JVC Lt 32ex18 Instructions

							
WIDE LCD PANEL TV
INSTRUCTIONS
LT - 32EX18
LT - 42EX18
GGT0211-001A-H
Safety precautions ...............................2
Remote control buttons and functions ...3
Set up and connections .......................4
Initial settings .......................................6
Registering / Editing channels .............6
PREPARATION
Picture setting ......................................7
Sound setting ......................................9
Useful functions .................................10
Viewing Teletext .................................12
Watching Video or DVDs ...................12
Troubleshooting .................................13
Technical information .........................14
CH/CC List .........................................15
Specification ......................................16
FUNCTIONS
REFERENCE
Contents
ENGLISH 
HIGH-DEFINITION MULTIMEDIA INTERFACE
     
						

							
2
JVC
•  Follow this manual regarding setup!  - Connect only to a 110-240 V, 50/60Hz AC outlet.
•  Make enough room for inserting and removing the power plug! 
•  Place the TV as close to the outlet as possible!  - The main power supply for this TV is controlled by inserting or removing the power plug.
•  Never cut or damage the power cord!  - If the AC plug is not the right shape, or the power cord is not long enough, use an appropriate plug adapter or extension cable. (Consult your retailer.)
•  Unplug the power cord when going out! - The power buttons on the remote control and the TV unit cannot completely     turn off the TV. (Make     appropriate     arrangements for     bedridden people.)
Thank you for buying this JVC LCD panel television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
•  Do not allow the TV to fall!
 - Do not rest your elbows on, or 
allow children to hang from the TV.
  -  There is a risk that the TV will fall 
and cause injuries .
•   Never dismantle the rear panel!  -  It many cause an electric shock.
•   Never obstruct the ventilation holes !  -  It may cause overheating or a fire.
•   Handle LCD panel with care!  -  Use a soft, dry cloth when cleaning.
• For more details on installation, usage and safety ➡ Consult your retailer.
•  Never place anything on the TV! - Placing liquid, naked flames, cloths,     paper, etc. on the TV may cause a fire.•  Never expose to rain or moisture!  -  To prevent fire or electric shock, never     allow liquids to enter the unit.•  Never insert objects into the cabinet   openings !  -  It many cause a fatal electric shock.  -  Take care when children are near.
If the TV is damagedor behaving strangely, stopusing it at once!➡ Unplug the power cordand contact your retailer.•  Hold the TV so as not to scratch the screen!  -  Do not touch the screen when carrying the TV.•  Do not carry the TV on your own!  -  In order to prevent accidents, ensure that the TV is carried by two or more people.•  When attaching the TV to the wall, use the optional JVC wall mounting unit! - Consult a qualified technician.  - See the included manual on mounting procedures.  - JVC assumes no responsibility for damage due to improper mounting.•  Never listen to headphones at high volume!  - It may damage your hearing.
Never try repair the TV yourself!
➡  If the problem cannot be solved in “Troubleshooting” 
    (P.13), unplug the power cord and contact your retailer.
                                                                                                      
						

