JBL Sb350 Manual

							JBL CINEMA
™
 SB350
Home Cinema 2.1 soundbar with wireless subwoofer 
OwNEr’S MANu AL 
						

							45
JBL CINEMA SB350 
Introduction 
Thank you for choosing this JBL product. The JBL Cinema SB350 powered 
soundbar speaker system is a complete, integrated sound system that will\
 
create an extraordinarily realistic cinema experience in your own living\
 
room. The powered soundbar unit can mount on a wall or sit on a shelf an\
d 
comes complete with all of the cables required to connect it to your TV,\
 your 
cable/satellite tuner and disc player. The wireless subwoofer unit suppl\
ies 
all of your entertainment’s drama and impact, and can be placed anywh\
ere 
without needing to be connected to the soundbar unit.
We’re confident that this JBL system will provide every note of enjoy\
ment 
that you expect – and when the time comes to purchase additional audi\
o 
equipment for your home, car or office, you’ll choose JBL products.
This quick-start guide contains all the information you need to set up, \
connect and adjust your new speaker system. For more in-depth informatio\
n, 
please go to our website: www.jbl.com. 
Items included
JBL CINEMA SB350 
TABLE of CoNTENTS 
inTRODUCTiOn  5
iTemS inCLUDeD  5
JBL Cinema SB350 TOP PaneL COnTROLS    6
JBL Cinema SB350 SOUnDBaR ReaR PaneL COnTROLS anD COnneCTiOnS    6
JBL Cinema SB350 SUBWOOFeR COnTROLS anD COnneCTiOnS  7
RemOTe COnTROL FUnCTiOnS   7
PLaCinG THe JBL Cinema SB350   8 
OPeRaTiOn   9
TURninG THe JBL Cinema SB350 On anD OFF  9
OPeRaTinG THROUGH BLUeTOOTH
®    9
aDJUSTinG THe SySTem VOLUme  10
SURROUnD mODe BUTTOn   10
PROGRamminG JBL Cinema SB350 TO ReSPOnD TO yOUR TV RemOTe    10
TROUBLeSHOOTinG   11
SPeCiFiCaTiOnS   12Soundbar Optical cable
Analog aux cable
HDMI cable
Soundbar power cable
Subwoofer power cable
Wireless subwoofer
Remote
Wall mount accessories x 1
x 1
x 1
x 1 x 1 x 1 x 1 x 1
x 1
BAS S
www.jbl.com
english  
						

							67
JBL CINEMA SB350 SouNdBAr 
rEAr PANEL CoNTroLS ANd 
CoNNECTIoNS  
(Software
update only) HDMI TV
(ARC)
Aux-in
Optical
Power
Input A CRemove Caps
Power Switch: The power switch turns the JBL Cinema SB350 
On/OFF. This switch must be turned on before you can operate the system. 
Once this switch is turned on, the system will enter Standby mode   
(the top-panel power indicator will be amber). 
Power Input AC: Connect the supplied aC power cable to
this input.
HdMI TV (ArC): Connect your television to this input using the 
supplied HDmi
® cable only if your television HDmi input supports audio 
Return Channel (aRC) feature, the audio signal from the television will 
be automatically sent back to the soundbar with this single cable. if your 
television does not support aRC, you need to use the optical or analog
connections based on your television’s compatibility. Please refer to\
 your 
television user guide to confirm HDmi aRC support.
Pairing Button and LEd: Press the Pairing button to 
initiate wireless pairing between the soundbar and the wireless subwoofe\
r. 
See Pairing the Units for Wireless Operation, on page 9 for more informa\
tion.
EQ Switch: Use this switch to adjust the soundbar’s bass for either 
wall or table mounting.
Aux input (Analog Audio in): you can connect an 
analog audio device to the Cinema SB350 by using the supplied 3.5 mm   
to RCa cable.
optical (digital Audio in): if your TV, disc player or 
cable/satellite tuner has an optical digital output, use the included op\
tical 
cable to connect it here. Once a Dolby Digital audio stream is sensed by\
 the 
soundbar, its Dolby Digital decoding becomes active.
uSB Port: For software update only.
JBL CINEMA SB350 ToP PANEL 
CoNTroLS 
12453
Optical audio in Aux-in Analo g
HDMI TV (ARC )
LED
Colo r
Power Button: The Power button toggles the JBL Cinema SB350 
between On and Standby. When the JBL Cinema SB350 is in Standby mode 
(the button LeD indicator is amber), press this button to turn the system 
On (the button LeD indicator turns white). The subwoofer will remain on for 
approximately ten minutes after the soundbar goes into Standby mode. if the 
system is in mUTe mode, the power indicator will also blink white. 
NoTE:  The JBL CINEMA SB350 and wireless subwoofer 
will switch into standby mode after 10 minutes of inactivity.
Auto turn-on: The JBL Cinema SB350 has a signal detector that 
automatically turns the unit On when it senses an audio signal on the HDmi
® 
input or paired Bluetooth source (when using HDmi, TV must support HDmi  
aRC). The auto turn-on mode gets activated for analog or optical inputs \
only 
when the JBL Cinema SB350 detects an audio signal on the input it was on 
before going into automatic Standby mode.
NoTE:  If the JBL CINEMA SB350 is put in standby using 
the power button, this will deactivate the auto turn-on 
feature on the analog and optical inputs.
Source Button: The Source can be changed by pressing the 
Source Selection Button. Cycle through options to select your preferred \
Source 
in this order: aUX > OPTiCaL > HDmi aRC > aUX.
Volume up/down Buttons: Press the ( – ) button to 
reduce the volume, press the ( + ) button to increase the volume.
NoTE:  Pressing both Volume buttons at the same time will 
mute the system. Pressing either Volume buttons while the 
system is muted will restore the sound.
Surround Mode Button: The surround mode button 
turns Harman Display Surround processing On and OFF. The surround mode 
indicator turns amber when Harman Display Surround is active and turns 
white when Harman Display Surround is not active (normal stereo sound –\
   
