InFocus Projector C410-420 User Manual
Here you can view all the pages of manual InFocus Projector C410-420 User Manual. The InFocus manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
30 Picture menuTo adjust the following six settings, highlight the setting, press Select, use the up and down arrows to adjust the values, then press select to confirm the changes. Ve r t i c a l K e y s t o n e: adjusts the image vertically and makes a squarer image. You can also adjust vertical keystone from the keypad. Horizontal Keystone: adjusts the image horizontally and makes a squarer image. Contrast: controls the degree of difference between the lightest and darkest parts of the picture...
Page 32
31 Presets: The provided Presets optimize the projector for displaying com- puter presentations, photographs, film images, and video images. (Film input is material originally captured on a film camera, like a movie; video input is material originally captured on a video camera, like a TV show or sporting event.) You can use the preset as a starting point, then further cus- tomize the settings for each source. The settings you customize are saved in the preset for each source. To restore the factory...
Page 33
32 Advanced settings Sharpness: (video sources only) changes the clarity of the edges of a video image. Select a sharpness setting. Color Space: This option applies to computer and component video sources. It allows you to select a color space that has been specifically tuned for the video input. When Auto is selected, the projector automatically determines the standard. To choose a different setting, turn off Auto, then choose RGB for computer sources, choose either SMPTE240, REC709 or REC601 for...
Page 34
33 Settings menuAudio: allows adjustments to the volume, bass, treble and balance. Also allows you to turn on and off Loudness (which boosts the higher and lower frequencies), the Internal speakers, and projector startup Chime. Sources : allows you to assign a particular input to a specific source key when using the optional Integrator remote. Also allows selection of a default Startup Source and enables or disables Autosource and RGB. Sources>Startup Source: this determines which source the...
Page 35
34 Screen Save: automatically blanks the screen after no signals are detected for five minutes. The image returns when an active source is detected or a remote or keypad button is pressed. Screen Save is disabled when Power Save is enabled. Screen Trigger : this enables the Screen Trigger connection on the connector panel. See page 6 for details. Startup Logo: allows you to display a blank Black, White, or Blue screen instead of the default screen at startup and when no source is detected. It also...
Page 36
35 Effect Key: allows you to assign a different function to the Effect button on the remote to quickly and easily use the effect. Only one effect can be enabled at a time. Highlight an effect and press Select to choose a different one. Blank: shows an empty screen. Mute: turns off all sound. Aspect Ratio: sets the ratio of the image width to image height. Source: cycles through the available sources. Auto Image: causes computer sources to be reacquired. Freeze: pauses the projected image. Zoom: Is...
Page 37
36 Network: The projector has an RJ45 Ethernet connector that supports net- work connections and TCP/IP protocols. This will allow for the control and management of the projector over a corporate network. The following fields are accessible when DHCP is not checked and available for manual entry of data. IP Address: Identifies the projector on the network. Subnet mask: Separates the network address part of the IP address. Default gateway: The IP address of the local router. DHCP: Select this to...
Page 38
37 MaintenanceCleaning the lens1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth. Avoid using an excessive amount of cleaner, and don’t apply the cleaner directly to the lens. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. 2 Lightly wipe the cleaning cloth over the lens in a circular motion. If you don’t intend to use the projector immediately, replace the lens cap. Changing the lensOptional long throw and short throw lenses are available. See “Optional...
Page 39
38 Replacing the projection lampThe lamp hour timer in the About menu counts the number of hours the lamp has been in use. When the specified end of the lamp’s life is reached, the message “Replace lamp” briefly appears on the screen at each startup and in the Interactive Display. You can order new lamp modules from your dealer. See “Accessories” on page 41 for information.1 Turn off the projector and unplug the power cable. 2 Wait 60 minutes to allow the projector to cool thoroughly. 3 Turn the...
Page 40
39 WARNINGS: To avoid burns, allow the projector to cool for at least 60 minutes before you replace the lamp. Do not drop the lamp module. The glass may shatter and cause injury. Do not touch the glass lamp screen. Fingerprints can obscure projection sharpness. Be extremely careful when removing the lamp housing. In the unlikely event that the lamp ruptures, small glass fragments may be generated. The lamp module is designed to contain most of these fragments, but use caution when removing...