JVC Dt V20l3d Instructions

INSTRUCTIONS
DT-V24L3D
DT-V20L3D
MULTI FORMAT LCD MONITORTable of Contents
Safety Precautions .............................................. 2
 IMPORTANT SAFEGUARDS ........................... 2
Installation ............................................................ 4
Daily Operations / Connections ......................... 6
 Front panel ....................................................... 6
 Rear panel ........................................................ 8
 Available signals...

2
  Do not install this product in the following places:
– in a damp or dusty room
– where the product is exposed to soot or 
steam, such as near the cooking counter or a 
humidifier 
– near heat sources
– where condensation easily occurs, such as 
near the window
  Do not place this product on an unstable cart, 
stand, or table. The product may fall, causing 
serious injury to a child or adult, and serious 
damage to the product.
 The product should be mounted according to the 
manufacturer’s...

Dear Customer,
This apparatus is in conformance with the valid 
European directives and standards regarding 
electromagnetic compatibility and electrical safety. 
European representative of Victor Company of Japan, 
Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Information for Users on Disposal of Old 
Equipment
[European Union]
This symbol indicates that the 
electrical and electronic equipment 
should not be disposed as general 
household waste at its end-of-...

4Installation
CAUTION
  Do not rest your arm on the monitor or lean against the monitor.
  Do not touch the LCD panel when installing the monitor.
  Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor 
or injury.
You can place the monitor in the following two ways when using it on the supplied stand.
You can tilt the monitor from about 6° upward to 
about 6° downward.
  When the monitor is not tilted (0°), the guidelines 
align as...

5
To adjust the stand heightTo change the stand height, detach the stand from the monitor (☞ “To detach the stand” on page 4). Then, 
change the position of the stand plate according to the stand height you want by choosing the screw holes to use.
Screw holes for higher position Screw holes for lower position
Stand plate
Stand plate
Stand body
Stand body
 
To prevent an accidental fall
Fix the monitor to a wall by using strings.
Fixing the monitor
Attach the hook (not provided) to the VESA mounting holes...

6Daily Operations / Connections 
7 Front panel
p SAFETY MARKER button/lamp
Displays/hides the safety marker.
  Adjust the area of the safety marker in “MARKER” 
of the MAIN MENU (☞ page 11).
  This function does not work when displaying the 
picture in the 1:1 mode.
  This function does not work when “SAFETY 
MARKER” or “R-SAFETY MARKER” is set to 
“OFF” in “MARKER.”
q SCREENS CHECK button/lamp
Displays only the selected element (R, G, or B) of 
the video signal.
  Each time you press this button,...

7
If you press the INPUT SELECT button of the 
current input, the status of the input signal 
and setting of muting are displayed for about 3 
seconds.
  Make the setting to display/hide the status in 
“STATUS DISPLAY” of the “INFORMATION” (☞ 
page 15).
  When “STATUS DISPLAY” is set to “AUTO” or 
“ON,” the status below is also displayed in the 
following cases:
– When you change the input
– When the signal condition of the current input 
changes
– When you turn on the monitor
  When “STATUS DISPLAY”...

8
7 Rear panel
Daily Operations / Connections (cont.)
The illustration of the monitor is of DT-V24L3D.
1 Power switch
Turns the power on or off.
  You need to press 
 button (☞ u on page 
6) to use the monitor after turning on the power 
switch.
2 AC IN terminal
AC power input connector.
Connect the provided AC power cord to an AC 
outlet.
  Attach the provided power cord holder to prevent 
accidental disconnection of the AC power cord (☞ 
on the right).
CAUTION
Do not connect the power cord until all...

9
7 Av ailable signals
The following signals are available for this monitor.
Video signals
No. Signal name Signal format 
shown in the 
status display  (☞  page 7) Input terminal
VIDEO 
(INPUT1,  INPUT2) COMPO./RGB
(Analog 
component/
Analog RGB)*
1
E. AUDIO HD/ SD SDI
(IN 1, IN 2)*
2
D VI-D (HDCP)
(Digital component/ digital RGB)
1 NTSC NTSC √
—— —
2PAL PA L √
—— —
3 B/W50 B/W50 √
—— —
4 B/W60 B/W60 √
—— —
5 480/60i 480/60i — √√ √
6 576/50i 576/50i — √√ √
7 480/60p 480/60p — √
— √
8 576/50p 576/50p — √...

10Menu Configuration—MAIN MENU
PICTURE FUNCTION
Setting for the picture quality
Item To do Setting value
MOVING 
PICTURE*
1Reduce the lag of moving pictures which is peculiar to LCD. OFF, ON
APERTURE 
FREQ.*
2Select the frequency of the luminance signal compensated in 
“APERTURE LEVEL.”OFF, LOW, HIGH
APERTURE 
LEVEL*
2Compensate the frequency response of the luminance signal of the 
video signal.01 – 10
CTI
Adjust the clearness of the outlines of the chrominance signal. OFF, NORMAL, HARD
LT I
Adjust the...