JVC Av 2104ce Instructions

							11
Favorite channel and video setting
To register the favorite channel
You can register and recall 4 favorite channels by
using the colour buttons (red, green, yellow,
blue).
1In TV mode, select a TV channel (PR01- 99)
you desired to register.
2Press and hold a colour button for 3
seconds or more.
“FAVORITE CHANNEL 7 PROGRAMMED!”
appears on the screen and current channel
is registered.
3To register other favorite channels, repeat
Step 1 to 2.
To recall the favorite channel, press the colour
button.
When the TV is in Text mode or menu mode,
favorite channel function is not available.
To adjust favorite channel setting
(FAVORITE CH SETTING)
You can adjust the picture and sound settings for
the favorite channels.
1Display the PICTURE menu and select
FAVORITE CH SETTING in PICTURE
FEATURES menu.
❇
 
FAVORITE CH SETTING
MENUPICTUREPICTURE FEATURES
2Select FAVORITE CHANNEL in FAVORITE
CH SETTING menu, then choose the
desired favorite channel.
❇
 
FAVORITE CHANNEL
FAVORITE CH SETTING
FAVORITE CH SETTING
FAVORITE CHANNEL  PR 01
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
EFFECT ON
3Select EFFECT, then press 2/3 button to
choose ON.
To cancel the settings, choose OFF.
4Select the desired item that you wish to
adjust.
CONTRASTBRIGHTSHARP
TINT COLOUR
5Press the MENU/OK button to exit the
menu.
To adjust the video setting
(VIDEO SETTING)
You can adjust the picture and sound settings for
video inputs.
1Display the PICTURE menu and select
VIDEO SETTING in PICTURE FEATURES
menu.
❇
 
VIDEO SETTING
MENUPICTUREPICTURE FEATURES
2Select VIDEO STATUS in VIDEO SETTING
menu, then choose the desired video
input.
❇ 
VIDEO SETTINGVIDEO STATUS
VIDEO SETTING
VIDEO STATUS  VIDEO-1
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
EFFECT ON
3Select EFFECT, then press 2/3 button to
choose ON. To cancel the settings, choose
OFF.
4Select the desired item that you wish to
adjust.
CONTRASTBRIGHTSHARP
TINT COLOUR
5Press the MENU/OK button to exit the
menu.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
 GGT0035-001A-H-P02-15 5/12/04, 4:56 PM11
 
						

							12
Customized setting
VNR
You can reduce the noise.
Select the VNR in the PICTURE FEATURES menu
under PICTURE menu, then choose a setting of
VNR function.
❇
VNR
MENUPICTUREPICTURE FEATURES
OFF VNR is turned off.AUTO Effect of VNR is automatically controlled.MIN Effect of VNR becomes minimum level.MAX Effect of VNR becomes maximum level.If you select MAX, the picture becomes softer
even if the original picture is sharp.
LANGUAGE
You can choose your desired on screen display
language.
Select the LANGUAGE in the INSTALL menu,
then choose a language.
❇
MENUINSTALLLANGUAGE
CHILD LOCK
You can disable the front control buttons of the
TV.
Select the CHILD LOCK in the FEATURES menu,
then choose ON or OFF.
❇
MENUFEATURESCHILD LOCK
OFF TIMER
You can set the TV to turn off automatically to
standby mode after a set time.
Press the OFF TIMER button to select a desired
period of time.
OFF TIMER
0120
10
You can set the period of time to a maximum of
120 minutes in 10 minutes step.
To operate this function with a menu:
❇
MENUFEATURESOFF TIMER
When the elapsed of time left one minute,
“GOOD NIGHT!” appears on the screen.
You can display the OFF TIMER menu again to
confirm or change the remaining time.
AUTO SHUTOFF
You can set the TV to turn off automatically
when no signal is received for about 15 minutes
or longer after the end of a broadcast.
Select AUTO SHUTOFF in INSTALL menu, then
choose ON or OFF.
❇
MENUINSTALLAUTO SHUTOFF
The AUTO SHUTOFF function does not turn off
the TV’s main power.
The AUTO SHUTOFF function is not available in
video mode.
EXT. INPUT (TV/ VIDEO)
You can select TV or video terminal input with
one touch.
Press the TV/VIDEO button to select an input.
To operate this function with a menu:
❇
MENUINPUTEXT.INPUT
DISPLAY
You can display the programme number, video
terminal number and PR list on the screen.
Press the DISPLAY button to display the informa-
tion on screen.
To operate this function with a menu:
❇
MENUINPUTDISPLAY
About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
 GGT0035-001A-H-P02-15 5/12/04, 4:56 PM12
 