see page 10 for more details).
Bluetooth
® (BT): The Bluetooth button is used to set the JBL 
Cinema SB350 into Bluetooth mode. you can pair the system with Bluetooth-
enabled devices using this button (see page 9).
NoTE:  JBL CINEMA SB350’s Bluetooth device name is 
CINEMA SB350.
JBL CINEMA SB350 SuBWoofEr 
CoNTroLS ANd CoNNECTIoNS  
1
2
4
3
Power Indicator: When the subwoofer is in standby mode 
the LeD indicator is amber. When the system is turned On the LeD indicator 
becomes white.
Phase Switch: This switch determines whether the subwoofer 
driver’s piston-like action moves in and out in phase with the speake\
rs in 
the soundbar. if the subwoofer were to play out-of-phase with the soundbar 
speakers, some of the sound waves produced by the subwoofer or
soundbar could be canceled, reducing bass performance and sonic impact. \
This phenomenon depends in part on the relative placement of the speaker\
s 
in the room. Refer page 8, for more information.
Wireless Pairing button and LEd  
indicator: Press this button to initiate wireless pairing between the 
subwoofer and the soundbar. See Pairing the Units for Wireless Operation\
,   
on page 9, for more information.
•	 The	LED	lights	blue	continuously	when	the	subwoofer	is	on	and	linked	to 	
the soundbar.
•		The	LED	slowly	flashes	blue	when	the	subwoofer	is	on	and	the	wireless	link 	
is not established between the subwoofer and the soundbar.
•		The	LED	rapidly	flashes	blue	during	the	wireless	pairing	process.
Power Input AC: Connect the supplied aC power cable  
to this input.
rEMoTE CoNTroL fuNCTIoNS
  
3
2
5
7
11
6
8
9
12
BASS
1
4
10
The following command buttons are included with the remote control: 
  1.  Power on/Standby
 2.  Bluetooth
  3.  HDmi aRC
  4.  aux-in (analog)
  5.  Optical (Digital)
  6.  audio Feedback
 7.  mute
  8.  Volume +/-
  9.  Subwoofer Volume +/-
10.  Harman Display Surround
11. Stereo
12.  Harman Volume
Power on/Standby: To bring the JBL Cinema SB350 to 
operational mode from Standby mode, press the Power button (the power 
indicator on the JBL Cinema SB350 will turn white). To put the system in 
the Standby mode, press the power button while the system is switched On 
(the power indicator on the JBL Cinema SB350 will turn amber). if you do 
not press the Power button, the JBL Cinema SB350 will automatically go into 
Standby mode approximately 10 minutes after the audio input signal stops\
.
Bluetooth:  This button is used to set the soundbar into Bluetooth 
mode. it is also the same button that will be used to pair your system with 
Bluetooth-enabled devices. Use a Short Press to switch to Bluetooth sour\
ce. 
Press and hold to make the unit go into pairing mode.
NoTE: JBL CINEMA SB350’s Bluetooth device name is 
CINEMA SB350.
HdMI
® ArC: Press this button to select an HDmi TV source.
Aux-In (Analog): Press this button to select an analog source. 
optical (digital): Press this button to select a Digital source. 
Audio feedback: The audio Feedback button on the remote 
control enables/disables audio feedback. When enabled, this feature will\
 
