Iiyama Prolite H511s User Manual

							ENGLISH
FEATURES

						

							ENGLISH
Optional parts as below are available for your LCD monitor. Please contact your local iiyama dealer
or regional iiyama office for more details. The Protection Sheet may be attached to the LCD panel
surface to protect it from stains or scratches.

						

							ENGLISHAPower Switch / Power Indicator (POWER)
Green:Normal operation (ProLite H511S)
Blue:Normal operation (ProLite H511S-B)
Orange:Power Management
The monitor enters into power management mode which reduces the power
consumption to less than 5W when receiving no horizontal and/or vertical
sync signal.
BAuto Button (AUTO)
       See page 13 for Auto Set-up.
CExit / Volume Button (EXIT /      )
D+ / Brightness Button ( + /     )
E– / Contrast Button ( – /     )
FMenu Button (MENU)
GInput Button (INPUT)
       Select either Analog or Digital for the signal input when both of the signal inputs are connected to a signal
source. Switch D-SUB and DVI-D whenever pressing the input button.
When only one of the two signal inputs is connected to the signal source, the one connected
is automatically selected. Input Button is not available if there is no signal input from the
selected connector or during the power management mode.
HHeadphone Connector
ISpeakers
JAC Connector (AC IN)
KMain Power Switch
LAudio Connector (LINE IN)
MDVI-D 24pin Connector (DVI-D)
ND-sub mini 15pin Connector (D-SUB)
OKeyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
BEFORE YOU OPERATE THE MONITOR      7
CONTROLS AND CONNECTORS
 
NOTE
NOTE
NOTE
 
						

							ENGLISH
Power Cable
(Accessory)
Audio Cable (Accessory)
Computer D-Sub Signal Cable
(Accessory)
DVI-D Signal Cable
CONNECTING YOUR MONITOR
[Example of Connection] AEnsure that both the computer and the monitor are switched off.
BConnect the computer to the monitor with the signal cable. (See page 27 for CONNECTOR PIN
ASSIGNMENT.)
CConnect the monitor to the audio equipment with the Audio Cable when using the audio features.
DConnect the Power Cable to the monitor first and then to the power supply.
NOTE
						

							ENGLISH
   BEFORE YOU OPERATE THE MONITOR      9
COMPUTER SETTING

						

							ENGLISH
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE

						

							ENGLISH
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 26. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 19 for SCREEN ADJUSTMENTS.
( (( (
(Press the Menu Button to start the On Screen Display feature. There are
additional Menu pages which can be switched by using the +/– Buttons.
B BB B
BSelect the Menu page which contains the adjustment icon relating to the
adjustment you want to make. Press the Menu Button again. Then, use the
+/– Buttons to highlight the desired adjustment icon. Press the Menu Button
again.
The On Screen Display disappears several seconds after you stop pressing the buttons while
performing an adjustment. The Exit Button can be used to exit OSD window immediately. 
						

							ENGLISH
12       OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option                       Button to Press
Too dark
Too brightBrightness *1
ContrastToo dull
Too intense
To correct flickering text or linesClock *2
Phase *2
H-PositionToo far to the left
Too far to the right
V-PositionToo low
Too high
Return to MenuHighlight “Menu : 1” again.
You can skip the Menu pages and display an adjustment scale directly by using the
following button operations.
zBrightness:Press the Brightness Button when the Menu is not displayed.
zContrast:Press the Contrast Button when the Menu is not displayed.
To correct flickering text or lines
Direct
Direct
Direct
*1Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
*
2See page 19 for SCREEN ADJUSTMENTS.
Menu : 1
(Analog) Analog Input
H: 74.35 KHz  V: 59.48 Hz1600 × 1200
Menu:1
 
						

							ENGLISH
Menu : 2
(Analog)
On
Problem / Option                                                  Button to Press Adjustment Item
Color Temp.
Bluish white
Sharpness1 2 3 4 5
Adjust the picture quality at resolutions of less than 1600× 1200.
You can change the picture quality from 1 to 5 (sharp to soft).
Press the + Button to change the picture quality in numerical
order. Press the – Button to change the picture quality in reverse
numerical order.
Auto Set-up *3NO
YESReturn to Menu.
Adjust Clock, Phase, V-Position and H-Position
automatically.
Direct
*3For best results, use the Auto Set-up in conjunction with the adjustment pattern. See page 19 for
SCREEN ADJUSTMENTS.
Direct
z  Auto Set-up:  Press the Auto Button when the Menu is not displayed.
Cold
NOTE
						

							ENGLISH
14      OPERATING THE MONITOR
Menu : 2
(Analog)
Return to MenuHighlight “Menu : 2” again.
Off
Mode1High contrast
Dark
Gamma
Mode1Brightness of back-light is reduced.
Mode2Brightness of back-light is reduced more than Mode1.
Economy ModeOffNormal
Mode2
Direct
Problem / Option Adjustment Item
z  Economy Mode: When OSD menu is off, holding the Menu button for 1-2 seconds will toggle the
Economy Mode switch Off, Mode1 and Mode2.
NOTE