Indesit Biaa 33 F X Operating Instructions

							Register your
appliance now on08448 24 24 24
Contents
Operating Instructions, 1
Assistance, 2
Description of the appliance, 3
Reversible doors, 4
Installation, 5
Start-up and use, 6
Maintenance and care, 8
Precautions and tips, 8
Troubleshooting, 9
 English
Operating Instructions
REFRIGERATOR/FREEZER COMBINATION BIAA 1x F xx WD
BIAAA 1x F xx WD
  
						

							2
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PART\
S GUARANTEE ON 08448 24 24 24
After Sales ServiceNo one is better placed to care for your Indesit appliance during 
the course of its working life than us – the manufacturer.
Essential Contact Information
Indesit ServiceWe are the largest service team in the UK and Ireland offering you 
access to 400 skilled telephone advisors and 1000 fully qualified 
engineers on call to ensure you receive fast, reliable, local service.
UK: 08448 224 224
Republic of Ireland: 0818 313 413 www.indesitservice.co.uk
Please note: Our advisors will require the following information:
Model number:  _____________________________________
Serial number:  _____________________________________
Parts and AccessoriesWe supply a full range of genuine replacement parts as well as 
accessory products that protect and hygienically clean your 
appliance to keep it looking good and functioning efficiently 
throughout its life.
UK: 08448 225 225
Republic of Ireland: 0818 313 413 www.indesitservice.co.uk 
Appliance Registration
We want to give you additional benefits of Indesit ownership. To 
activate your free 5 year parts guarantee you must register your 
appliance with us.
UK: 08448 24 24 24
Republic of Ireland: 01 230 0233 www.indesitservice.co.uk
Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB
Indesit Company Unit 49 Airways Industrial Estate, Dublin 17
Recycling and Disposal InformationAs part of Indesit’s continued commitment to helping the 
environment, Indesit reserves the right to use quality, recycled 
components to keep down customer costs and minimise material 
wastage.
Assistance
Guarantee
12 months Parts and Labour GuaranteeYour appliance has the benefit of our manufacturer’s guarantee, 
which covers the cost of breakdown repairs for twelve months 
from the date of purchase.
This gives you the reassurance that if, within that time, your 
appliance is proven to be defective because of either workmanship 
or materials, we will, at our discretion, either repair or replace the 
appliance at no cost to you.
This guarantee is subject to the following conditions:
-  The appliance has been installed and operated correctly and in 
accordance with our operating and maintenance instructions.
-   The appliance is used only on the electricity or gas supply 
printed on the rating plate.
-  The appliance has been used for normal domestic purposes 
only.
-   The appliance has not been altered, serviced, maintained, 
dismantled, or otherwise interfered with by any person not 
authorised by us.
-   Any repair work must be undertaken by us or our appointed 
agent.
-  Any parts removed during repair work or any appliance that is 
replaced become our property.
-  The appliance is used in the United Kingdom or Republic of 
Ireland.
The guarantee does not cover:
-  Damage resulting from transportation, improper use, neglect 
or interference or as a result of improper installation.
-   Replacement of any consumable item or accessory. These 
included but not limited to: plugs, cables, batteries, light bulbs, 
fluorescent tubes and starters, covers and filters.
-  Replacement of any removable parts made of glass or plastic.
THIS GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS 
BEEN USED IN COMMERCIAL OR NON-DOMESTIC PREMISES.
5 Year Parts GuaranteeIndesit also offers you a free 5 year parts guarantee. This additional 
guarantee is conditional on you registering your appliance with 
us and the parts being fitted by one of our authorised engineers. 
There will be a charge for our engineer’s time. To activate the extra\
 
parts warranty on your appliance, simply call our registration line 
on 08448 24 24 24  (Republic of Ireland 01 230 0233).
Extended GuaranteesWe offer a selection of protection plans that enable you to fully 
cover yourself against the expense of repair bills for the life of your 
policy. To find the ideal plan for you please call our advice line on 
08448 226 226 (Republic of Ireland 01 230 0233).
Helpdesk ServiceWe have a dedicated team who can provide free advice and 
assistance with your appliance if you experience any technical 
difficulties within the first 90 days of ownership. Simply call our 
Indesit Service Hotline on 08448 224 224 (Republic of Ireland 
0818 313 413) for telephone assistance, or, where necessary, to 
arrange for an engineer to call.
 - model - serial number
  