						

							13
TV channel presetting
To register the TV channels auto-
matically
You can register the TV channels into the TV’s
channel list automatically.
1Display the INSTALL menu.
❇ 
MENUINSTALL
2Choose AUTO PROGRAM, then press the
MENU/OK button.
AUTO PROGRAM function starts, and the
channels received are registered in the
channel list (PR list) automatically.
3 “SETUP TOUR RESTART?” appears.
To start thePress the MENU/OK button.
SETUP TOUR Then proceed to step 5 of
“Setting up your TV” on page
7.
To skip the Press the Red button.
SETUP TOUR
4 The EDIT menu appears.
To edit the Proceed to the Step 3 of “To
channel list edit the channel list (PR list)”
on this page.
If a channel is Proceed to the Step 3 of “To
not registered register the channel manually”
on this page.To exit the menu Press the MENU/OK button.
For details of “SETUP TOUR”, see page 7.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV’s
channel list manually.
1Display the INSTALL menu.
❇ 
MENUINSTALL
2Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
EDIT
PR   CH/CC
 7   CH 09 
 8   CH 11
 9 CH 13 
 10  
 11 
 12  
 13  
3■
3 Choose the channel which you want to
register.
4 Press the blue button to activate the
MANUAL function.
The sound system of the channel appears
at the right of the CH/CC number.
5 Press the 3 button to choose an appropri-
ate sound system.
For details, see “SOUND SYSTEM” on
page 14.
6 Press the green or red button to search for
the TV channel.
Searching stops when a channel is found
and displayed.
7 Repeat step 5 until your desired TV
channel appears.
If the reception Press the blue or yellow buttonis poor to fine tune the TV channel.
If noisy sound Press the 3 button to choose
is heard an appropriate sound system.
8 Press the MENU/OK button to exit the
menu.
To edit the channel list (PR LIST)
(MOVE and DELETE in the EDIT menu)
You can edit the TV channel list as you like.
Note: After this operation, other channel’s PR
numbers will be changed.
1Display the INSTALL menu.
❇ 
MENUINSTALL
2 Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
EDIT
PR   CH/CC
 7   CH 09 
 8   CH 11
 9 CH 13 
 10  
 11 
 12  
 13  
3■
3 Choose the channel which you want to
change PR number, or delete.
4 Do the following action:
To change the Press the 3 button. Then move
PR number it to the PR number you want
(MOVE) to use it for the channel.
Finally press the 2 button.
To delete the Press the yellow button.
channel (DELETE)
5 Press the MENU/OK button to exit the
menu.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
 GGT0035-001A-H-P02-15 5/12/04, 4:56 PM13
 
						

