JVC Av 2100be Instructions

							5
PICTURE MODE
PICTURE SETTING
WHITE BALANCE  NORMAL
ECO MODE
ON TIMER
OFF TIMERMENU (1 / 3)
FUNCTIONS
Using the TV’s MENUMENU ItemDescription 
(Setting / Adjustment)
PICTURE MODE USER Change picture settings 
(\ PICTURE SETTING) 
VIVID Heightens contrast and sharpness
SOFT Softens contrast and sharpness
PICTURE SETTING
 PICTURE SETTING can 
operate when PICTURE 
MODE is set to USER 
(\ PICTURE MODE)
On screen scale colour
Center position : Yellow
Others position : GreenCONTRAST Adjust contrast (Lower j Higher)
BRIGHT Adjust brightness 
(Darker j Brighter)
SHARP Adjust sharpness 
(Softer j Higher)
COLOUR Adjust colour (Lighter j Deeper)
TINT Adjust colour tint 
(Reddish j Greenish)
RESET Reset all items level to center
WHITE BALANCE NORMAL Normal white balance
COOL Bluish white
WARM Reddish white
ECO MODE Adjust picture contrast 
according to room 
brightnessOFF Cancel the function
ECO-1 Mild contrast (recommended)
ECO-2 Even contrast
ON TIMER Turns on the TV from standby mode (\ page 7)
OFF TIMER Turns off the TV to standby mode (\ page 7)
AI VOLUME ON Sets the volume level for all 
channels and video inputs 
automatically depends on the 
strength of signal from the source.
OFF Volume can be adjusted individually 
for each channel
CHILD LOCK ON Disable the front buttons of the TV
OFF Cancel the function
BLUE BACK ON Displays a blue screen and mutes 
the sound when signal from the 
aerial is weak or absent
OFF Cancel the function
VNR To reduces the picture 
noise AUTO Effect of VNR is automatically 
controlled
MIN Effect of VNR becomes minimum
MAX Effect of VNR becomes maximum
OFF Cancel the function
GAME Select a game to play (PUZZLE / TWINS) 
(\ page 7)
LANGUAGE Choose your desired on screen display language.
AUTO PROGRAM Automatically registers channels (\ page 6)
MANUAL PROGRAM Manually search channels and fine-tunes 
channels (\ page 6)
INSERT / DELETE Add, delete and move registered channels 
(\ page 6)
COLOUR SYSTEM Select the appropriate system 
(In TV mode: AUTO / PAL / SECAM)
(In VIDEO mode: AUTO / PAL / SECAM / 
NTSC 3.58 / NTSC 4.43) (\ page 7)
SOUND SYSTEM Select the appropriate system (BG / I / DK) 
(\ page 7)
  To return to previous screen 
 
  To exit from Menu 
 or 
Display MENU
Showing MENU
page 1 of 3
On-screen guide / 
 Select function, go to 
previous/next page
 / 
 Display function setting.
 / 
 Change setting
Operating the menus
GGT0149-001A-H-EN.indd   5GGT0149-001A-H-EN.indd   5
20-04-07   15:31:4420-04-07   15:31:44
 
						

							6Presetting TV channelsAUTO PROGRAM
AUTO PROGRAM MENU
1
2
3
4
orto stop or when AUTO PROGRAM fi nishes.
MANUAL PROGRAM screen appears (\ MANUAL PROGRAM).
MANUAL PROGRAM
MENU
1
2
3
4
to exit.MANUAL PROGRAM
MANUAL PROGRAMVOLUME-/+  : SEARCH-/+
    /  : FINE-/+
DISPLAY : SOUND SYSTEMPR  CH/CC
01 I CC 20
02 I CH 30
03 I CH 40
04 I CH 50
05 I CH 60
To search for a 
channel manually 
(SEARCH)1.  Select the PR number you wish to store the 
channel.
2.  Press the VOLUME +/- button to start searching 
from the present channel. Searching stops when 
the following channel is found.
To  fi ne-tune a channel 
(FINE)1.  Select the channel you wish to fi ne-tune.
2. Press the 
 or 
 button until a clear picture is 
obtained.
INSERT / DELETE After this operation, other channels PR number will be changed.
INSERT / DELETE MENU
1
2
To add the new 
channel (INSERT)1.  Select the PR number you wish to store the new 
channel.
2.  Press the VOLUME+ button.
3. Press 
 button to choose “CH” or “CC”.
4.  Enter the CH/CC number for the channel you wish to 
add. The TV starts to search for the channel.  
Certain channels are not available in some countries.
  If you cannot receive a channel by INSERT, use 
MANUAL PROGRAM.
To delete a 
channel (DELETE)Select the channel you wish to delete and press 
.
To change the PR 
number (MOVE)1.  Select the PR number you wish to move.
2. Press the 
 button.
3. Press 
 or 
 button to move it to the new PR number.
4. Press 
 button.
4
to exit.
AUTO PROGRAMOK: MANUAL PROGRAM VH
INSERT / DELETE MOVEVOLUME+ : INSERT
MUTING    : DELETE PR  CH/CC
01 I CC 20
02 I CH 30
03 I CH 40
04 I CH 50
05 I CH 60
or
or
3
CH/CC CCIR OIRT CH/CC CCIR OIRT CH/CC CCIR OIRT
CH02 E2 R1 CH21 E21 CC01 S-1
CH03 E3 CH22 E22 CC02 S-2
CH04 E4 R2
CH05 E5 R6
CH06 E6 R7
CH07 E7 R8 CC41 S-41
CH08 E8 R9 CC75 X
CH09 E9 CC76 Y R3
CH10 E10 R10 CC77 Z R4
CH11 E11 R11 CC78 Z+1 R5
CH12 E12 R12 CH69 E69 CC79 Z+2CCIR: Middle East, Southeast Asia, etc..  OIRT: Russia etc..
Channel table
If noisy sound is heard 
and unsuitable sound 
system for your broad-
casting (\ Page 7)1.  Press DISPLAY button then on screen will 
change to Sound System, 
2.  Choose an appropriate sound system.
GGT0149-001A-H-EN.indd   6GGT0149-001A-H-EN.indd   6
20-04-07   15:31:4620-04-07   15:31:46
 
