InFocus LP1200 Projector User Manual

1
ENGLISH
FRAN‚AIS
DEUTSCH
ITALIANO
ESPA„OL
USER’S
GUIDE
APPENDIX 

2
ENGLISH
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated Òdangerous voltageÓ within the
productÕs enclosure that may be of sufficient magnitude to constitute a risk of electric
shock.
The exclamation point within an...

3
ENGLISH
Contents
Important safeguards ........................................................................... 4
Overview of the projector ...................................................................... 6
Overview of the remote control ............................................................ 8
Battery installation ............................................................................................. 9
Preparing the projector for operation...

4
ENGLISH
Important safeguards
PLEASE READ ALL THESE INSTRUCTIONS RE-
GARDING YOUR LCD PROJECTOR  AND RETAIN
THEM FOR FUTURE REFERENCE. FOLLOW ALL
WARNINGS AND INSTRUCTIONS MARKED ON
THE  LCD PROJECTOR.
1. Read instructions
All the safety and operating instructions should
be read before the appliance is operated.
2. Retain instructions
The safety and operating instructions should be
retained for future reference.
3. Warnings
All warnings on the appliance and in the oper-
ating instructions should be...

5
ENGLISH
WARNING:
Unplug immediately if there is
something wrong with your projector.
Do not operate if smoke, strange noise or odor comes
out of your projector. It might cause fire or electric
shock. In this case, unplug immediately and contact
your dealer.
Never remove the cabinet.
This projector contains high voltage circuitry. An
inadvertent contact may result in an electric shock.
Except as specifically explained in the Owners
Guide, do not attempt to service this product
yourself. Please contact...

6
ENGLISH
Overview of the projector
Normal
On Menu
On PC
card MenuFINE  (
)
Adjust FINE  (-)
Select the setting
item (Left)
Select previous
image (Left)FINE ()
Adjust FINE(+)
Select the setting
item (Right)
Select next
image (Right)FOCUS / ZOOM
FOCUS or ZOOM
setting
Enter the layer
setting
Select the
group (-)AUTO POSITION
Adjust position
when incorrect
Ð
Select the
group (+)
lamp lid
Caution:
Do not replace the lamp right after using the projector. The lamp is 
very hot. Switch the projector to stand-by...

7
ENGLISH
PC analog RGB input
Use to input video signals (analog
RGB) of a personal computer.
(Pin assignment of Mini D-SUB 15P jack)
PIN NO. SPEC PIN NO. SPEC
1 R(RED)/CR9Ð
2G(GREEN)/Y10 GROUND
3B(BLUE)/CB11 GROUND
4 GROUND 12 Ð
5 GROUND 13 HD/CS
6 GROUND 14 VD
7 GROUND 15 Ð
8 GROUND
1 5
116
10
15
RS-232C input
Connect here when you control this Projector with a
personal computer using PCGC (personal computer
graphic controller) or with a remote controller using
SpacePointer function.
RS-232C 1 input...

8
ENGLISH
Overview of the remote control
The operations of these buttons varies as follows depending on the modes selected:
Normal
On Menu
On PC
card Menu
PinP
EXPAND$ $$ $
$
Adjust FINE  (-)
Select the setting
item (Left)
Select previous
image (Left)
Exchange the image
(main or sub)
Expand different
area (Left)% %% %
%
Adjust FINE(+)
Select the setting
item (Right)
Select next
image (Right)
Exchange the image
(main or sub)
Expand different
area (Right)} }} }
}
Adjust FOCUS or
ZOOM (-)
Set the setting...

9
ENGLISH
Important:
¥ To save battery power, turn off the operation indicator by pressing the START/STOP button when not in use.
¥ To save battery power, the operation indicator will turn off if the remote control is not operated for a period of
5 minutes.
Battery installation
Use two AA size batteries.
1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the
arrow.
2. Load the batteries making sure that they are positioned correctly (+ to +, and -...

10
ENGLISH
Preparing the projector for operation
Orientation of the projector
Picture size can be set by changing the distance between the screen and the projector.
Front projection
To find the approximate distance
between the projector and screen:
Multiply the width of the screen
x 1.875 - 1.975 (max.) ,
Multiply the width of the screen
x 2.468 - 2.57 (min.) ,
¥ Refer to the chart to recom-
mended distances in maximum
zoom and minimum zoom.
Diagonal size
 (inch)
40 
60 
80 
100 
120 
140 
160 
180 
200...