Home > JVC > Monitor > JVC Tm H1750cg Instructions

JVC Tm H1750cg Instructions

Here you can view all the pages of manual JVC Tm H1750cg Instructions. The JVC manuals for Monitor are available online for free. You can easily download all the documents as PDF.

Page 21

ENGLISH
Problems
No power supply.
No picture with the
power on.
No sound.
Shaking picture.
No colors, wrong
color, or dark picture.
Unnatural, irregularly
colored, or distorted
picture.
Dark stripes appear
at the top and bottom
of the screen, picture
vertically squeezed.
The overall picture
size is too small.
Function buttons on
the front panel do not
function.
The INPUT SELECT
buttons do not
function.
Points to be checked
Is the power plug loosened or disconnected?
Is the main power turned OFF?
Is the...

Page 22

20
SPECIFICATIONS
MODEL TM-H1950CG TM-H1750CG
TypeColor video monitor
Color systemPAL, NTSC (3.58)
Picture tube49 cm (19) measured diagonally, 44 cm (17) measured diagonally,
90° deflection, in-line gun, 90° deflection, in-line gun,
trio-dot type trio-dot type
(phosphor dot-trio pitch 0.27 mm) (phosphor dot-trio pitch 0.27 mm)
Effective screen sizeWidth 365.8 mm (14-5/8) Width 327.5 mm (12-7/8)
Height 274.3 mm (10-7/8) Height 246.2 mm (9-5/8)
Diagonal 457.2 mm (18) Diagonal 407.1 mm (16-1/32)
Scanning...

Page 23

ENGLISH
POWERCHROMAMENUASPECTINPUT  SELECTUNDER
SCANCOLOR
OFFBLUE
CHECKPHASETM-H1950CGBRIGHTCONTRASTVOLUME/SELECTABSLOT  CD
440 (17-3/8)496 (19-5/8)
485 (19-1/8)
375 (14-7/8)
*
380.4 (15)
284.3 (11-1/4)
*
375 (14-7/8) 195.5 (7-3/4)
1.5
(1/16)
ø20
 (7/8)95.7
 (3-7/8)336 (13-1/4)
5 (1/4)
5 (1/4)
Dimensions
< Front View >< Side View >
Unit : mm (inch)
21
POWERCHROMA MENU
ASPECT
INPUT  SELECTSLOT  UNDER
SCANCOLOR
OFFBLUE
CHECK
PHASETM-H1750CGBRIGHT CONTRAST VOLUME/SELECT
ABCD
395 (15-5/8)418 (16-1/2)
407...

Page 24

21
●To use the SWITCHED OUT terminal, the main power must be ON. (Unlike a bridged output, this connector outputs relocked
digital signals.)
●Signal output from the SWITCHED OUT terminal can be changed by selecting INPUT C (SDI 1) or INPUT D (SDI 2). You can
use the front panel buttons or do it via external control.
●When INPUT-A or INPUT-B is selected, this terminal outputs the signals last selected. In the standby mode, signals from the
SDI 1 connector are output.
APPENDIX: CONNECTION EXAMPLES FOR THE...

Page 25

1107STH-MW-MT© 2007 Victor Company of Japan, Limited
TM-H1950CG/TM-H1750CG
aZ:U>DB=PT11/8/2007, 18:01 Page 25Nq|or$]ntrZnxr$C;BP
Start reading JVC Tm H1750cg Instructions

Related Manuals for JVC Tm H1750cg Instructions

All JVC manuals