							
3
RM-C2020LCD
DISPLAY
CHANNELVOLUMEMODE
BACK
Z O O ME C O
M E N U
T V / V I D E O R E T U R N
+
C l e a r   S D132
465
798
0
OK
OK 16:9 Zoom
Remote control buttons and functions
•  Insert the batteries  Use two “AAA/R03” dry   cell batteries. Insert the   batteries from the · end,   making sure the · and  ª polarities are correct.
“AAA/R03” Batteries
Turn the volume off/onChange channel/page
RETURN PLUS functionReturn to the frequently viewed channel.
Choose the channel you want to programme
Return PlusProgrammed!
Return PlusCanceled!
To cancel
RETURN functionIf you have not set or have canceled the RETURN PLUSchannel, this will return to the previously viewed channel.
Channel selectionSelect the desired channel number.For Hyper ScanPR changes without changing the picture. Once you stop pressing CHANNEL+ or CHANNEL - button, picture will change to the desired PR.
Press and hold
Press and hold
Press and hold
CHANNEL
Select TV or Video input
Channel information
RETURN +
RETURN +
Turn the TV on from standby
Colour button
Turn on “Clear SD”
Turn on “Cinema Surround”
Turn on “Eco Mode”
To Teletext (P. 12)
Display on-screen menu
Operate the menuTo previous screen
Adjust the volume, Turn off muting
View the Teletext (P. 12)
Change the aspect ratio (P. 8)
1. Select
2. Set
Favourite channel setting. (P. 11)1. Register the favourite channel
2. Recall the favourite channel
  •  If the favourite channel has not been registed    then “No Memory” will be displayed.
will be displayed.Programmed!
Press and hold
Press
 Set 1-4 ?
 Favourite 1-4 ?
Press numberbutton (1-4 only)
Press numberbutton (1-4 only)
 Auto
 16:9 Zoom
 Full
 Regular
 14:9 Zoom  PanoramicZoomPanoramic
Move the picture with 5 or ∞ while this bar is displayed.
V-Scroll
 
						

							
4
Set up and connections
TV/VIDEOMENU/OK
CHANNEL
VOLUME
150mm 50mm 150mm
200mm
50mm
VIDEO-2RLV
12
Care when setting
Power lamp  ON  : Lit (Blue)  OFF : Unlit    Power lamp lights    while the TV is on.     • “Power Lamp” (P. 11)Remote control sensor
Switch betweenTV / VIDEO devicesDisplay on-screen menu / set
Change channel / Page /Hyper Scan Function (P. 3)
Volume / Adjust
Power On / Off
To Headphone (P. 5)
■  Power requirements• Connect the power cord only to a 110-240V, 50/60Hz AC outlet.■  When attaching the TV to the wall, use the optional JVC wall  mounting unit• Consult a qualified technician.• JVC assumes no responsibility for damage due to improper mounting.• 200mm x 200mm mount which conforms to VESA standards.■  Installation requirements• To avoid overheating, ensure the unit has ample room.
•  After all the connections have been made, insert the plug into an AC outlet.
Connect an aerial and VCR / DVD PlayerAERIAL
OR
VCR (DVD Player)
-  If you have any problem with assembly, please contact a retailer or a dealership.Note: 4 screws included.
Stand Assembly-  Insert the stand into the panel at the position where the screw holes are, and fasten the screws.
 
						

							
5
Set up and connections (continued)
OUTPUT
VIDEO-2
VIDEO-1
PCPC AUDIO
HDMI-1( DVI ANALOG AUDIO )
RLV
RL
R
L
V
PrPbY
PC IN(D-SUB)
RLVJVC
(L)(R)
HDMI-1 HDMI-2DIGITAL VIDEO/AUDIO
VIDEO-1RLV
Pr PbYVIDEO-1RLV
Pr PbY
JVC
You can connect many different devices to the rear panel of the TV.Please read the user manuals of each device before setup.(Connecting cables are not supplied with this TV.)
DVD player(HDMI compatible)DVD player(HDMI compatible)
To “HDMI-1”
Component input
DVD Player
Game consolesVideo cameraTo VIDEO-2
PC
VCR / DVD recorder
Amplifier
VIDEO-1 Watching videos
Output  Input
·  Composite signal / Component signal (P. 16)·  Sound L / R
·  Use Component signal  “Video - 1 setting” (P. 12)
VIDEO-2 Watching videos
Output  Input
·  Composite signal·  Sound L / R
HDMI-1 ConnectingHDMI-2 HDMI devices
Output  Input
·  HDMI signal (P. 16)
·  “HDMI setting” (P. 12)·  HDMI-2 input does not support analogue audio.·  Connect a “DVI” device to “HDMI-1” (P. 14)
OUT-  Video and sound signal of a TV channel you are viewing outputs from this terminal.
Output  
·  Composite Signal·  Sound L/R
Headphone
Composite input
GameVideo
VCR
To “HDMI-2”
•  Check for PC compatibility.  “PC signals that can be displayed” (P. 14)
 
						