						

							7
Using the timer
Playing game
ON TIMER
ON TIMER MENU
1
2
3
ON TIMER
Choose the PR (channel) that you want to watch when the TV turns 
on. External input, AV position and any un-preset channel cannot be 
chosen for PR.
Set the ON TIMER to your desired period of time. When the ON TIMER 
is set to other than 00:00, the ON TIMER is activated. You can set the 
period of time to a maximum of 12 hours in 15-minute intervals.
To off the ON TIMER, set the time to 00:00.
OFF TIMER
When the remaining elapse time is one minute, “GOOD NIGHT!” 
appears on the screen.
You can display the OFF TIMER screen again to confi rm or change 
the remaining time.
To off the OFF TIMER, select OFF or turn off the TV’s main power.
OFF TIMER MENU
MENU
1
GAME
2
Select a game.PUZZLEThis game needs you to rearrange the numbers 1 to 15 in order 
by swapping the blank card with the numbered card.
TWINSThis game needs you to fi nd all the matching pairs of cards. If 
you open a correct pair, the card will stay uncovered. If you miss, 
they will fl ip back.
Instructions to play
UpRight DownLeft
OR
To move
Up Left Right Down
To move
To open a card 
(TWINS only)To restart the game To exit the game
Sound and Colour system in your country or regionArea Country or RegionSound 
SystemColour
System
Asia, 
Middle 
EastBahrain, Kuwait, Oman, Qatar, United Arab 
Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, India, etcB/G
PA L
China, Vietnam, etc.
D/K
Hong Kong, etc.
I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
B/G SECAM
Philippines, Taiwan, Myanmar, etc.
M NTSC
EuropeRussia, etc.
D/KSECAM
Czech Republic, Poland, etc.
PA L Germany, Holland, Belgium, etc.
B/G
UK, etc.
I
OceaniaAustralia, New Zealand, etc.
B/G PAL
AfricaRepublic of South Africa, etc.
I
PA L
Nigeria, etc.
B/G
Egypt, Morocco, etc.
SECAM
4
You can set the period of time to a maximum of 120 minutes in 10 
minutes intervals.
1
2
3
4
5
or
5
Note You can select OFF TIMER function by direct key.
GGT0149-001A-H-EN.indd   7GGT0149-001A-H-EN.indd   7
20-04-07   15:31:4920-04-07   15:31:49
 
						

							Troubleshooting
Specifi cations
If a problem occurs when you are using the TV, check the below trouble-
shooting guide before calling for repair.
Problem Cause / Solution
No or poor picture•  Turn OFF BLUE BACK if it is ON. (\ page 5)
•  Adjust the COLOUR or BRIGHT setting. Refer to 
“PICTURE SETTING”. (\ page 5)
•  Choose the appropriate colour system. (\ page 5)
Snowy picture•  Check the aerial and TV connections. (\ page 3)
Stripes or coloured 
patches appeared•  Interference caused by electrical appliances or 
speakers. Move them away from the TV.
Double-picture 
(ghosting)•  Interference caused by signal reflecting from mountains 
or buildings. Adjust the aerial’s direction or use another 
antenna.
No or poor sound•  Choose the appropriate sound system. (\ page 5)
White and bright still 
image looks as if it is 
coloured•  Inevitable phenomenon due to the nature of the picture 
tube. This is not a malfunction.
Image from video input 
is distorted•  The image was not properly recorded. This is not a 
malfunction.
Cannot operate the 
remote control•  Replace the batteries. (\ page 2)
•  Operate it at less than 7 meters from the TV.
Cannot operate the 
MENU•  Exit and enter the MENU again.
Cannot operate the 
front panel buttons•  Turn OFF CHILD LOCK if it is ON.
Image takes a while to 
be displayed•  Image requires time to stabilize before display. 
This is not a malfunction.
TV emits crackling 
sound•  Caused by a sudden change in temperature and it is not 
a malfunction. Call a service technician for inspection.
Static shock when 
touch the TV screen•  Caused by static electricity of the picture tube and it will 
not harm the human body. This is not a malfunction.
The TV turns off 
suddenly•  This is not a malfunction. If you had set the BLUE BACK 
function to ON, TV will be turned off automatically when 
no signals are received from an antenna for about 15 
minutes or longer.
© 2007 Victor Company of Japan, Limited0307SCT-NF-JMT
TV RF systemsB, G, I, D, K
Colour systemsPAL, SECAM, NTSC 3.58 MHz / NTSC 4.43 MHz 
(in VIDEO mode only)
Receiving 
channelsVHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
Power 
requirementsAC 160 to 240 V, 50 Hz / 60 Hz
External input / output
INPUTVIDEO input, AUDIO input
OUTPUTVIDEO output, AUDIO output
Headphone jackStereo mini jack (3.5 mm diameter)
Design and specifi cations are subject to change without notice.
GGT0149-001A-H-EN.indd   8GGT0149-001A-H-EN.indd   8
20-04-07   15:31:5120-04-07   15:31:51