JVC Projector Dla Hd1 Instructions Manual

31
Preparation Basic OperationSettingsTroubleshooting Others Getting Started
ENGLISH
zAContrastB, ABrightnessB, AColorB, ASharpnessB, ADNRB, AColor Temp.B, AGammaB and AOffsetB are registered in AImage 
ProfileB.
zThe display position value varies with the input signal.
zThis setting is available only when projecting the HDMI input.
zMasking is available only when high definition images are input.
zThis setting is available only when projecting the component video input.
Setup>Profile Memory
LProfile...

4
32
Setting Menu (Continued)
Settings
z
This setting is available only when projecting the HDMI input.
zWhen high definition images are input, the screen size is fixed at A16:9B.
zThis setting can also be configured from the remote control. (pP16, 26)
zThis setting is available only when projecting the video or S-video input.
zThis setting can only be adjusted when NTSC signals are input to the video or S-video input terminal.
Video>HDMI
QHDMI
Configures the input signals of the HDMI input terminal....

33
Preparation Basic OperationSettingsTroubleshooting Others Getting Started
ENGLISH
Install.>Menu Position
VMenu Position
Sets the display position of the menu.
Upper leftDisplays menu on the upper left of the screen.
Upper centerDisplays menu on the upper center of the screen.
Upper rightDisplays menu on the upper right of the screen.
Left centerDisplays menu on the left center of the screen.
CenterDisplays menu on the center of the screen.
Right centerDisplays menu on the right center of the screen....

4
34
Setting Menu (Continued)
Settings
z
Changing the lamp power will not change the lamp time (lamp life).
zThe setting cannot be changed within approximately 90 seconds after this unit has been turned on.
zSettings cannot be changed within approximately 60 seconds after they are made.
zThis can also be displayed from the remote control. (pP16)
Install.>High Altitude Mode
aHigh Altitude Mode
Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea...

35
Preparation Basic OperationSettingsTroubleshooting Others Getting Started
ENGLISH
zThis can also be displayed from the remote control. (pP16)
Func.>Language
gLanguage
Sets the language of the menu display.
ÔŠ Japanese
EnglishEnglish
DeutschGerman
EspañolSpanish
ItalianoItalian
FrançaisFrench
PortuguêsPortuguese
NederlandsDutch
SvenskaSwedish
NorskNorwegian
¤Chinese (Simplified)
Info.
hInput
Displays the currently selected video input.
iSource
Displays the types of the current input video...

36
4Settings
Customizing Projected Images
AContrastB, ABrightnessB, AColorB, ASharpnessB, ADNRB, AColor Temp.B, AGammaB 
and AOffsetB are registered in the image profile.
ASelect the image profile
BAdjust image quality
Example: To adjust AContrastB
aSelect AImageB g AImage AdjustB
bAdjust the setting
COther items can also be adjusted
DTo end
You can adjust the projected image to a desired image quality and register the adjusted value. (Image profile)
Besides the default ACinemaB, ANaturalB and ADynamicB...

37
Preparation Basic OperationSettingsTroubleshooting Others Getting Started
ENGLISH
ASelect the image profile
BAdjust image quality
CRegister the image profile
aSelect ASetupB g AProfile MemoryB
bRegister the setting
DTo end
Registering User-defined Image Profiles
zSee AChanging the Default Image Profile ValuesB for procedures on 
adjusting the image quality. (pP36)
zTo return to the default values, reset the registered settings with AProfile 
MemoryB in the setting menu. (pP31 - L)
zAdjustment settings...

5
38
Troubleshooting
Troubleshooting
Before sending the unit to your authorized dealer for repair, check the following points.
The following situations are not malfunctions.
„
You do not need to worry under the following situations if there is no abnormality on the screen.
zPart of the top surface or front of the unit is hot.
zA creaking sound is heard from the unit.
zAn operating sound is heard from the internal of the unit.
zRunning colors occur for some screens.
„Perform the following operations when...

39
Getting Started Preparation Basic Operation SettingsTroubleshootingOthers
ENGLISH
Video image is fuzzy
Is the focus correctly adjusted?Adjust accordingly using the focus adjustment ring.pP25
Is the unit placed too near or too far away 
from the screen?Set the unit at a correct distance from the screen.pP22, 23
Video images are missing
Has setting been performed for screen 
mask?Set the AMaskB in the setting menu to AOffB.pP27, 31-O
Is the display out of position?Alter the APicture PositionB value in...

5
40
Troubleshooting
What to Do When These Messages 
Are Displayed
MessageCause (Details)
No device is connected to the input terminal.
The input terminal is connected but there is no signal.
gInput the video signals.
A video signal that cannot be used in this unit has been input.
gInput video signals that can be used.
The message is displayed when the accumulated lamp time has exceeded 
1900 hours.
To clear the message, press the [EXIT] button.
gGet ready a new lamp unit and replace as soon as...