						

							3
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PART\
S GUARANTEE ON 08448 24 24 24
Description of the appliance
Overall view
The instructions contained in this manual are applicable to 
different model refrigerators. The diagrams may not directly 
represent the appliance purchased. For more complex features, 
consult the following pages.
1 Levelling FEET
2  STORAGE compartment
3  Ice
3 Ice tray *.
4  FREEZER and STORAGE compartment*
5  FRUIT and VEGETABLE bin *
6  REFRIGERATOR OPERATION Knob
7  FRESH BOX for MEAT and CHEESE *
8  WINE RACK *
9  SHELVES *
10  LAMP (see Maintenance).
11  FREEZER OPERATION Knob
12 Removable  multipurpose  SHELVES *
13  BOTTLE shelf
14 WATER DISPENSER
* Varies by number and/or position, available only on certain 
models.
2
1
3
5
6
9
12
13
8
4
12
14
7
11
10
9
  
						

							4
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PART\
S GUARANTEE ON 08448 24 24 24
Reversible doors
* Available only on certain models.1
2
3
4
5

 3mm
*
   
						

							GB
5
Installation
! Before placing your new appliance into operation please read 
these operating instructions carefully. They contain important 
information for safe use, for installation and for care of the 
appliance.
! Please keep these operating instructions for future reference. 
Pass them on to possible new owners of the appliance.
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free room.
2.  Do not obstruct the rear fan grills. The compressor and 
condenser give off heat and require good ventilation to operate 
correctly and save energy.
3.  Leave a space of at least 10 cm between the top part of the 
appliance and any furniture above it, and at least 5 cm between 
the sides and any furniture/side walls.
4.  Ensure the appliance is away from any sources of heat (direct 
sunlight, electric stove, etc.).
5.  In order to maintain the correct distance between the appliance 
and the wall behind it, fit the spacers supplied in the installation 
kit, following the instructions provided.
Levelling
1.  Install the appliance on a level and rigid floor.
2.  If the floor is not perfectly horizontal, adjust the refrigerator by 
tightening or loosening the front feet.
Electrical connections
After the appliance has been transported, carefully place it 
vertically and wait at least 3 hours before connecting it to the 
electricity mains. Before inserting the plug into the electrical socket 
ensure the following:
•   The  appliance  is  earthed  and  the  plug  is  compliant  with  the 
law.
•   The socket can withstand the maximum power of the appliance, 
which is indicated on the data plate located on the bottom left 
side of the fridge (e.g. 150 W).
•   The voltage must be in the range between the values indicated 
on the data plate located on the bottom left side (e.g. 220-
240V).
•   The  socket  is  compatible  with  the  plug  of  the  appliance.  If 
the socket is incompatible with the plug, ask an authorised 
technician to replace it (see Assistance). Do not use extension 
cords or multiple sockets.
! Once the appliance has been installed, the power supply cable 
and the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
!  The cable must be checked regularly and replaced by authorised 
technicians only (see Assistance).
!  The manufacturer declines any liability should these safety 
measures not be observed.
Your appliance is supplied with a 13amp fused plug that can be 
plugged into a 13amp socket for immediate use.  Before using 
the appliance please read the instructions below.
WARNING: 
THIS APPLIANCE MUST BE EARTHED.
Replacing fuse covers:
When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 
1362 should always be used and the fuse cover re-fitted.
If the fuse cover is lost, the plug must not be used until a 
replacement is obtained. Replacement fuse covers:
If a replacement fuse cover is fitted, it must be of the correct 
colour as indicated by the coloured marking or the colour that is 
embossed in words on the base of the plug.
Changing the plug:
Removing the plug
If your appliance has a non-rewireable moulded plug and you 
should wish to remove it to add a longer cable or to re-route the 
mains cable through partitions, units etc. please ensure that either:
-
  The plug is replaced by a fused 13amp re-wireable plug 
bearing the BSI mark of approval.
or
-  The mains cable is wired directly into a 13amp cable outlet, 
controlled by a switch (in compliance with BS 5733) which is 
accessible without moving the appliance.
Disposing of the plug
Cut off and dispose of the supplied plug if it does not fit your socket.\
 
