Incredible Technologies Skins Game Template Universal Conv Kit Service Manual

							TEMPLATE AMENDMENT    16-11146 
See other side for Golden Tee information. 
UNIVERSAL CONVERSION KIT 
The assembly illustration (Setup-7) for the Skins Game Universal Conversion Kit 
should be amended in the following way. When converting a standard cabinet, 
note that the cutout in the plastic overlay should be rectangular and not circular. 
TYPICAL GAME CONVERSION  
						

							TEMPLATE AMENDMENT    16-11146 
Golden Tee Golf is a trademark of Incredible Technologies, Inc.         See other side for typical conversion.
  
When converting a Golden Tee™ video game into a Skins Game, please observe the 
following change to control panel/overlay modification (Setup-7) 
1. 
Remove plastic overlay. Remove long bolts that hold metal plate to control panel. 
2. 
Remove artwork and metal plate through top of control panel. 
3. 
Remove trackball from bottom of control panel. Disconnect wires and ground strap. 
4. 
If desired, fill round holes in control panel, sand smooth and paint black. 
5. 
Seat joystick mounting plate (04-12875) into recess on top of wood control panel. 
6. 
Remove backing from wallpaper decal (31-3488) and place over control panel and 
joystick mounting plate. Trim to fit. 
7. 
Place plastic control panel cover (03-9664) on top of wallpaper. Drill holes and 
fasten cover to wallpaper using existing hardware. Trim cover to fit wood panel. 
8. 
Tape template to plastic cover, aligning center joystick hole with mounting plate 
hole. Cut round holes through plastic, wallpaper, and wood. Deburr holes. Do not 
cut rectangular hole. 
9. 
Remove backing from joystick decal (31-3490) and button decals (31-3489) and 
place between wallpaper and plastic cover, according to illustration. 
10. 
Continue with conversion according to manual. 
 
GOLDEN TEE CONVERSION