JVC Ux1 Manual

MICRO COMPONENT SYSTEM
UX-G50—Consists of CA-UXG50 and SP-UXG50
INSTRUCTIONS
LVT1519-001C[J]
English
For Customer Use:Enter below the Model No. and Serial No.
which are located either on the rear, bot-
tom or side of the cabinet. Retain this
information for future reference.
Model No.                                                         
Serial No.                                                          
COVERC.FM  Page 1  Monday, April 24, 2006  7:48 PM 

 
G-1 
Warnings, Cautions and Others 
Mises en garde, précautions et indications diverses
  CAUTION:         TO REDUCE THE RISK OF ELECTRIC SHOCK,
                         DO NOT REMOVE COVER (OR BACK).
                      NO USER SERVICEABLE PARTS INSIDE.
  REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, 
within an equilateral triangle is intended to 
alert the user to the presence of uninsulated 
dangerous voltage within...

 
G-2 
For the main unit: 
Declaration of Conformity
Model Number: UX-G50
Trade Name: JVC
Responsible Party: JVC Americas Corp.
Address: 1700 Valley Road, Wayne
New Jersey 07470
Telephone Number: 973-317-5000
This device complies with Part 15 of FCC Rules. 
Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, 
and (2) this device must accept any interference 
received, including interference that may cause 
undesired operation. 
Note to CATV system...

 
G-3
IMPORTANT FOR LASER PRODUCTS / IMPORTANT POUR PRODUITS LASER 
1. CLASS 1 LASER PRODUCT
2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the 
unit; leave all servicing to qualified service personnel.
3.CAUTION: VISIBLE AND / OR INVISIBLE CLASS 1M LASER RADIATION WHEN 
OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL 
INSTRUMENTS.
4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.
1. PRODUIT LASER CLASSE 1
2.ATTENTION: Nouvrez pas le couvercle...

 
1 
Contents 
Introduction .....................................................2 
Precautions ......................................................................2
How to Read This Manual  ..............................................3 
Getting Started  ................................................4 
Step 1: Unpack  ................................................................4
Step 2: Prepare the Remote Control  ...............................4
Step 3: Hook Up...

 
2 
Introduction 
Thank you for purchasing the JVC Micro Component 
System. 
We hope it will be a valued addition to your home, giving 
you years of enjoyment. 
Be sure to read this instruction manual carefully before 
operating your new stereo system. 
In it you will find all the information you need to set up and 
use the system. 
If you have a query that is not answered by the manual, 
please contact your dealer. 
Precautions 
Installation 
•Install in a place which is level, dry and neither too hot...

 
3 
How to Read This Manual 
To make this manual as simple and easy-to-understand as 
possible, we have adapted the following methods:
•Button and control operations are explained as listed in the 
table below. In this manual, the operations using the 
remote control is mainly explained; however, you can use 
the buttons and controls on the main unit if they have the 
same (or similar) name and marks.
•
 
Some related tips and notes are explained later in the 
sections “Learning More about This System”...

 
4 
Getting Started 
Step  
1 
: Unpack 
After unpacking, check to be sure that you have all the 
following items. The number in parentheses indicates the 
quantity of each piece supplied.
•FM antenna (1)
•AM loop antenna (1)
•Remote control (1)
•Batteries (2)
If any item is missing, consult your dealer immediately. 
Step  
2 
: Prepare the Remote Control 
Insert the batteries into the remote control by matching the 
polarity (+ and –) correctly.
AM
EXT
G
ND AM
LO
OP
Step 1:Unpack the package and 
check...

 
5 
Step  
3 
: Hook Up 
If you need more detailed information, see page 7.
For more detailed information on connecting external equipment, see pages 13 and 14.
AM
EXT
GNDAM
EXT
GND AM
LOOP
Illustrations of the input/output terminals below are typical 
examples.
When you connect other components, refer also to their 
manuals since the terminal names actually printed on the rear 
may vary.
Turn the power off to all components before connections.
To a wall outlet
Plug the AC power cord only after all...

 
6
AM
EXT
GNDAM
LOOP
FM antenna (supplied)
Extend it so that 
you can obtain 
the best 
reception.
AM loop antenna (supplied)
Turn it until the best reception is 
obtained.
Non-stripe Black stripe
 
UX-G50[J].BOOK  Page 6  Thursday, February 9, 2006  4:11 PM