The cable should be cut as close as possible to the moulded plug.
Remove the fuse.
WARNING: 
To avoid a shock hazard do not insert the discarded plug 
into a socket anywhere else.
Fitting a new plug
IMPORTANT:  
WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE 
WITH THE FOLLOWING CODE...
Green and Yellow  - Earth
Blue   - Neutral
Brown   - Live
As the colours of the wires in the mains lead may not correspond 
with the coloured markings identifying the terminals in your plug, 
proceed as follows:
- Connect  Green and Yellow wire to terminal marked ‘E’ or 
 
or coloured Green and Yellow.
- Connect  Brown wire to terminal marked ‘L’ or coloured red or 
brown.
- Connect  Blue wire to terminal marked  ‘N’  or coloured Black 
or Blue.
If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse.\
  
If you are in any doubt about the electrical supply to your 
machine, consult a qualified electrician before use.
CE Marking certifies that this appliance conforms to the 
following EEC directives: 
Low Voltage Equipment - 73/23/EEC & 93/68 EEC
Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 
93/68/EEC
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PART\
S GUARANTEE ON 08448 24 24 24
   
						

							6
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PART\
S GUARANTEE ON 08448 24 24 24
Start-up and use
Starting the appliance
! Before starting the appliance, follow the installation 
instructions (see Installation).
! Before connecting the appliance, clean the compartments and 
accessories well with lukewarm water and bicarbonate.
! The appliance comes with a motor protection control system 
which makes the compressor start approximately 8 minutes 
after being switched on. The compressor also starts each time 
the power supply is cut off whether voluntarily or involuntarily 
(blackout).
1. Insert the plug into the socket and ensure that the internal light 
illuminates ( the FREEZER OPERATION knob must not be on 
the  position 
) .
2.  Turn the FREEZER OPERATION knob and REFRIGERATOR 
OPERATION knob to an average value. After a few hours you 
will be able to put food in the refrigerator.
Setting the temperature
The temperature inside the refrigerator compartment automatically 
adjusts itself according to the position of the thermostat knob.
min = warmest
max = coldest
We recommend, however, a medium position.
Chiller system 
No Frost
The No Frost system circulates cold air continuously to collect 
humidity and prevent ice and frost formation. The system maintains 
an optimal humidity level in the compartment, preserving the 
original quality of the food, preventing the food from sticking 
together and making defrosting a thing of the past. Do not block 
the aeration cells by placing food or containers in direct contact 
with the refrigerating back panel. Close bottles and wrap food 
tightly.
Using the refrigerator to its full potential
•  Place only cold or lukewarm foods in the compartment, never 
hot foods (see Precautions and tips).
•   Remember that cooked foods do not last longer than raw foods.
•  Do not store liquids in open containers: they will increase the 
level of humidity in the refrigerator and cause condensation to 
form.
SHELVES: with or without grill. 
Due to the special guides the shelves are removable and the 
height is adjustable (see diagram), allowing easy storage of large 
containers and food. Height can be adjusted without complete 
removal of the shelf.
TEMPERATURE  Indicator light*: to identify the coldest area in the 
refrigerator.
1.  Check that OK appears clearly on the indicator light (see 
diagram).
2.  If the word “OK” does not appear it means that the temperature 
is too high: adjust the REFRIGERATOR OPERATION knob to a 
higher position (colder) and wait approximately 10 hours until 
the temperature has been stabilised.
3.  Check the indicator light again: if necessary, readjust it following 
the initial process. If large quantities of food have been added 
or if the refrigerator door has been opened frequently, it is 
normal for the indicator not to show OK. Wait at least 10 hours 
before adjusting the REFRIGERATOR OPERATION knob to a 
higher setting.
FRESH BOX
*
This is the new box to keep meat, fish and cheese fresh. When 
positioned in the “lower” part of the fridge compartment, it is id\
eal 
for meat and fish; when moved to the “top” part of the fridge, it \
is perfect for cheese.
 It can be taken out of the fridge when it is 
not needed.
Operation and maintenance of the water 
dispenser.
When first used, or after prolonged periods of inactivity, wash the 
tank with water. The water dispenser supplies cold water without 
having to open the refrigerator door each time.
This also allows for reducing the product’s energy consumption. 
To fill the tank, lift the flap or remove the cover (see picture) then\
 