							
6
OK
Manual
Insert/Delete
ID
Move
Initial SettingsRegistering / Editing channels
OK
OK
OK
OK
OK
OK
OK
Language>English
������� Castellano
Melayu
Français
ไทย
����������
Tieáng Vieät
Teletext Language>Group-1
Group-2
Group-3
Group-4 Group-5
Group-6
Auto Program>CH 09
12%
Edit>PRID01
0507081009
06
02CH07CH76CH12CH09
CH02CH03CH/CC
CH05CH02CH15CH28
0403
Edit>PRID01CH/CC
0507081009
06
0203CH07CH76
CH02CH03
CH12CH09CH05CH02CH15CH28
04
Edit>PRID01
0507081009
06
0204ABCDE03A
CH/CC
CH07CH76
CH02CH03
CH12CH09CH05CH02CH15CH28
Edit>PRID01
0507081009
06
0204ABCD03A
CH/CC
CH07CH76
CH02CH03
CH12CH09CH05CH02CH15CH28
Edit>PRID01
0507081009
06
0204ABCD03BBC
CH/CC
CHCH76
CH02CH03
CH12CH09CH05CH02CH15CH28
**
Manual>PRID01
0507081009
06
02CH07(B/G)CH76CH12CH09
CH02CH03CH/CC
CH05CH02CH15CH28
04ABCD03BBC
OK
OK
OK
Edit>PRID01CH/CC
0507081009
06
0203CH07CH76
CH02CH03
CH12CH09CH05CH02CH15CH28
04
1 Turn on the TV•  Show only when powering on for the first time.•  The power on the unit can also be used.
2Select a language
3Select the teletext language group
•  See “Language group for teletext” (P. 14)
4Automatically register channels (Auto Program)
5Check what was registered
1. Select
2. Set
Select
You can edit the channel list or register new channel manually.
Select a channel
1. Start
2. MoveFinish
1. Select the character2. Move to the next column
3. Set
1. Select a  CH/CC2. Enter a number 0-9 button then, receives the broadcast signal.
2. Set
•  Channel fine tunning ➡ (Yellow) / (Blue)
•  If the picture or sound is unnatural ➡  for select a system.
 (Red) or (Green)
From highfrequenciesFrom lowfrequencies
Register a new channel
Insert / Delete a channel
Edit a channel name
Move a channel position
(Green)
(Red)
(Blue)
JVC logo appears
•  Delete a channel by press (Yellow) button.
1. Beginning channel search
•  “CH/CC List” (P. 15)
•  If you want to edit channel, read the next column.
 
						

							
7
Picture setting
OKOKOK
1. Display “Picture” menu2. Select item and setting or adjust
PicturePictureMode
SharpColourTintWhiteBalanceFeatures
BackLight
BrightContrast
Picture>
>
>Bright
Cool
• To enter an items menu
MENU
Picture Mode
You can select a preset picture setting according to you favour.
 
Bright  :  Hightens contrast and sharpness.
Standard :  Standardize picture adjustment.
Soft  :  Softens contrast and sharpness.
Back LightYou can change the backlight brightness.  Darker  Brighter
ContrastYou can change the contrast of the picture.  Lower  Higher
BrightYou can change the brightness of the picture.  Darker  Brighter
SharpYou can change the sharpness of the picture.  Softer  Sharper
ColourYou can change the colour of the picture.  Lighter  Deeper
TintYou can change tint only in NTSC.  Reddish  Greenish 
White Balance
You can change the white balance of the picture to better match the type of video being view.
 