add an audible tone to help you recognize when these other features are \
engaged: 
1. Bluetooth 
2. Harman Volume on/off
3. Subwoofer volume control 
4. audio feedback on/off
When audio Feedback is disabled, you will not hear any audible tone when 
using these functions.
Mute: Press the mute button to mute the sound, press the mute button 
again or any Volume button to release the mute control.
Volume +/-: Press the “+” button to increase volume; press the “–” 
button to decrease volume.
Subwoofer Volume +/-: The Bass +/- buttons on the 
remote control increase and decrease the subwoofer levels. 
1) 
Power switch
2)   Power input aC
3)   HDmi aRC TV
4)  Subwoofer wireless pairing button and LeD indicator
5)  Wall / Table eQ
6)   analog audio in
7)   Optical audio in
8)   USB port 1) 
Power indicator
2)  Phase switch (0–180°)
3)  Wireless pairing button 
and LeD indicator
4)   Power input AC
USB
325
768
14
1) Power on / Standby
2)  Source selection
3)  Volume +/-
4)   Surround mode
5)  Bluetooth source / 
Pairing
www.jbl.com
English  
						

							89
Wall-mounting the soundbar
       
Note: For wall mounting, we recommend removing the feet of the soundbar 
by simply unscre wing and storing them for futu re use.
 
if your TV is attached to a wall, you can use the included wall-mount bra\
cket 
to mount the soundbar on the wall.
1.  Determine the location for the soundbar on the wall.
2.  Hold the bracket against the wall as a template and mark the locations o\
f 
the wall-mount bracket holes on the wall. The three holes should be even\
ly 
spaced 7-1/16"  (18cm) apart, and the bracket slots are designed to accept 
4mm screws. make sure that the holes are at the same height. See the 
illustration above. mark three bracket hole locations: 7-1/16"  (18cm) apart.
3.  making sure that the bracket’s flat side is against the wall, attach t\
he   
wall-mount bracket to the wall at the locations you marked, using 
hardware that is appropriate for the wall’s construction and material\
s. note 
that the soundbar weighs 7.3 lb (3.3kg). Be sure to use hardware that \
can 
support this weight.
4.  after reading the Connections section on page 6, connect all cables to th\
e  soundbar.	 •	 Set	the	soundbar’s	EQ	switch	in	the	“Wall”	position,	and	set	the		 	    soundbar’s Power switch in the “On” position. See Soundbar   
   Rear-Panel Controls and Connections, on page 6.
5.  attach the soundbar to the bracket by sliding the bracket’s upper tabs\
 into  the slots on the back of the soundbar. The soundbar’s slots allow you\
 to 
adjust the soundbar’s angle on the wall to ensure that it is level. insert tabs 
on bracket into grooves in soundbar.
Subwoofer placement
The performance of a subwoofer is directly related to its placement in t\
he 
listening room and its physical position relative to the other speakers \
in 
the system. While it is true that, in general, our ears do not hear dire\
ctional 
sounds at the low frequencies where subwoofers operate, remember that 
– when installing a subwoofer within the limited confines of a room –\
 the 
reflections, standing waves and absorptions generated within the room wi\
ll 
strongly influence the subwoofer system’s overall performance. as a result, 
the specific location of the subwoofer in the room becomes important to \
the 
amount and quality of bass that is produced.  IMPorTANT: 
Make sure that the subwoofer’s rear 
panel is at least 150 mm or 6"  away from the wall to allow  
for proper operation.  
 