pour in the water with a carafe or other suitable container. Avoid 
filling the tank completely.
* Varies by number and/or position, available only on certain 
models.
   
						

							GB
7
1
7
2
45
6
4
3
5 6
8 9
Always exclusively use drinkable natural mineral water: any 
other liquid may hamper the device’s correct operation. 
To withdraw water with the refrigerator door closed, press the 
dispenser actuator with a suitable container (glass, carafe, etc.). 
Release the actuator once the desired quantity has been dispensed. 
The water tank should be cleaned regularly under running water; do 
not use detergents. To clean the tank, remove the tank cover and 
upper ledges; subsequently, remove the tank by pulling it outwards 
while pressing the appropriate button (see picture).
The tank must be replaced back into its housing as soon as 
possible so as to avoid excessive heating of the refrigerator.
1
7
24
5 6
4
3
5 6
8 9
For more thorough cleaning, it is advisable to unscrew the valve 
from the tank (see picture) and clean it under running water.
! Be careful not to pull the transparent mobile element of the valve.
1
7
2
45
6
4
3
5 6
8 9
Once cleaning operations have been completed, screw the 
valve back on while ensuring that the internal seal adheres to the 
end part of the tank bushing; subsequently, put the tank-valve 
assembly back into the appropriate cylindrical housing of the 
door, while making sure that the upper hook on the rear wall of 
the tank is properly inserted in the appropriate compartment on 
the inner wall of the door. Put the previously removed ledges and 
tank cover back in place.
! Make sure that the tank has been properly inserted in the 
door (see picture).
1
7
2 45
6
4
3
5 6
8 9
! The presence of water drops on the tank walls is a normal 
occurrence during the product’s operation.
! Dry any drops present on the outer walls of the product.
Using the freezer to its full potential
The temperature inside the freezer compartment automatically 
adjusts itself according to the position of the thermostat knob.
 = warmest
 = coldest
We recommend, however, a medium position.
ECO is the optimal temperature for energy saving levels.
 switches the appliance off, including the refrigerator.
•   Do not re-freeze food that is defrosting or that has already been 
defrosted. These foods must be cooked and eaten (within 24 
hours).
•   Fresh  food  that  needs  to  be  frozen  must  not  come  into  contact 
with food that has already been defrosted. 
•   Do not place glass bottles which contain liquids, and which are 
corked or hermetically sealed in the freezer because they could 
break.
•   The maximum quantity of food that may be frozen daily is indicated 
on the plate containing the technical properties located on the 
bottom left side of the refrigerator compartment (for example: 
Kg/24h: 4)
!  Do not open the door during freezing.
!  If there is a power cut or malfunction, do not open the freezer door. 
This will help maintain the temperature inside the freezer, ensuring 
that foods are conserved for at least 9 -14 hours.
!  To avoid blocking the air circulation inside the freezer, it is advisab\
le 
not to obstruct the ventilation holes with food or containers.
!  To maximise space inside the freezer, all drawers [with the exception 
of the bottom drawer] can be removed from their positions and the 
food placed directly on the racks/glass shelves supplied [where 
present].
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PART\
S GUARANTEE ON 08448 24 24 24
   