							14
TV channel presetting
To add in the new channel
(INSERT in the EDIT menu)
You can add in the new channel in the TV
channel list as you like.
You need to find the “CH/CC” number for the TV
channel. Find the “CH/CC” number correspond-
ing to the channel number of the TV channel
from the attached sheet “CH/CC number list” on
this page.
1Display the INSTALL menu.
❇ 
MENUINSTALL
2Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
3Choose the PR number for which you will
register a new TV channel.
4Press the green button, then press 5/∞
buttons to choose “CC” or “CH”.
5Press the number button to enter the
remaining CH/CC number.
The TV starts to search the TV channel,
and the picture of the TV channel appears.
If the TV finds no TV channel, a noisy
picture appears.
When a TV channel has already been registered
in PR99, using the INSERT function deletes that
TV channel.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
CH/CC number
When you want to use the INSERT function by
the previous operation, find the CH/CC number
corresponding to the channel number of the TV
channel from this table.
Channel No. CountryUS United States, Philippines, etc..CCIR Middle East, Southeast Asia, etc..OIRT Eastern Europe, Russia, Vietnam, etc..AUSTRALIA Australia, etc..
CH US CCIR OIRTAUSTRALIACH 02 US- 2 E2 R1 AU- 0CH 03 US- 3 E3 AU- 1CH 04 US- 4 E4 R2 AU- 2CH 05 US- 5 E5 R6 AU- 6CH 06 US- 6 E6 R7 AU- 7CH 07 US- 7 E7 R8 AU- 8CH 08 US- 8 E8 R9 AU- 9CH 09 US- 9 E9CH 10 US- 10 E10 R10 AU- 10CH 11 US- 11 E11 R11 AU- 11CH 12 US- 12 E12 R12CH 13 US- 13CH 14 US- 14, W+ 29CH 15 US- 15, W+ 30CH 16 US- 16, W+ 31CH 17 US- 17, W+ 32CH 18 US- 18, W+ 33CH 19 US- 19, W+ 34CH 20 US- 20, W+ 35CH 21 US- 21, W+ 36 E21CH 22 US- 22, W+ 37 E22CH 23 US- 23, W+ 38 E23CH 24 US- 24, W+ 39 E24CH 25 US- 25, W+ 40 E25CH 26 US- 26, W+ 41 E26CH 27 US- 27, W+ 42 E27CH 28 US- 28, W+ 43 E28CH 29 US- 29, W+ 44 E29CH 30 US- 30, W+ 45 E30CH 31 US- 31, W+ 46 E31CH 32 US- 32, W+ 47 E32CH 33 US- 33, W+ 48 E33CH 34 US- 34, W+ 49 E34
CH 35 US- 35, W+ 50 E35
CH US CCIR OIRTAUSTRALIACH 36 US- 36, W+ 51 E36CH 37 US- 37, W+ 52 E37CH 38 US- 38, W+ 53 E38CH 39 US- 39, W+ 54 E39CH 40 US- 40, W+ 55 E40CH 41 US- 41, W+ 56 E41CH 42 US- 42, W+ 57 E42CH 43 US- 43, W+ 58 E43CH 44 US- 44, W+ 59 E44CH 45 US- 45, W+ 60 E45CH 46 US- 46, W+ 61 E46CH 47 US- 47, W+ 62 E47CH 48 US- 48, W+ 63 E48CH 49 US- 49, W+ 64 E49CH 50 US- 50, W+ 65 E50CH 51 US- 51, W+ 66 E51CH 52 US- 52, W+ 67 E52CH 53 US- 53, W+ 68 E53CH 54 US- 54, W+ 69 E54CH 55 US- 55, W+ 70 E55CH 56 US- 56, W+ 71 E56CH 57 US- 57, W+ 72 E57CH 58 US- 58, W+ 73 E58CH 59 US- 59, W+ 74 E59CH 60 US- 60, W+ 75 E60CH 61 US- 61, W+ 76 E61CH 62 US- 62, W+ 77 E62CH 63 US- 63, W+ 78 E63CH 64 US- 64, W+ 79 E64CH 65 US- 65, W+ 80 E65CH 66 US- 66, W+ 81 E66CH 67 US- 67, W+ 82 E67CH 68 US- 68, W+ 83 E68
CH 69 US- 69, W+ 84 E69
CC US CCIR OIRTAUSTRALIACC 01 S- 1 AU- 5CC 02 S- 2CC 03 S- 3CC 04 S- 4CC 05 S- 5CC 06 S- 6 AU- 5ACC 07 S- 7CC 08 S- 8CC 09 S- 9CC 10 S- 10CC 11 S- 11CC 12 S- 12CC 13 S- 13CC 14 A S- 14CC 15 B S- 15CC 16 C S- 16CC 17 D S- 17CC 18 E S- 18CC 19 F S- 19CC 20 G S- 20CC 21 H S- 21CC 22 I S- 22CC 23 J S- 23CC 24 K S- 24CC 25 L S- 25CC 26 M S- 26CC 27 N S- 27CC 28 O S- 28CC 29 P S- 29CC 30 Q S- 30CC 31 R S- 31CC 32 S S- 32CC 33 T S- 33CC 34 U S- 34CC 35 V S- 35CC 36 W S- 36
CC 37 W+ 1 S- 37
CCUS CCIR OIRT AUSTRALIACC 38 W+ 2 S- 38CC 39 W+ 3 S- 39CC 40 W+ 4 S- 40CC 41 W+ 5 S- 41CC42 W+ 6CC 43 W+ 7CC 44 W+ 8CC 45 W+ 9CC 46 W+ 10CC 47 W+ 11CC 48 W+ 12CC 49 W+ 13CC 50 W+ 14CC 51 W+ 15CC 52 W+ 16CC 53 W+ 17CC 54 W+ 18CC 55 W+ 19CC 56 W+ 20CC 57 W+ 21CC 58 W+ 22CC 59 W+ 23CC 60 W+ 24CC 61 W+ 25CC 62 W+ 26CC 63 W+ 27CC 64 W+ 28CC 75 XCC 76 Y R3CC 77 Z R4 AU- 3C 78 Z+ 1  R5CC 79 Z+ 2 AU- 4CC 95 A- 5CC 96 A- 4CC 97 A- 3CC 98 A- 2
CC 99 A- 1
Channel
 GGT0035-001A-H-P02-15 5/12/04, 4:56 PM14
 