    
you may place wireless subwoofer in the positions as represented in the 
above figure. 
•	 Placing	it	in	a	corner	that	is	position	(1)	will	maximize	the	amount	of	bass 	
in the room. However, corner placement can also increase the destructive\
 
effect of the standing waves on bass performance. This effect can vary 
depending on the listening position – some listening positions may yi\
eld 
very good results while others may have too much (or too little) bass \
at 
certain frequencies. 
•	 Placing	the	subwoofer	along	the	same	plane	as	the	soundbase	–	position 	
(2) – can produce the best integration between the sound of the sub\
woofer 
and the soundbase. in some rooms, the best performance can be resulted 
by placing the subwoofer behind the listening position (3). 
you can experiment with subwoofer placement by temporarily placing the 
subwoofer in the listening position and playing music with strong bass 
content. move it to various locations in the room while the system is playing 
until you determine where the location of the best bass performance occu\
rs. 
Place the subwoofer in that location. 
oPErATIoN 
Turning the JBL CINEMA SB350 oN and 
off
Manually:  First, make certain that the rear panel power switch is 
turned On. Then, short press the JBL Cinema SB350’s Power button either 
on the soundbar or the remote. To put the JBL Cinema SB350 into Standby 
manually, short press the Power button either on the soundbar or the rem\
ote 
again.
Auto turn-off: The JBL Cinema SB350 will automatically enter 
into Standby mode if no audio signal is detected at any of its source in\
put 
connections for approximately 10 minutes.
Auto turn-on: The JBL Cinema SB350 has a signal detector that 
automatically turns the unit On when it senses an audio signal on the HDmi
® 
input or paired Bluetooth source (when using HDmi, TV must support HDmi  
aRC). The auto turn-on mode gets activated for analog or optical inputs \
only 
when the JBL Cinema SB350 detects an audio signal on the input it was on 
before going into automatic Standby mode.
Harman display Surround: This button turns the 
JBL Cinema SB350’s Harman Display Surround processing On/OFF. The 
Surround button indicator on the JBL Cinema SB350 turns amber when 
Surround is active, and turns white when Stereo mode is active. The 
HaRman Display Surround setting will produce a complete surround-sound 
experience for anyone sitting in front of and several feet away from the\
 
soundbar. although it is particularly effective when watching movies, you can 
also try the HaRman Display Surround setting for music.
Stereo: Use this button to switch your system into stereo mode. 
Harman Volume: The Harman Volume button on the remote 
control activates Harman Volume. Harman Volume helps you keep your sound\
 
levels consistent and reduces extreme volume transitions. These types of\
 
transitions are typically experienced with television commercial interru\
ption 
or movie transitions between quiet dialogue and loud sound effects. 
PLACING THE JBL CINEMA SB350 
 
Placing the soundbar on a table
if your TV is placed on a table, you can place the soundbar on the table 
directly in front of the TV stand, centered with the TV screen. as long as the 
surface of the table is flat, the soundbar will rest on its metal feet.
•	 Set	the	soundbar’s	EQ	switch	in	the	“Table”	position.	Refer	EQ	switch	on 	
page 6 for more information. NoTE: If the JBL CINEMA SB350 is put in standby using 
the power button, this will deactivate the auto turn-on 
feature on the analog and optical inputs.
Turning the subwoofer oN and off  
Once the subwoofer and soundbar have been paired (see Pairing the Units\
 
for Wireless Operation, below) the subwoofer will turn on when the soun\
dbar 
turns on and will remain on for approximately one minute after the sound\
bar 
enters the Standby mode, or for approximately 10 minutes after the audio\
 
signal ceases.
Pairing the Subwoofer to the soundbar 
            
1s
1s
Pr ess the pairing button on subwoofer for more  than 
1 second to pair the subwoofer to the soundbar.
Connected Pairing mode
Standby Mode
LED  
behavior
after turning the soundbar and subwoofer on for the first time, you will \
need 
to “pair” them both so they’ll both operate at the same wireles\
s frequency. 
To pair the units, press the Wireless Pairing switches on both units wit\
hin 
30 seconds of each other. The units will communicate with each other and\
 
operate at the same frequency.
NoTE:  The maximum wireless operating distance 
between the soundbar and subwoofer is approximately   
50 feet (15.3m).
operating through Bluetooth
® 
 
     
JBL  SB350
JBL SB350LED 
behavio r
Pairing mode No device connecte d
Device connecte d
To wirelessly stream audio to the soundbar from a Bluetooth-enabled devi\
ce:
1. Confirm that the JBL Cinema SB350 is in the Bluetooth pairing mode (the 
Bluetooth button LeD will be flashing blue). if the LeD is not flashing blue, 
press and hold the Bluetooth button until its LeD starts flashing blue.
2.  Place your Bluetooth-streaming device in pairing mode.
3.  Use your device’s Bluetooth-pairing menu to pair it with the JBL Cinema  
www.jbl.com
English  
						