						

							8
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PART\
S GUARANTEE ON 08448 24 24 24
Ice3 ice tray
The fact that they are situated on the top part of the freezer drawers 
ensures greater cleanliness: the ice no longer comes into contact 
with the food placed inside the freezer compartment; furthermore, 
the dripping of the water during filling is avoided (a lid to cover up 
the hole after filling with water is also provided).
1.  Pull out the tray by pushing it up. Check that the tray is ompletely 
empty and fill it with water through the opening provided.
2.  Take care not to exceed the level indicated (MAX WATER LEVEL). 
Excess water prevents the ice cubes from dispensing (if this 
happens, wait for the ice to melt and empty the tray).
3.  Turn the tray 90°: due to the connected compartments each mould 
fills with water (see diagram).
4.  Close the opening with the lid provided and put the tray back, 
placing the top part in the corresponding housing and allowing 
it to drop in again.
5.  When the ice has formed (minimum time approximately 8 hours) 
knock the tray against a hard surface and wet the outside so that 
the ice cubes come loose and take them out through the opening.
WA TER LEVELMAX
WATER LEVELMAX
WATER LEVELMAX
Maintenance and care
Switching the appliance off
During cleaning and maintenance it is necessary to disconnect 
the appliance from the electricity supply:
1. set the FREEZER OPERATION knob on 
 
2.  pull the plug out of the socket
Cleaning the appliance
• We  recommend  you clean your fridge with our Professional 
Fridge cleaner.To order please call us on 08448 225 225 or 
visit www.indesitservice.co.uk
•   The external and internal parts, as well as the rubber seals may 
be cleaned using a sponge that has been soaked in lukewarm 
water and bicarbonate of soda or neutral soap. Do not use 
solvents, abrasive products, bleach or ammonia.
•   The removable accessories may be soaked in warm water and 
soap or dishwashing liquid. Rinse and dry them carefully.
•   The  back  of  the  appliance  may  collect  dust  which  can  be 
removed by delicately using the hose of a vacuum cleaner set 
on medium power. The appliance must be switched off and 
the plug must be pulled out before cleaning the appliance.
Avoiding mould and unpleasant odours
•   The appliance is manufactured with hygienic materials which 
are odour free. In order to maintain an odour free refrigerator 
and to prevent the formation of stains, food must always be 
covered or sealed properly.
•   If you want to switch the appliance off for an extended period 
of time, clean the inside and leave the doors open.
Replacing the light bulb
•  We  recommend  you clean your fridge with our Professional 
Fridge cleaner.To order please call us on 08448 225 225 or 
visit www.indesitservice.co.uk
To replace the light bulb in the refrigerator compartment, pull out 
the plug from the electrical socket. Follow the instructions below.
Access the light bulb by removing the cover as indicated in the 
diagram. Replace it with a similar light bulb within the power range 
indicated on the cover.
11
2
Precautions and tips
! The appliance was designed and manufactured in compliance 
with international safety standards. The following warnings are 
provided for safety reasons and must be read carefully.
This appliance complies with the following Community Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent 
amendments;
-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and 
subsequent amendments;
- 2002/96/CE.
  
 
General safety•  The appliance was designed for domestic use inside the home and 
is not intended for commercial or industrial use.
•  The  appliance  must  be  used  to  store  and  freeze  food  products  by 
adults only and according to the instructions in this manual.
•  The appliance must not be installed outdoors, even in covered areas. 
It is extremely dangerous to leave the appliance exposed to rain and 
storms.
•  Do not touch the appliance with bare feet or with wet or moist hands 
and feet.
•   Do  not  touch  the  internal  cooling  elements:  this  could  cause  skin 
abrasions or frost/freezer burns.
•  When unplugging the appliance always pull the plug from the mains 
socket, do not pull on the cable.
•  Before  cleaning  and  maintenance,  always  switch  off  the  appliance 
and disconnect it from the electrical supply. It is not sufficient to set 
the temperature adjustment knobs on 
 (appliance off) to eliminate 
all electrical contact.
•  In  the  case  of  a  malfunction,  under  no  circumstances  should  you 
attempt to repair the appliance yourself. Repairs carried out by 
inexperienced persons may cause injury or further malfunctioning of 
the appliance.
•   Do not use any sharp or pointed utensils or electrical equipment - other  
than the type recommended by the manufacturer - inside the frozen 
food storage compartments.
•  Do not put ice cubes taken directly from the freezer into your mouth.
•  This appliance is not intended for use by persons (including children) 
with reduced physical, sensory or lack of experience and knowledge 
unless they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety. Children 
should be supervised to ensure that they do not play with the appliance.
•  Keep packaging material out of the reach of children! It can become 
a choking or suffocation hazard.
   
