JVC DV Camcorder GY-DV500 Instructions
Here you can view all the pages of manual JVC DV Camcorder GY-DV500 Instructions. The JVC manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
21
2. CONTROLS, INDICATORS AND CONNECTORS
6[CH-2 AUDIO IN] CH-2 audio input connector (XLR
3-pin)
Connect the external audio equipment or microphone to
this connector. Set the CH-2 AUDIO IN LINE/MIC select
switch
9 according to the connected equipment.
The audio signal input through this connector is recorded
on the CH-2 audio channel. To record the audio of this
connector, set the CH-2 AUDIO INPUT switch
8 on page
14 to REAR.
7Back tally lamp
This lamp lights up when the GY-DV500 enters the record...](http://img.usermanuals.tech/thumb/40/60319/w300_JVC_GY-DV500_d-20.png "Page 21
21
2. CONTROLS, INDICATORS AND CONNECTORS
6[CH-2 AUDIO IN] CH-2 audio input connector (XLR
3-pin)
Connect the external audio equipment or microphone to
this connector. Set the CH-2 AUDIO IN LINE/MIC select
switch
9 according to the connected equipment.
The audio signal input through this connector is recorded
on the CH-2 audio channel. To record the audio of this
connector, set the CH-2 AUDIO INPUT switch
8 on page
14 to REAR.
7Back tally lamp
This lamp lights up when the GY-DV500 enters the record...")
21 2. CONTROLS, INDICATORS AND CONNECTORS 6[CH-2 AUDIO IN] CH-2 audio input connector (XLR 3-pin) Connect the external audio equipment or microphone to this connector. Set the CH-2 AUDIO IN LINE/MIC select switch 9 according to the connected equipment. The audio signal input through this connector is recorded on the CH-2 audio channel. To record the audio of this connector, set the CH-2 AUDIO INPUT switch 8 on page 14 to REAR. 7Back tally lamp This lamp lights up when the GY-DV500 enters the record...
Page 22
22 2. CONTROLS, INDICATORS AND CONNECTORS Remaining Tape Time Display This display shows the remaining tape time (minutes/seconds) in record and play modes. ¥ Example: 30 minutes of remaining tape. ¥ This indicator blinks when remaining tape time is equivalent to less than 2 minutes. * An alarm sounds as a warning when remaining tape time is equivalent to less than 2 minutes in the record mode ¥ The following display appears when no videocassette is loaded or during the calculation of remaining tape...
Page 23
![Page 23
23
2. CONTROLS, INDICATORS AND CONNECTORS
7IRIS mode switch
A: Activates the auto iris feature.
M: Allows manual iris control.
8Momentary auto iris button
When the IRIS MODE switch
7 is at M, pushing this button
activates the Auto Iris Function while it is held down only.
9[S] IRIS speed adjusting control
For adjusting the iris operation speed.
0FILTER thread
Protect the lens with a clear filter or UV filter by screwing
the filter onto the thread inside the lens hood from the front.
Other filters can be...](http://img.usermanuals.tech/thumb/40/60319/w300_JVC_GY-DV500_d-22.png "Page 23
23
2. CONTROLS, INDICATORS AND CONNECTORS
7IRIS mode switch
A: Activates the auto iris feature.
M: Allows manual iris control.
8Momentary auto iris button
When the IRIS MODE switch
7 is at M, pushing this button
activates the Auto Iris Function while it is held down only.
9[S] IRIS speed adjusting control
For adjusting the iris operation speed.
0FILTER thread
Protect the lens with a clear filter or UV filter by screwing
the filter onto the thread inside the lens hood from the front.
Other filters can be...")
23 2. CONTROLS, INDICATORS AND CONNECTORS 7IRIS mode switch A: Activates the auto iris feature. M: Allows manual iris control. 8Momentary auto iris button When the IRIS MODE switch 7 is at M, pushing this button activates the Auto Iris Function while it is held down only. 9[S] IRIS speed adjusting control For adjusting the iris operation speed. 0FILTER thread Protect the lens with a clear filter or UV filter by screwing the filter onto the thread inside the lens hood from the front. Other filters can be...
Page 24
![Page 24
24
2. CONTROLS, INDICATORS AND CONNECTORS
1Stopper screw
This screw prevents the viewfinder from coming off the
camera.
2Mounting guide
To attach on the camera.
3Connector
Connect to the camera.
4[CONT] contrast adjustment
To adjust the contours of the viewfinder image.