							1011
SB350. The system will appear as “Cinema SB350” in the list of Bluetooth 
available devices. When the JBL Cinema SB350’s Bluetooth button LeD 
illuminates constantly, it is paired with your device and you can stream\
 
audio via Bluetooth from the device to the JBL Cinema SB350.
To listen to audio from the Bluetooth device, press the Bluetooth source\
 button 
on the JBL Cinema SB350 or remote to activate the source. if the JBL Cinema  
SB350 is in Standby mode, you can automatically wake up the system by 
starting to stream an audio Bluetooth signal to the JBL Cinema SB350 as long 
as your device has already been paired with the JBL Cinema SB350.   
To disconnect the Bluetooth device, press and hold the JBL Cinema SB350’s 
Bluetooth button until the LeD begins flashing.
NoTE: 
•	 You	can	manually	switch	sources	to	the	paired	Bluetooth	device	by 	
pressing the JBL Cinema SB350’s Bluetooth button.
•	 If	you	switch	the	JBL	CINEMA	SB350	to	a	different	source	while	a	paired 	
Bluetooth device is streaming to the system, the JBL Cinema SB350 will 
send a STOP command and the Bluetooth device will stop streaming.
•	 While	pairing	the	Bluetooth	device	for	the	first	time,	it	may	reset	the	volume 	
level to maximum.
Adjusting the System Volume
For the best sound, we recommend turning your TV’s built-in speakers \
off. 
Consult your TV’s owner’s manual to find out how to do this. if there is no way 
to turn your TV’s speakers off, you can adjust the TV’s volume so \
that your 
JBL Cinema SB350 system will always supply most of the sound:
1. Using the volume buttons on your TV, turn its volume all the way down\
.
2. Use the JBL Cinema SB350’s Volume Up/Down buttons to set the sound 
to a comfortable listening level. This way, your JBL Cinema SB350 system 
should always be louder than your TV speakers.
IMPorTANT: If you play the JBL CINEMA SB350 at 
more than 50% of max volume it will automatically reset at 
50% of the max volume when it is turned off using either the 
power button or the auto turn off function.
Surround Mode Button 
Press the soundbar’s or remote’s Surround mode indicator to switch the 
sound between normal stereo and surround sound providing a complete 
surround-sound experience for anyone sitting in front of and several fee\
t away 
from the soundbar. although it is particularly effective when watching movies, 
you can also take advantage of the Surround setting for adding to your m\
usic-
listening experience.
Programming JBL CINEMA SB350 to 
respond to Your TV remote  
you can program the JBL Cinema SB350 to make it respond to your   
TV remote’s power, mute, volume up and volume down commands.   
This programming lets you control power and volume functions of your   
JBL Cinema SB350 soundbar with your TV remote. Before beginning   
to program the JBL Cinema SB350, have your TV remote in hand.   
We recommend sitting down in front of the soundbar.   TrouBLESHooTING 
if your JBL Cinema SB350 system does not perform the way you think it should, check whethe\
r the problem is covered in this section before contacting your 
dealer or a JBL representative.
Problems Solutions
if the soundbar does not turn On •	 Check	if	the	soundbar	power	supply’s	AC	cord	is	plugged	into	a	working	AC	
outlet and that the power supply is plugged into the soundbar.
if the subwoofer does not turn On •	 Check	if	the	subwoofer’s	power	cord	is	plugged	into	a	working	AC	outlet.
•	 Press	the	Power	switch	of	the	subwoofer.
•	 Check	if	the	subwoofer’s	 AC	fuse	has	blown.	See	Subwoofer	Rear	Panel 	
Controls.
if there is no sound coming from both the soundbar and the subwoofer •	 Check	if	soundbar	is	ON	(the	Power	Indicator	should	be	white).
•	 Check	if	the	cable	connecting	the	TV	or	other	source	component	to	soundbar 	
is properly connected at both ends.
•	 Check	if	the	soundbar’s	Source	Selector	is	set	to	the	correct	source	and	that 	
source is playing an audio signal.
•	 Check	if	the	system	is	not	muted. 	If	the	system	is	muted,	press	the	volume	
buttons to un-mute the system.
•	 Check	if	the	soundbar’s	volume	is	not	turned	all	the	way	down	(the	lowest 	
setting of the Volume Down button will mute the system).
if there is no sound coming only from the subwoofer •	 Check	if	the	Subwoofer	Volume	Control	is	not	turned	all	the	way	down	using 	
the remote control.
•	 Check	if	the	wireless	connection	is	still	active	(Blue	LED	constant	in	the	back 	
of the subwoofer). if the LeD is flashing blue, then restart the pairing process.
•	 Move	the	subwoofer	closer	to	the	soundbar. 	The	maximum	wireless	operation 	
distance is 50 feet (15.3 m).
if the soundbar’s sound is distorted •	 Check	the	source	component	to	see	if	the	distortion	is	coming	from	it,	and	not	
from soundbar.
if there is sound from the system, even when the soundbar’s volume is turned all 
the way up •	 If	the	
TV	or	source	component	is	connected	via	a	variable	output, 	check	its	
instructions if the output is not turned down too low.
if the bass output is not loud enough •	 Turn	up	the	subwoofer’s	volume	using	the	remote	control.
•	 Move	the	subwoofer	at	a	corner	of	the	room.
•	 Move	the	subwoofer	closer	to	the	seating	location.
The volume is reset when i turn on the soundbar •	 This	is	actually	an	inbuilt	feature	of	the	soundbar.	If	the	soundbar	is	playing	
at more than 50 percent of maximum volume and the power is turned off, the 
volume of the soundbar is automatically reset to 50 percent of the maximum 
volume when the system is turned On.
my TV is On and my SB350 is in Standby. When i switch off my television, it turns 
my SB350 On •	 This	is	actually	related	to	some	issue	on	some	television	having	wrong	Hot
	
