Home > Kenwood > Home Theater System > Kenwood Dvt 7300 Instruction Manual

Kenwood Dvt 7300 Instruction Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Kenwood Dvt 7300 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 176 Kenwood manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							DVR-6300 (EN/K,P,E,X)
    Set Up functions21
    Preparations
    According to the contents of the disc played in this unit, the LISTEN MODE (selected by the LISTEN MODE key) can be selected.
    To set the LISTEN mode manually
    Setting up LISTEN mode
    Each press switches the modes as shown below.
    (Display) / (OSD)
    1PRO LOGIC / PROL (Dolby Pro Logic)
    2
     MOVIE / MOVIE (Dolby Pro Logic II Movie)
    3 MUSIC / MUSIC (Dolby Pro Logic II Music)
    4 MATRIX / MTRX (Dolby Pro Logic II Matrix)
    53D SURR /3D SUR (3D Surround)
    6BYPASS / BYPASS
    1Press the LISTEN MODE key.
    At the time of PCM or DOLBY DIGITAL (2 ch) source
    REMOTE
    *5476/20-22/EN04.7.27, 2:05 PM 21
     
    						
    							DVR-6300 (EN/K,P,E,X)
    Set Up functions22
    Preparations
    Disc Subtitle
    Disc Menu
    Rating
    Country Code
    TV Aspect
    Menu Language
    Progressive Scan
     
     
    5.1 Speaker Setup
    Others Disc AudioRRFront L
    Volume          0 dB
    Size              Small
    Distance         1 ft
    Test
    Return
    Note Note
    Note Note
    Positioning the speakers
    To achieve the optimum effects obtainable with this
    SURROUND SOUND system, it is important to posi-
    tion the speakers properly. Refer to the following
    illustration to find the best location in your room.
    Speaker setting
    Speaker level (volume)
    For this unit, the speaker levels have been set in
    advance so that the best volume balance is obtained
    with standard use.
    Initial set values for the speaker level
    Front Left channel : 0dB
    Center channel : 0dB
    Front Right channel : 0dB
    Rear Right channel : 0dB
    Rear Left channel : 0dB
    Subwoofer(SW) : 0dB
    Front R speaker
    Front L speakerSub woofer Center speaker
    Rear L speakerRear R speaker
    Settings
    Reset as follows to match your listening environment.
    1Press SETUP key to display the menu.
    2Select 5.1 Speaker Setup on the setup menu
    then press the Cursor right (3) key.
    3Press the Cursor right (3) key to select the de-
    sired speaker.
    4Adjust options by using Cursor  (5/∞/2/3) keys
    on the remote.
    Speaker selection
    Select a speaker that you want to adjust.
    Front speakers (Left), Front speakers (Right), Cen-
    tre Speaker, Rear  speakers (Left), Rear  speakers
    (Right), or Subwoofer
    Certain speaker settings are prohibited by
    the Dolby Digital licensing agreement.
    Volume
    Press the Cursor left/right (2 / 3) keys on the remote
    to adjust the output level of the selected speaker.
     (-6dB ~ +6dB)
    Size
    Since the speaker settings are fixed, you cannot
    change the settings.
    Distance
    Setting the Distance lets the speakers know how far
    the sound has to travel to reach your set listening
    point. This allows the sound from each speaker to
    reach the listener at the same time. (1 ft = 30.48 cm)
    (0.3 m ~ 6 m, 1 ft ~ 20 ft)
    You can not set the distance of subwoofer speaker.
    Test
    Press ENTER to test the signals of each speaker.
    Adjust the volume to match the volume of test sig-
    nals memorized in the system.
    Front Left (L) = Centre= Front Right (R) =
    Rear Right (R) = Rear Left (L) = Subwoofer
    Return
    Press ENTER to return to the previous menu.
    Operation near a TV
    If the Subwoofer is installed near a TV set, the TV
    reception may be affected and interfered with color
    irregularities. Should color irregularities observed
    on TV screen, separate the Subwoofer from the
    TV until its reception becomes normal.
    Note Note
    *5476/20-22/EN04.7.27, 2:05 PM 22
     
    						
    							23
    DVR-6300 (EN/K,P,E,X)
    Operations
    Note Note
    1 /3
    1 /12
    0:20:09
    1 ENG
    D
    5.1 CH
    OFF
    1 /1
    BYPASS
    ABC
    1 /4
    0:20:09
    STER.
    BYPASS
     On screen display
    The on-screen Banner Display contains many playback features. To see the Banner Display, press ON SCREEN key
    on the remote while a disc is playing. Use the Cursor (5/∞/2/3) keys on the remote to move through the different
    features in the Banner Display. Each feature is illustrated with an icon.
     Last Scene Memory
    This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you
    remove the disc from the player or switch off the player. If you load a disc that has the scene memorized, the scene
    is automatically recalled.
    If you dont want to use the Last Scene Memory, press the STOP key during stop.
    This player does not memorize the scene of a disc if you switch off the player before commencing to play the disc.
    Example:
    On-Screen Display during playing DVD
    Title Number
    Chapter Number
    Time search
    Audio language
    and Digital Audio
    Output mode
    Subtitle language
    Angle
    Sound
    Example:
    On-Screen Display during playing VCD
    Track Number
    (or PBC mode)
    Time search
    Audio Channel
    Sound
    Before operation
    *5476/23-28/EN04.7.27, 2:05 PM 23
     
