Home > JVC > Monitor > JVC Tm H1700g Instructions

JVC Tm H1700g Instructions

Here you can view all the pages of manual JVC Tm H1700g Instructions. The JVC manuals for Monitor are available online for free. You can easily download all the documents as PDF.

Page 11

ENGLISH
EXIT
CHROMA MENU
PHASE BRIGHTCONTRAST VOLUME/SELECT
                    4SHARPNESS :  00
ADJ. BAR POSI. :LOWERCOLOR TEMP. : 6500
COLOR SYSTEM : AUTO
RUSH DELAY : STD.
ASPECT RATIO : 4-3
Menu items Purpose  Setting range
SHARPNESS Picture sharpness
ADJ.BAR POSI Volume bar position
COLOR TEMP. Color temperature of white
balance
COLOR SYSTEM Color system
RUSH DELAY Delay value
ASPECT RATIO Aspect ratio
Front panel Function                     
Contentsbutton displayed
+Increase (to max. value)...

Page 12

HOW TO USE THE MENU
FUNCTIONS 
(cont’d)
10
EXIT
CHROMA MENU
PHASE BRIGHTCONTRAST VOLUME/SELECT
DISPLAY AND SELECTIONS IN THE  MODE (SETTING)
•PICTURE SUB ADJ. • WHITE BALANCE • REMOTE SYSTEM
•H. POSITION • CONTROL  LOCK • INPUT  REMOTE
•V. POSITION • STATUS DISPLAY
You can set the following set-up menu items.
1. While pressing the MENU button, press the
CHROMA/PHASE button.
The  screen is displayed.
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select the desired menu item.
A selection mark (4)...

Page 13

ENGLISH
4. To set the other set-up menu items, repeat the
procedures 2 and 3.
5. Press the MENU button to quit.
Notes:
●When the CONTROL LOCK function
is set to ON, pressing operation
buttons on the front panel will display
the message “CONTROL LOCK ON!”
on the screen for about 3 seconds.
●The CONTROL LOCK function is
maintained even when the power is
turned off.
●To turn off the CONTROL LOCK
function, while holding the MENU
button press the CHROMA/PHASE
button. Then set the CONTROL
LOCK function to...

Page 14

12
Functions (Items)Initialization(setting)
SHARPNESS 00
ADJ. BAR POSI LOWER
COLOR TEMP 6500
COLOR SYSTEMAUTO
RUSH DELAY STD.
ASPECT RATIO 4 – 3
PICTURE SUB ADJ.
CONTRAST 00
BRIGHT 00
CHROMA 00
PHASE 00
H. POSITION 00
V. POSITION 00
WHITE BALANCE
         R. CUT OFF 00
G. CUT OFF 00
B. CUT OFF 00
R. DRIVE 00
B. DRIVE 00
CONTROL LOCK OFF
STATUS DISPLAY ON
REMOTE SYSTEM MAKE
INPUT REMOTE A – B
CHROMA 00
PHASE 00
CONTRAST 00
BRIGHT 00
VOLUME 20
 RESET
             Are   you     sure ?
“Yes”  then   
“No”...

Page 15

ENGLISH
VIDEO A
AUDIO A
AUDIO B VIDEO B
IN OUT
IN
ININOUT
OUT
INOUT
Y/C
OUT
BASIC CONNECTION EXAMPLE
Notes:
•
 Before connecting your system, make sure that all units are turned off.• The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected.
Be sure to refer to the instructions provided with the unit(s) you are connecting.
• Each pair of input (IN) and output (OUT) terminals are bridge-connected.• If you’re not connecting...

Page 16

VIDEO B (Y/C) Connection Example (Select Input B (Y/C))
VIDEO A
AUDIO A
AUDIO B VIDEO B
IN OUT
IN
ININOUT
OUT
INOUT
Y/C
OUT
Video Camera
Video Monitor
VCRY/C (S-video)
(Y/C (S-video) signal cable)
Audio
(Audio signal cable)
Audio
(Audio signal cable)
Y/C (S-video)
(Y/C (S-video) signal cable)
Video MonitorVCR
BASIC CONNECTION EXAMPLE
(cont’d)
: Signal Flow
14
LCT1092-003A-H[EN]3.p6507.11.8, 4:49 PM 16
 

Page 17

ENGLISH
HOW TO USE EXTERNAL
CONTROL
ABOUT EXTERNAL CONTROL
This monitor is provided with an external control terminal. MAKE (make contact) or TRIG. (trigger) system can be selected by the
setting of REMOTE SYSTEM in the .
MAKE (make contact system) : The function is controlled by short-circuiting or disconnecting each control terminal with pin 15
(GND).
TRG. (trigger system) : The function is controlled by short-circuiting with pulses (for about 1 second) (short-circuit/open
with the 15th pin GND).
*...

Page 18

Problems
No power supply.
No picture with the
power on.
No sound.
Shaking picture.
No colors, wrong
color, or dark picture.
Unnatural, irregularly
colored, or distorted
picture.
Dark stripes appear
at the top and bottom
of the screen, picture
vertically squeezed.
The overall picture
size is too small.
Function buttons on
the front panel do not
function.
The INPUT SELECT
buttons do not
function.
Points to be checked
Is the power plug loosened or disconnected?
Is the main power turned OFF?
Is the video...

Page 19

ENGLISH
SPECIFICATIONS
17
MODEL TM-H1900G TM-H1700G
TypeColor video monitor
Color systemPAL, NTSC (3.58)
Picture tube49 cm (19) measured diagonally, 44 cm (17) measured diagonally,
90° deflection, in-line gun, 90° deflection, in-line gun,
trio-dot type trio-dot type
(phosphor dot-trio pitch 0.27 mm) (phosphor dot-trio pitch 0.27 mm)
Effective screen sizeWidth 365.8 mm (14-5/8) Width 327.5 mm (12-7/8)
Height 274.3 mm (10-7/8) Height 246.2 mm (9-5/8)
Diagonal 457.2 mm (18) Diagonal 407.1 mm (16-1/32)...

Page 20

395 (15-5/8)418 (16-1/2)
407 (16-1/8)
68 
(2-3/4)286 (11-3/8)
3 (1/8)3 (1/8)
336.3 (13-1/4)*
288 (11-3/8)
ø20
 (7/8)
256 (10-3/8)*
334 (13-1/4)  117 (7)
1.5
 (1/16)
POWERCHROMA MENU
INPUT  SELECT UNDER
SCAN
PHASETM-H1700GBRIGHT CONTRAST VOLUME/SELECTAB
Dimensions
< Front View >< Side View >
Unit : mm (inch)
18
POWERCHROMAMENUINPUT  SELECTUNDER
SCANPHASETM-H1900GBRIGHTCONTRASTVOLUME/SELECTAB
440 (17-3/8)496 (19-5/8)
485 (19-1/8)
95.7
 (3-7/8)336 (13-1/4) 375 (14-7/8)
*
380.4 (15)
284.3 (11-1/4)
*
375...
Start reading JVC Tm H1700g Instructions

Related Manuals for JVC Tm H1700g Instructions

All JVC manuals