Plug Detection (HPD) protocol.  you can activate/deactivate HPD protocol by 
pressing the Surround and Volume buttons simultaneously.
NoTE:  Some steps will time out, so read through this 
entire process before you begin. 
Have the TV remote in hand. When you start programming the remote, be 
ready to aim the TV remote to the front of the soundbar from about   
300mm–900mm (12–36 inches) away. 
TV remote
To program the power, volume down, volume up and mute commands: 
1.  ensure that the JBL Cinema SB350 is On. 
2.  On the soundbar, press and hold the top-panel Surround button until the 
LeD flashes amber. if the LeD does not flash after three seconds, release 
the buttons and try again. 
3.  Press the soundbar top-panel button you want to program (Power, Volume 
Down, Volume Up, Volume Down and Up simultaneously for mute). 
4.  aim the TV remote at the front of the soundbar and slowly press the  corresponding button on the top-panel button until the Surround button 
on the soundbar flashes white for one second. This indicates that the 
programming operation has been successful. 
5.  To exit the learning mode (at any time or when the learning is complete\
), 
press and hold the soundbar Surround button until the amber LeD stops 
flashing. 
NoTE: If you would like to program a new TV remote 
control or you are missing a command, restart the whole 
process.
To reset the JBL Cinema SB350 remote settings:
1. Press the top-panel power button to enter Standby mode (amber color \
   
    indicator)
2. Press and hold the Surround and Volume (–) buttons simultaneousl\
y 
Once factory defaults are restored, the JBL Cinema SB350 surround button 
will flash white for one second, then the unit will enter into operation\
al mode.
www.jbl.com
english  
						

							12
Frequency response: 45Hz – 20kHz
maximum SPL: 100dB
JBL Cinema SB350 includes two-way, dual driver left and right speaker mo\
dules, each with two 55mm (2.25") 
full range drivers and a 32mm (1.25" ) dome tweeter
Wireless, powered subwoofer with a 165mm (6.5" ) driver in a ported enclosure
Total Cinema SB350 amplifier power: 320W max
Dolby
® Digital Decoding
One HDmi
® output with audio Return Channel (aRC)
Bluetooth
® connectivity
One stereo analog-audio input 
One optical digital input 
One USB port for software update
Dimensions: Soundbar (L x W x H): 39.4"  x 2.4" x 3.1" (1000 x 62 x 78mm)  
 
Weight: 7.3lb (3.3kg)
Subwoofer (L x W x H): 9.5"  x 9.5" x 12.6"  (242 x 242 x 320mm)  
  Weight: 10.6lb (4.8kg)
SPECIfICATIoNS
© 2014 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. “Hear the truth” l\
ogo 
is a trademark of HARMAN International Industries, Incorporated. 
The Bluetooth
® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by \
HARMAN 
International Industries, Incorporated is under license. Other trademarks and\
 trade names are those of their respective owners.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI, the HDMI logo, and High-Definition Multimedia Interface \
are trademarks or registered trademarks of HDMI Licensing LLC in the 
United States and other countries.
Features, specifications and appearance are subject to change without notice. HARMAN International Industries, Inc.
 
8500 Balboa Boulevard, Northridge, CA 91329 USA  www.jbl.com