						

							15
Additional preparation
The illustrations shown in this section are for AV-21F14 only, which are used for explanation purpose.
Your TV may not look exactly the same as illustrated.
Before connecting
• Read the manuals provided with the devices
for the proper connection.
• Turn off all the devices including the TV.
• Note that connecting cables are not supplied.


	 	
 	

VIDEO -1
INPUT
VIDEO
AUDIO
OUTPUT
Front of the TV
Rear of the TV
VCR (for playing)
DVD player 
(Composite signals)
Headphones
VCR (for recording)
Camcorder or TV game
Troubleshooting
If a problem occurs when you are using the TV, check the following troubleshooting guide before
calling for repair.
No picture,
no sound
Snowy picture
Stripes appear
on the picture
Double-pictures
(ghosting) occur
Poor picture
White and bright
still image look as
if it were coloured
Top of the image
from software
products or video
tape is distorted• Deactivate the BLUE BACK function
if it is turned on.
• Choose the appropriate sound
system. Refer to “SOUND SYSTEM”
on page 10.
• Check the aerial cable and its
connection with the TV.
• Interference occurs caused by other
devices such as an amplifier,
personal computer, or a hair drier.
Move such devices away from your
TV.
• Interference occurs caused by
signal reflecting from mountains or
building. Try to adjust the aerial’s
direction or use a better directional-
ity antenna.
• Choose the appropriate colour
system. Refer to “COLOUR
SYSTEM” on page 8.
• Adjust the COLOUR or BRIGHT
setting. Refer to “Adjusting the
picture - USER” on page 8.
• Inevitable phenomenon due to the
nature of the picture tube. This is
not a malfunction.
• This is due to the condition of the
video signal whereby the image
was not recorded properly.
This is not a malfunction.
Cannot operate the
remote control
Cannot operate the
menus
Cannot operate the
front control
buttons
TV is turned off
suddenly
Colour patches
appear at the
corner of the
screen
Image takes a
short period to be
displayed
TV may emitted
crackling sound
Feel a slight
electric shock
when touching the
TV screen• The batteries may be exhausted.
Replace with new batteries (see
page 6).
• Ensure that you are operating the
remote less than seven meters from
the front of your TV.
• Press TV/VIDEO button to return to
TV mode and try operating the
menus.
• Deactivate the CHILD LOCK
function if it is turned on (see page
12).
• This may due to the AUTO SHUT
OFF function is activated. Press the
POWER button to turn on the TV.
• This may due to the magnetized
device such as a speaker near to
your TV. Keep the device apart
from your TV. Alternately, you can
also use the magnetic- shielded
speaker.
• Image required time to stabilize
before display.
This is not a malfunction.
• This is due to a sudden change in
temperature and it is not a
malfunction. If the crackling sound
is too frequent, request your service
technician for inspection.
• This is due to the static electricity
of the picture tube and it will not
harm the human body. This is not a
malfunction.
 GGT0035-001A-H-P02-15 5/12/04, 4:56 PM15
 