Cool  :  Bluish white colour.
Warm  :  Reddish white colour.
Mid  :  Normal white colour.
1. Select
2. Enter
1. Select
3. Finish
1. Select
2. Enter
2. Adjust
 
						

							
8
Picture setting (continued)
16 : 94 : 314 : 9
PanoramicRegular/Slim14:9 ZoomAuto
16:9ZoomFull
Regular
14:9Zoom
Panoramic
Zoom>>>>Panoramic
ClearSD
ColourManagementPictureManagementColourSystemZoom
DigitalVNR
PullDownDigiPure
Features>
>>
>>offoffoffoffoffoff
•  When 720p or 1080i or 1080p signal is received, “Full” and “Slim” can be selected.•  In PC mode, “Regular” and “Full” can be selected.
Features
Finer Picture adjustment
Clear SD:  For clearly picture (Off / Mode-1 / Mode-2)  When Clear SD set to Mode-1 or Mode-2, then Digital VNR and DigiPure and Picture      Management cannot operate.
Digital VNR:  Reduce the amount of noise in original picture. (Off / On)
DigiPure:  For natural - looking outlines (Off / On)
Pull Down:  For smooth cinema film (Auto / Off / On)
Colour Management:  For natural - looking pictures (Off / On)
Picture Management:  Fix bright / dark pictures. (Off / On)
Colour system: When there is no colour, change the colour system. (PAL / SECAM / NTSC 3.58 / NTSC 4.43 / AUTO)
Zoom:  Change the aspect ratio.
 
						

							
9
Sound setting
OK
1. Select
2. Enter
OK
1. Select      “Set Up”
2. Enter
OK
1. Select “AI Volume”
2. Adjust to On/Off
Sound
Set Up
 Video-1 SettingVideo
 Al Volume  On
 Appearance                       Size-1
 Teletext Language 
 HDMI Setting
 PC Setting  Edit / Manual
 Language
>>>
>
>
>>
>
Auto ProgramSet Up
Stereo/I-
CinemaSurroundOff
Bass
BalanceTreble
Sound>>I IIMonoII
OK
1. Select
3. Finish
2. Adjust
Stereo / I-IISelect the stereo, mono or bilingual language (O : Mono / m : Stereo / I : SUB1 / II : SUB2 / Mono)
BassLow tones (Weaker  Stronge)
TrebleHigh tones (Weaker  Stronge)
BalanceSpeaker balance (Left Stronger  Right Stronger)
Cinema SurroundAmbient sound
High  Low  Mono  Off
AI Volume1. Display “Set Up” menu.
Prevent suddenincrease or decreaseof sound whenchanging channels.
MENU
MENU
1. Display “Sound” menu.2. Select item and setting or adjust.
• Prevent the sudden change of sound.
2. Select “Al Volume”
 
						

							
10
Useful functions
OK
1. Select
2. Enter
FeaturesOffOff
Features>
>
 On Timer>
Off Off
Off
Child Lock
Auto Shutoff
Favourite Setting 
Eco Mode Sleep Timer
Blue Back Channel Guard
Power Lamp
OK
1. Select PR  channel
2. Set
OK
1. Select   “On Timer”OK
3. Set
OK
1. Select a time in minutes
2. Set
OK
1. Select   a numberOK
1. Select a  channel
Features>> PR                                        02 
 On Timer                          00  :  00On Timer>>>
9
1
7
23
456
8
0
SleepTimer>
Off0120>>
Set ID No.>
0    0    0    0PRIDCH/CC01
0507081009
06
02CH07CH76CH12
CH02CH03
CH09CH05CH02CH15CH28
04ABCD03BBC
ChannelGuard>>
2. Select item
2. To the next  column3. Enter
(Blue)Lock / Release
0
OK
• To enter an items menu
1. Select
2. Enter
OK
1. Select
3. Finish
2. Adjust
On Timer
TV to turn on automatically fromstandby mode ata set channeland time.
Sleep Timer
TV to turn offautomatically tostandby mode aftera set time.
Channel Guard
Stop children fromwatching specificchannels.
MENU
1. Display “Features” menu.2. Select item and setting or adjust.
1. Select PR channel that you want to watch.2. Set the On time to your desired period at time.
1. Select “Channel Guard”
Note : Press (Blue)  for reset time setting.
•  View a locked channel by use the numerical buttons to enter the channel number. When  appears, press “DISPLAY” button and enter your “ID No.”
2. Select a channel and lock it (  : locked )
Note :  When the remaining elapse is one minute, “Good Night!” appears on the screen.