						

							GB
9
Disposal
•  Observe  local  environmental  standards  when  disposing 
packaging material for recycling purposes.
•  The  European  Directive  2002/96/EC  on  Waste  Electrical  and 
Electronic Equipment (WEEE), requires that old household 
electrical appliances must not be disposed of in the normal 
unsorted municipal waste stream. Old appliances must be 
collected separately in order to optimise the recovery and 
recycling of the materials they contain and reduce the impact 
on human health and the environment. The crossed out 
“wheeled bin” symbol on the product reminds you of your 
obligation, that when you dispose of the appliance it must be 
separately collected. Consumers should contact their local 
authority or retailer for information concerning the correct 
disposal of their old appliance.
Respecting and conserving the 
environment
•   Install the appliance in a fresh and well-ventilated room. Ensure 
that it is protected from direct sunlight and do not place it near 
heat sources.
•   Try to avoid keeping the door open for long periods or opening 
the door too frequently in order to conserve energy.
•   Do  not  fill  the  appliance  with  too  much  food:  cold  air  must 
circulate freely for food to be preserved properly. If circulation 
is impeded, the compressor will work continuously.
•  Do not place hot food directly into the refrigerator. The internal 
temperature will increase and force the compressor to work 
harder and will consume more energy.
•  Defrost  the  appliance  if  ice  forms  (see Maintenance). A thick 
layer of ice makes cold transference to food products more 
difficult and results in increased energy consumption.
Troubleshooting
If the appliance does not work, before calling for Assistance (see 
Assistance), check for a solution from the following list.
The internal light does not illuminate.
•   The plug has not been inserted into the electrical socket, or not 
far enough to make contact, or there is no power in the house.
•  The FREEZRT OPERATION knob is in the 
 position
The motor does not start.
•   The appliance comes with a motor protection control (see Start-
up and use).
The refrigerator and the freezer do not cool well.
•  The doors do not close properly or the seals are damaged.
•  The doors are opened too frequently.
•  The TEMPERATURE ADJUSTMENT knob is not in the correct 
position.
•  The refrigerator or the freezer have been over-filled.
The food inside the refrigerator is beginning to freeze.
•  The TEMPERATURE ADJUSTMENT knob is not in the correct 
position.
The motor runs continuously.
•  The door is not closed properly or is continuously opened.
•  The outside ambient temperature is very high.
The appliance makes a lot of noise.
•  The  appliance  has  not  been  installed  on  a  level  surface  (see 
Installation).
•   The appliance has been installed between cabinets that vibrate 
and make noise. • 
The  internal  refrigerant  makes  a  slight  noise  even  when  the 
compressor is off. This is not a defect, it is normal.
Some of the external parts of the refrigerator become hot.
•  These raised temperatures are necessary in order to avoid the 
formation of condensation on certain parts of the product.
Don’t forget should our advice fail to resolve the problem with 
your appliance please call us on 08448 224 224 to arrange an 
engineer visit. Or visit  www.indesitservice.co.uk
Product failures are fully covered by your 12 months parts 
and labour guarantee. However, if we attend and there is no 
product failure or the failure has been caused by damage, 
misuse or by incorrect installation, charges will apply.
   
						

							10
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PART\
S GUARANTEE ON 08448 24 24 24