						

							TV RF systems
B/G, I, D/K
Colour systems
TV mode: PAL, SECAM
VIDEO mode: PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Receiving channels
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
Power requirements
AC 110 to 240 V, 50/60 Hz
External input / output
VIDEO-1: VIDEO input, AUDIO input
VIDEO-2: VIDEO input, AUDIO input,
OUTPUT: VIDEO output , AUDIO output
Headphone jack: stereo mini jack (3.5 mm diameter,
sound is monaural)
Teletext system 
FLOF (Fastext), WST (World Standard Text)
Language displayed by teletext 
Please see the table in the description ”TEXT LANGUAGE“ on page 9.
Design and specifications are subject to change without notice.
Specifications
0504-NIC-JMT © 2004 VICTOR COMPANY OF JAPAN, LIMITED
 GGT0035-001A-H-Cover 5/12/04, 4:56 PM20
 
						

							GGT0047-001A-H
COLOUR TELEVISION
MODEL WITH THE TELETEXT FUNCTION
AV-1414FE
AV-2114YE
MODEL WITHOUT THE TELETEXT
FUNCTION
AV-1403AE
AV-1403FE
AV-1404AE
AV-1404FE
AV-14F14
AV-2103CE
AV-2103DE
AV-2103QE
AV-2103TE
AV-2104CE
AV-2104DE
AV-2104QE
AV-2104TE
AV-2104YE
AV-21C14
AV-21E14
AV-21F14
Contents
Knowing your TV’s features..........................
2
Remote control buttons and basic functions.
3
TV buttons and functions..............................
5
Setting up your TV........................................
6
Basic setting for picture.................................
8
Advanced setting for picture.........................
9
Original features for picture...........................
9
Basic setting for sound................................
10
Advanced setting for sound........................
10
Favorite channel and video setting.............
11
Customized setting.....................................
12
TV channel presetting.................................
13
Additional preparation.................................
15
Troubleshooting..........................................
15
Specifications................................
Back cover
INSTRUCTIONS
 GGT0047-001A-H-Cover 5/27/04, 4:35 PM21
 
						

							2
Safety Instructions
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING
RULES REGARDING THE USE OF THIS TV.
1Operate only from the power source indicated on the rear of the TV.
2Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the
mains plug. Do not pull on the power cord.
3Never block or cover the cabinet ventilation
openings. Never install the TV where good
ventilation is unattainable. When installing
this TV, leave spaces for ventilation around the
TV more than the minimum distances as
shown in the diagram.
4Do not allow objects or liquid into the cabinet
openings.
5In the event of a fault, unplug the unit and call a JVC service technician.
Do not attempt to repair it yourself or remove the rear cover.
6The surface of the TV screen is easily damaged. Be very careful with it when handling
the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it
forcefully. Never use any cleaner or detergent on it.
7If you are not going to use this TV for a long period of time, be sure to disconnect the
AC plug from the AC socket.
8The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
15 cm
10 cm
15 cm 10 cm
Knowing your TV’s functions
Main features
Function Description
*TeletextYou can view teletext programmes which are broadcasted by some TV channels.Teletext programme is an information in text form.Favorite CH (Channel)You can register up to four favorite channels for quick re-call with one-press.
AI VolumeTV adjusts automatically the volume to the same level for all TV channels to
avoid sudden change of the volume when selecting different TV channel.
VNRYou can reduce the picture noise when you viewing noisy TV programmes or
video  sources.
White balanceYou can choose one of three tones of white to match to  the video source such
as movie, sports, etc. Changing White balance affects the appearance of all other
colours on the screen.
Child lockTo prevent accidental operation by your children, you can disable the control
buttons on the TV.
* The Teletext function is available for AV-1414FE and AV-2114YE only.
The other models do not have the Teletext function. Please check your TV’s model
number. The model number is indicated at the rear of your TV.
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual
throughly before you begin.
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM2
 
						

