Home > JBL > Subwoofer > JBL Sb 2 Manual

JBL Sb 2 Manual

Here you can view all the pages of manual JBL Sb 2 Manual. The JBL manuals for Subwoofer are available online for free. You can easily download all the documents as PDF.

Page 1

SatelliteOutputs
LeftRight
     System #5 in Stereo
  SPL (at 20 Feet):                94 dB Continuous (peaks of 104 dB)
 FromPower Amp
Left
Right
MODULE SETTINGS:Stereo / Mono Selector:  Stereo4-Ohm / 8-Ohm Selector:  4-Ohms
      InputTerminals
              Control SB-210 withMTC-210-SAT Crossover Input Module
Control 25AV  (8 ohm setting)Control 25AV  (8 ohm setting)Control 25AV  (8 ohm setting)Control 25AV  (8 ohm setting)

Using subwoofers and satellite loudspeakers with a pre-engineered passive...

Page 2


Page 3

Table of  Contents
SIX SUB-SAT SYSTEMS AT A GLANCE   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
IMPORTANT SATELLITE CONNECTION INFORMATION  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
SYSTEM CONSIDERATIONS 
 General Objectives    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  ....

Page 4

SUB-SAT SYSTEMS AT A GLANCE
Detailed Information About Each System and Application Guidelines are on\
 the Following Pages.
System 
NumberProductsApplications
SPL(Max Cont. @ 20 ft)Modes
Ω Per 
Amp 
Channel
Surface-Mount 
(On-Wall)  
Satellite Speakers
System 1(CCS6000)4 x Control 23
1 x SB-2
Light volume ambient music in 
medium size spaces where four 
speakers are needed.
87 dBStereo Only4Ω
System 22 x Control 25AV
1 x SB210
1 x MTC-210-SAT
Light to medium volume ambient 
music in small to medium...

Page 5

Important Satellite Connection Information 
For Mono (& 70V Mono) Systems
For Mono systems, always connect half the satellite speakers to one of the sa\
tellite speaker output terminals and the other half to the 
other satellite speaker output terminals.   Do NOT connect to only one of the sets of satellite output terminals .  
In order to avoid excessively low impedance loads to the power amp when using 4 satellite speakers (which could cause the power 
amplifier to fail), the satellite output...

Page 6

The exact configuration of a subwoofer/satellite loudspeaker system depends on a number of factors, such\
 as:• How large the room is and how many satellite speakers it will take to cover the room?   
•  Whether the distance between the satellite speakers allows a single subwoofer to cover the entire space?   
•  Whether the program material is light background music or dominant driving music?   
•  Where the subwoofer will be located in relation to room boundaries (wall, ceiling, corners)?  
The system...

Page 7

Sub-Sat Design Considerations
Sound Level Capability
For each system in this guide, the Max SPL figure is listed, 
describing the continuous sound level that the system can 
maintain on a full-range basis with either speech or music 
program content, with 10 dB headroom for clear transient 
peaks.    
For any installation, the satellite speakers might be located 
next to each other and cover exactly the same area, resulting 
in 6 dB of coupling between them, or they might be located 
far apart and have...

Page 8

Adjusting Volume of 70V/100V System
Adjust the tap setting to change the amount of power that 
gets to the entire sub/sat system. 
Multiple Systems 
Multiple sub-sat systems can be utilized on a single 
70V/100V distributed speaker line.  Each can cover a 
different area with full-range sound.  Systems can be mixed 
on a 70V/100V line as long as all the systems utilized the 
MTC-210T-SAT module.   See Figure 2.
Subwoofer Distance Consideration
Even though it’s not easy for the human ear to tell where...

Page 9

Systems with SURFACE-MOUNT (on-wall) 
Satellite Speakers
Application Note:
This combination produces a great full-range sound with flat 
frequency response, usable from 38 Hz to 22 kHz.  
Do NOT use a different quantity or model of satellite 
speaker .
  Changing to a different, higher sensitivity, satellite 
model unbalances the subwoofer/satellite sensitivity balance 
(see “Consideration” notes above), resulting in the mids and 
highs being overly dominant.  Similarly, changing to fewer 
Control 23...

Page 10

System #2
2 pcs Control 25AV & Control SB-210
Application: Light to medium volume ambient music in 
small to medium sized spaces where two satellite speakers are 
enough to cover the area.   This system produces excellent high 
fidelity sound quality with very strong bass.
Max Continuous Average SPL (at 20 feet): 91 dB (with 
peaks of 101 dB)
Max Output Balance -- The subwoofer has substantially 
higher maximum output capability than the satellite speakers, 
so this system has the capability of...
Start reading JBL Sb 2 Manual

Related Manuals for JBL Sb 2 Manual

All JBL manuals