,	the	cables	may	cause	fire	or	electric	shock.
ADVERSE WEATHER CONDITIONS
It  is  advisable  not  to  operate  the  monitor  during  a  heavy  thunder  storm  as  the  continual  breaks  in 
power  may  cause  malfunction.  It  is  also  advised  not  to  touch  the  plug  in  these  circumstances  as  it 
may cause electric shock.
SAFETY PRECAUTIONS
 
						

							ENGLISH
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky 
areas	 as	it	may	 cause	 fire,	electric	 shock	or	damage.	 You	should	 also	avoid	 areas	 where	 the	sun	
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not 
place any heavy objects on the monitor, and that all cables are routed such that children may not pull 
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation	 slots	are	provided	 to	keep	 the	monitor	 from	overheating.	 Covering	the	slots	 may	cause	 fire.	
To allow adequate air circulation, place the monitor at least 10 cm (or \
4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet 
will	 be	blocked	 and	the	monitor	 may	overheat	 if	the	 stand	 is	removed.	 This	may	cause	 fire	or	damage.	
Operating  the  monitor  on  its  back,  side,  upside  down  or  on  a  carpet  or  any  other  soft  material  may 
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable 
is	disconnected.	If	you	do	not	disconnect	them,	it	may	cause	fire	or	electric	shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid 
accidents. 
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself 
as	this	may	cause	fire	or	electric	shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage 
your computer.
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS
Magnetically	 recorded	data,	such	as	on	 a	floppy	 disk,	may	become	 corrupted	 by	the	 magnetic	 field	
produced by the speakers if the disks are placed on or near the speakers\
.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. 
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) 
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour 
is recommended as looking at the screen continuously can cause eye strai\
n.
OTHERS
2     FOR YOUR SAFETY     
 
						

							ENGLISH
     FOR YOUR SAFETY      3
The following symptoms are normal with LCD monitors and do not indicate \
a problem.
NOTEWhen	
you	first	turn	 on	the	 LCD	 monitor,	 the	picture	 may	not	fit	in	the	 display	 area	
because of the type of computer that is used. In this case, adjust the picture position 
to the correct position.

Due  to  the  nature  of  the  LCD  screen,  an  afterimage  of  the  previous  screen  may 
remain  after  switching  the  image,  when  the  same  image  is  displayed  for  hours.  In 
this  case,  the  screen  is  recovered  slowly  by  changing  the  image  or  turning  off  the 
Power Switch for hours.

You	
may	 find	slightly	 uneven	 brightness	 on	the	 screen	 depending	 on	the	 desktop	
pattern you use.

SPECIAL NOTES ON LCD MONITORS
Contact your dealer or iiyama service center for the backlight replacement when the 
screen	is	dark,	flickering	or	not	lighting	up.	Never	attempt	to	replace	it	by	yourself.
 Due	
to	the	 nature	 of	the	 backlight,	 the	screen	 may	flicker	 during	 initial	use.	Turn	 off	
the	Power	Switch	and	then	turn	it	on	again	to	make	sure	the	flicker	disappears.

NOTEThe	
fluorescent	 light	used	 in	the	 LCD	 monitor	 may	have	 to	be	 periodically	 replaced.	
For the warranty coverage on this component, please check with local iiyama service 
center.
If you have to return your unit for service and the original packaging has been discarded, 
please  contact  your  dealer  or  iiyama  service  center  for  advice  or  replacement 
packaging.


WARNING
If you drop any materials or liquids such as water into the monitor when cleaning, unplug 
the power cable immediately and contact your dealer or iiyama service ce\
nter.

CAUTION
For  safety  reasons,  turn  off  the  power  switch  and  unplug  the  monitor  before  you 
clean it.

NOTE
To protect the LCD panel, do not scratch or rub the screen with a hard ob\
ject.

Never use any of the following strong solvents. These will damage the cabinet and 
the LCD screen.

Thinner
Benzine
Abrasive cleaner Spray-type cleaner
Wax
Acid or Alkaline solvent
Touching the cabinet with any product made from rubber or plastic for a long time may 
cause degeneration or loss of paint on the cabinet.

CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then 
wipe the cabinet with a soft dry cloth. 
LCD
SCREEN Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
 
						

							ENGLISH
The following accessories are included in your package. Check to see if they are enclosed with the 
monitor. If anything is missing or damaged, please contact your local  iiyama dealer or regional iiyama 
office.
BEFORE YOU OPERATE THE MONITOR
CHEKING THE CONTENTS OF THE PACKAGE
FEATURES
4      BEFORE YOU OPERATE THE MONITOR    
*1 The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using  
  a power supply higher than this rating, then a power cable with a rating of 10A/  
    250V must be used.However, all guarantees and warranties are void for any    
    problems or damage caused by a power cable not supplied by iiyama.
 Power Cable*1
	  VGA Cable         Audio Cable
 User  Manual   DVI-D Signal Cable                      Stand		                                  CAUTION
 56cm (22") TFT Color LCD Monitor
  Supports Resolutions up to 1680 × 1050
  High Contrast 1000:1 , ACR Function Available / High Brightness 300cd/m
2 /  
Quick Response Time 2ms(Gray to Gray)
  Stereo Speakers
  2 × 2W Stereo Speakers
  Digital Input (DVI-D) for Clear Display
	 Plug & Play VESA DDC1/2B
TM Compliant
  Windows® 95/98/2000/Me/XP/Vista Compliant
  Power Management (E
NERGY STAR® VESA DPMS Compliant)
  VESA Mounting Standard (100mm x 100mm) Compliant
 
						

							ENGLISH
     BEFORE YOU OPERATE THE MONITOR     5
HOW TO USE THE STAND
Install the Stand on a stable surface. The monitor may cause injury or damage if 
it falls or is dropped.

  Do not give a strong impact to the monitor. It may cause damage.

Unplug the monitor before installation to avoid electric shock or damage\
.

The  monitor  is  shipped  with  the  stand  detached.  Be  sure  to  attach  the  stand  before  operating  the 
display and remove if it is necessary to re-box.
HOW TO USE THE STAND
CAUTION
1. Lay	the	monitor	flat	on	a	table	with	front	face	down	(see	Fig	1).	Put	a	piece	of	soft	cloth	on	the			
    table beforehand to prevent the monitor from being scratched.
2. Unpack the stand and mount it onto the monitor base with aligning it to \
the hook (see Fig 2).
3. Slide	the	stand	upward	until	it	makes	a	click	sound,	indicating	it	is	fixed	(see	Fig	3).
4. Stand the monitor up (see Fig 4).
(Fig 4)
(Fig 1) 
(Fig 2)
(Fig 3)
 Power Cable*1 	  VGA Cable         Audio Cable
 User  Manual   DVI-D Signal Cable                      Stand		                                  
 
						

							ENGLISH
  FRONT PANEL CONTROL
 Menu Button (     )      
  Scroll  Down / Brightness/Contrast/ACR/ECO Mode shortcut keys(
) 
  Scroll Up / OptiColor Mode (
)*2
  Select /  Input select (     )*3
  Power Indicator 
    Blue: Normal operation
    Orange: Power Management
      The  monitor  enters  into  power  management  mode  which  reduces  the  power   
    consumption to less than 2W when receiving no horizontal and/or vertical   
    sync signal.  
   Power Switch (     ) 
  AC Connector (Power IN)   
  Audio Connector(AUDIO IN)  
	 DVI-D 24pin Connector (DVI) 
   D-SUB mini 15pin Connector (VGA)                       
     Keyhole for Security Lock  *1
         Speakers
CONTROLS AND CONNECTORS
*1  You can fasten a security lock and cable to prevent the monitor from bein\
g removed    
     without your permission.NOTE
6       BEFORE YOU OPERATE THE MONITOR    
 
NOTE
11


          12
1
2
12
11
*2 OptiColor Mode: Press the  Button when the Menu is not displayed.
*3 Input Select shortcut keys is available when the Menu is not displaye\
d.