							3
3
2
86
7
9
5
1
4
0
1
9
2
3
7
5
0
4
6
8
Remote control buttons and basic functions
RM-C1260WITH THE TELETEXT FUNCTION(AV-1414FE/AV-2114YE)
RM-C1261WITHOUT THE TELETEXT FUNCTION(AV-1403AE/AV-1403FE/AV-1404AE/
AV-1404FE/AV-14F14/AV-2103CE/
AV-2103DE/AV-2103QE/AV-2103TE/
AV-2104CE/AV-2104DE/AV-2104QE/
AV-2104TE/AV-2104YE/AV-21C14/
AV-21E14/AV-21F14)
No. Press To1POWER Turn on or off the TV from standby mode.2MENU/OK Display menu and confirm selected function.35/∞/2/3Select and adjust menu function.4CHANNEL MSelect the desired channel number.5VOLUME MAdjust the volume level.6TV/VIDEO Select TV or VIDEO terminal input.7MUTING Turn off the volume. Press this button again to resume the volume.
8DISPLAY Display the programme number or video terminal number and PR list (channel
list) on the screen. You can select the channel using the PR list.
1Press the DISPLAY button once to display the PR list.
2Press 5/∞/2/3 button to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite
channels are indicated with coloured mark.
90~9, -/-- Select the programme number. For two digits programme number, press -/--,
then press the number button.
0RETURN,a) Return to the frequently view channel with one touch.
1Choose the channel you want to register.
2Press and hold RETURN, button until “RETURN PLUS PROGRAMMED!”
appears.
To cancel, press and hold RETURN, button until “RETURN PLUS CANCELED!”
appears.
b) Return to the previously viewed channel, if you have not set or have
cancelled the Return channel as above.
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM3
 
						

							4
Remote control buttons and basic functions
How to operate menus and menu locations
TO Operation Note
Display the MENU. Press the MENU/OK button 2.To exit the MENU, press the
DISPLAY button 8 or choose EXIT
menu.
Display the top menu. Press 5/∞buttons 3 to choose a menu title. Press ∞ button 3 to display the
Then press MENU/OK button 2.next page for more functions.
Display the 2nd menu. Press 5/∞buttons 3 to choose a menu title.
Then press MENU/OK button 2.
Display the 3rd menu. Press 5/∞buttons 3 to choose a menu title.
Then press MENU/OK button 2.
Return to the previous Press the DISPLAY button 8.–
menu.
Choose the setting of Press 5/∞buttons 3 to choose a function. Press the MENU/OK button 2 to
a function. Then press the 2/3 buttons 3 to change the exit from the menu.
setting.
Adjust the effect level Press 5/∞buttons 3 to choose a function.
of a function. Then press the 2/3 buttons 3 to adjust the
effect level.
Display the sub menu Press 5/∞buttons 3 to choose a function.
of a function. Then press MENU/OK button 2 to display –
the sub menu.
The following chart shows locations of functions in menus.
In this manual, location of a function is described as follows:
MENUTop menu2nd menu
MENUTop menu2nd menu
3rd menu
Note: Some functions have the 4th menus as the sub-menus.
Top menu 2nd menu Location 3rd menu Location
MENU INPUT EXT. INPUT P.12 - -
DISPLAY P.12 - -
PICTURE PICTURE MODE P.8 - -
PICTURE SETTING P.8 - -
WHITE BALANCE P.8 - -
PICTURE FEATURES - VNR P.12
FAVORITE CH SETTING P.11
VIDEO SETTING P.11
COLOUR SYSTEM P.8
PICTURE BOOSTER P.8
SOUND AI VOLUME P.10 - -
FEATURES OFF TIMER P.12 - -
CHILD LOCK P.12 - -
INSTALL AUTO PROGRAM P.13 - -
EDIT/MANUAL P.13 DELETE, MOVE, MANUAL, INSERT P.13
LANGUAGE P.12 LANGUAGE P.12
BLUE BACK P.9 - -
AUTO SHUTOFF P.12 - -
TEXT LANGUAGE P.9 TEXT LANGUAGE P.9
EXIT - - - -
* If you want to
adjust
PICTURE
SETTING
menu, you must
set PICTURE
MODE menu to
USER.
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM4