JVC Projector Dla Hd10ku Instructions Manual

21
Adjust the distance from the lens to the screen to achieve your desired screen size.
oDLA-HD10KSU/E
DLA-HD10KSU/E uses a 1.4x power zoom lens for projection, so when expanded to the maximum it can project at 1.4 
times the size of the minimum.
oDLA-HD10KU/E
DLA-HD10KU/E uses a 1.9x power zoom lens for projection, so when expanded to the maximum it can project at 1.9 
times the size of the minimum.
Relationship Between Projection Distance and Projection Screen Size
Screen Size and Projection Distance...

Installing the Projector (continued)
22
This unit comes with a Lens Shift feature that enables upward/downward adjustment of the projection screen position. 
Adjust accordingly depending on the installation conditions.
●The shift level is between 0 % and 60 %. The shift level is set to 50 % as the default.
●The position of the projection screen may be out of alignment due to the gear movement.
●When lens shift setting (adjustment) is completed, mount the lens shift cover to this unit.
aProject the image...

23
The operable distance of the remote control unit is about 7 m for direct reception. The remote control unit can be used 
by having the transmission signal reflected off a screen.
●If the fluorescent lamp is lit, the remote control unit might not function properly.
When reflecting off a screen
Ensure that total of distance A between this unit and screen and distance B between remote control and screen is 
within 7 m.
●As the effect of signals reflected from the remote control unit differ with the type...

24
Connecting to Various Devices
Before connection, be sure to turn off both the projector and the device to be connected.
●Read the manual that is supplied with the device to be 
connected thoroughly.
Connecting to Devices
●Depending on your DVI-D cable, the signal may attenuate and the image become unstable.
●When using a DVI-D cable longer than 5 m, the use of a split system or optical fiber cable is recommended.
●Video signals that can be input to this unit are 1080/50p and 1080/60p signals for...

25
aConnect the supplied power cord to the power input 
terminal of this unit
bConnect the earth wire to the earth terminal 
available in the building, followed by inserting the 
main plug of the supplied power cord into the wall 
outlet
Connecting the Power Cord (Supplied)
Before plugging in the power cord, ensure that all devices have been connected.
a
b
Power Cord
(Supplied)
Cautions Against Fire and Electric Shock
●Since the power consumption of this unit is high, insert the power plug directly into...

26
Basic Operation Procedures
aRemoving the lens cap
●Upon using, mount the lens cap to prevent soiling of the lens.
bTurning on the power
AInsert the power plug to the power outlet
●The main power turns on and the [STAND BY] indicator on the unit 
lights up.
BPress the [OPERATE ON] button for 1 second or more
●The [OPERATE] indicator on this unit lights up and the projected 
image slowly appears.
cAdjusting zoom (screen size)
To enlarge the screen size, press the [ZOOM T] button
To reduce the screen...

27
dAdjusting focus
To focus on nearer points, press the [FOCUS +] button
To focus on farther points, press the [FOCUS-] button
eHiding the image temporarily
Press the [HIDE] button
●The displayed image will disappear.
●Press the [HIDE] button again the restore the image.
fTurning off the power
APress the [OPERATE OFF] button for 1 second or more
●The [OPERATE] indicator turns off, the [STAND BY] indicator starts 
blinking and this unit switches to the cool down mode. The cool down 
mode will last for...

28
Adjustments and Settings Using Menus
The menus displayed on the screen are used to perform adjustment and setting for this unit.
The menus of this unit have the following structure. Characters on the screen are displayed in English only.
*1Press the [ENTER] button to switch to the test pattern image. There are 10 types of test patterns. Press the [ENTER] 
or [TEST] button to alter the test pattern to be projected. Press the [EXIT] button to clear the menu screen. Press the 
[EXIT] button again to...

29
Menu Operation Buttons
The menus are operated using buttons on this unit or remote control unit.
ON
ENTER
OFF
CHPTEST
MENUEXIT
LIGHT
OPERATE
HIDEPRESET
ZOOM
T
WFOCUS
T
W
ZOOM
+
-
FOCUS
MENUEXITOPERATE
ON
OPERATE
OFF
HIDE RS232C Rx
Tx
Menu 
Operation 
Buttons
Menu Operation Buttons
Button
Function
Remote 
Control UnitThis Unit
Displays the main menu.
●Press to clear the menu screen 
when the menu is displayed.
Confirms the selected item on the 
main menu.
●Press the [ENTER] button when 
the ATest...

Adjustments and Settings Using Menus (continued)
30
aPress the [MENU] button
●The main menu is displayed on the screen.
bPress the [J/K] buttons to select a main menu item 
and press the [ENTER] button to confirm
●The AInformationB menu does not have a setting menu (submenu).
cPress the [J/K] buttons to select an adjustment 
item and press the [H/I] buttons to change the 
setting value
dAfter setting is completed, press the [EXIT] button
●Each time you press the button, the menu returns to the previous...