5[BRIGHT] brightness adjustment
To adjust the brightness of the viewfinder.
6[TALLY] switch
Set this switch to OFF to prevent the tally light
7 from turning
on and informing people that they are being recorded.
However, the REC indicator...](http://img.usermanuals.tech/thumb/40/60319/w300_JVC_GY-DV500_d-23.png "Page 24
24
2. CONTROLS, INDICATORS AND CONNECTORS
1Stopper screw
This screw prevents the viewfinder from coming off the
camera.
2Mounting guide
To attach on the camera.
3Connector
Connect to the camera.
4[CONT] contrast adjustment
To adjust the contours of the viewfinder image.
5[BRIGHT] brightness adjustment
To adjust the brightness of the viewfinder.
6[TALLY] switch
Set this switch to OFF to prevent the tally light
7 from turning
on and informing people that they are being recorded.
However, the REC indicator...")
24 2. CONTROLS, INDICATORS AND CONNECTORS 1Stopper screw This screw prevents the viewfinder from coming off the camera. 2Mounting guide To attach on the camera. 3Connector Connect to the camera. 4[CONT] contrast adjustment To adjust the contours of the viewfinder image. 5[BRIGHT] brightness adjustment To adjust the brightness of the viewfinder. 6[TALLY] switch Set this switch to OFF to prevent the tally light 7 from turning on and informing people that they are being recorded. However, the REC indicator...
Page 25
25 2. CONTROLS, INDICATORS AND CONNECTORS BATT ALARMREC BATT LampREC/ALARM Lamp ACCU - FOCUS G F I SD BACCU M909 -FOCUS G F I F5.6 STBY 4V2 1.
Page 26
26 2. CONTROLS, INDICATORS AND CONNECTORS 1 72 3 4 5 6 C 8 7 9 0A B 1 2 3 4 5 6SCENE F I L E WH I T E B A L AA FILTER SHUTTER 1/103.2K 00 GA I N 6 d B I R I S L E V E L NORMA L I R I S D E T E C T NORMA L FU L L AUTO OF F REC T I ME < 6 0ACCU - FOCUS G F I B SD ACCU - FOCUS G F I F5.6 STBY 4V2 1.
Page 27
27 2. CONTROLS, INDICATORS AND CONNECTORS c Status 1 In addition to the information on the Status 0 screen, this screen displays audio indicators and information on remaining tape, voltage and lens F-number. 2-9 Indications in Viewfinder (Contd) Indication Indication Contents SCENE FILE A, B, OFF WHITE BAL A, B, PRESET, FAW FILTER 3.2K, 5.6K, 5.6K+ND SHUTTER OFF, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/60.1 to 1/2084.6 (in VARIABLE mode), EEI (in ALC mode) GAIN -3dB, 0dB, 6dB, 9dB, 12dB, 18dB, LOLUX,...
Page 28
28 2. CONTROLS, INDICATORS AND CONNECTORS Alarm message display ACCU - FOCUS G F I F5.6 STBY 4V2 1.
Page 29
29 2. CONTROLS, INDICATORS AND CONNECTORS OFF ZONE 1 ZONE 3ZONE 2 -- - - - CAMERA MENU - SCENE F I L E : A VF D I SPLAY MENU OP E R A T I ON ME NU P ROC E S S ME NU F I L E MANAGE SETUP MENU EX I T AUTO WH AITE OP E R A T I ON SHUT T ER 1 / 1 0 0 0 n Safety Zone Three types of safety zone items can be displayed in the viewfinder. Select the required one with the SAFETY ZONE item on the VF DISPLAY menu screen. n Setting the Screen Display n Auto White Balance Display n Shutter Speed Display Screen used...
Page 30
30 3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS For information on connection with the individual attachments, refer to the page explaining the respective connection methods. 3-1 Basic System VC-710 ( 5m) ( NB-G1 BATTERY CHARGER) AC POWER ADAPTER AA-P250 EARPHONE VIDEO LIGHT(ANTON BAUER. PROTEC) SHOULDER BELTVIEWFINDER VF-P400 VF HOLDER TP-P300 TP-P205DOLLYTRIPOD BASE KA-510 NB-G1 ( 4PACK) BATTERY CHARGER(AC POWER ADAPTER) AA-G10(B) BATTERY NP-1B TYPE BATTERY NP-1B TYPEBATTERY CHARGER BATTERY NB-G1...