    						
    							24
    DVR-6300 (EN/K,P,E,X)
    Operations
    POWER/ON STANDBY
    INPUT 
    SELECTORVOLUME CONTROL POWER
    VOLUME
    MUTE
    3/[INPUT SELECTOR]PHONES
    Lets put out some sound
    Preparation
    Basic use method
    Selecting the desired input1
    2
    Muting the sound temporarily
    Listening through headphone
    REMOTEMAIN UNIT
    REMOTEMAIN UNIT
    To decrease To increaseTo decrease To increase
    ÷Press again to resume the original volume.
    ÷The sound muting is also cancelled when the volume is con-
    trolled. ÷Press MUTE key.
    Insert the headphone plug into the PHONES jack.
    ÷The sounds from all speakers are cut off.This unit offers various surround modes, but it switches
    automatically to stereo mode when headphones are connected.
    1CD/DVDª
    2VIDEO 1 (audio, video)
    3VIDEO 1 (video) + OPT (digital audio input)
    4VIDEO 2 (audio, video)
    5VIDEO 2 (video) + OPT (digital audio input)
    6TV-AUDIO (for Europe, input from SCART cable)
    7FM (frequency display)∞
    8AM (frequency display)∞
    REMOTE
    Turn on  the POWER.
    ÷The power will be switched on and the respective operation will
    be performed also when the 
    0 00 0
    0 key on the main unit is pressed
    during STANDBY mode.
    ÷When a disc is set in the disc tray and the CD/DVD key is pressed,
    disc playback will start automatically.
    Normally VOL MAX is displayed when the volume settings
    set to the maximum value.
    Volume adjustment
    1Press ‰/[INPUT
    SELECTOR] key for
    more than 3 seconds.
    2Press ‰/[INPUT
    SELECTOR] key
    repeatedly.
    each press switches
    the mode.After press ‰
    /[INPUT SELECTOR] key for more than 3
    seconds, each press ‰
    /[INPUT SELECTOR] key switches
    input modes as shown below.When press VIDEO 1/2 key
    on the remote, switches
    input modes as shown below.
    1VIDEO 1 (audio, video)
    2VIDEO 1 (video) + OPT
    (digital audio input)
    3VIDEO 2 (audio, video)
    4VIDEO 2 (video) + OPT
    (digital audio input)
    5TV-AUDIO
     (for Europe,
    input from SCART cable)
    *5476/23-28/EN04.7.27, 2:05 PM 24
     
    						
    							25
    DVR-6300 (EN/K,P,E,X)
    Operations
    TUNER/BAND
    PRESET
    8 / ST/MONO
    4 TUNING ¢
    Receiving broadcast station
    It is also possible to receive them by one-touch operations
    by storing up to 30 stations in the preset memory. (§ )
    When the key is pressed, this unit will be switched on
    automatically.
    Select the TUNER input1
    REMOTE
    Select the broadcast band2Each press changes the band.
    1FM
    2AMREMOTE
    Select a tuning mode3Each press switches the mode
    1“STEREO” : stereo mode
    2“MONO” : monaural mode
    Select a station4
    P.CALL (preset call) Auto tuning Manual tuning
    REMOTEMAIN UNIT
    Each time a key is pressed, the frequency
    is changed by one step.
    Use the manual tuning mode when re-
    ception is noisy due to weak reception. Press the TUNING (4/¢) keys on
    the main unit for more than 2 sec-
    onds to receive the next tuned sta-
    tion automatically Press the PRESET (5/∞) keys on the re-
    mote control to select a preset station.
    In case of input with the numeric keys.
    (Example)
    To select preset No.3 : 3
    To select preset No.14 : 14
    (within 3 seconds)
    MAIN UNIT
    Band display Preset numberTuning indicationStereo tuning indication
    Frequency display
    MAIN UNIT
    Press the TUNER/BAND key on the remote.
    Press the TUNER/BAND key on the remote.
    Press the 8 
    / ST./MONO key on the remote.
    or
    Numeric keys
    *5476/23-28/EN04.7.27, 2:05 PM 25
     
    						
    							26
    DVR-6300 (EN/K,P,E,X)
    Operations
    7 / MEMORY
    4 TUNING ¢
    Receiving broadcast station
    You can store up to 30 stations for FM and AM (MW) in
    the memory and recall with a single touch of the key.
    Select a station (auto tuning or manual
    tuning)
    ∞1
    Storing the broadcast stations (one-by-one presetting)
    Press the 7/MEMORY key on the main
    unit.2
    MAIN UNIT
    Select the desired preset number.3
    MAIN UNIT
    Press the 7/MEMORY key on the main
    unit.4
    MAIN UNIT
    Repeat steps 1 to 4 to preset other sta-
    tions.
    Blinks
    Please perform the next operation while the indicator is
    blinking.
    *5476/23-28/EN04.7.27, 2:05 PM 26
     
    						
    							27
    DVR-6300 (EN/K,P,E,X)
    Operations
    4 TUNING ¢
    RDS
    PRESET
    Receiving broadcast station
    Functions made possible with RDS
    PTY (Program Type Identification) Search :The tuner automatically searches for a station which is
    currently broadcasting a specified program type (genre).
    PS (Program Service Name) Display :When an RDS broadcast is received, the station name is
    automatically displayed. RDS is a system which transmits useful information (digital
    data) for FM broadcasts together with the broadcast signal.
    Tuners and receivers designed for RDS reception can extract
    the information from the broadcast signal for use with
    various functions such as automatic display of the station
    name.
    Using the RDS Display function
    Select the FM broadcast station.
    ∞1
    Press the RDS. key on the remote.2
    Each press switches the display mode as follows.
    1PS NAME display
    2Current FM  frequency display
    3PTY display
    4RT display
    5CT display
    PS NAME÷If the PS information is being received, the PS name (BBC,
    AFO, NDR, etc.) is shown on the display.
    ÷If the PS information is not received, the original FM fre-
    quency is shown.
    ÷Even though no RDS key is pressed, the reception of PS
    information ensues the PS name is displayed.
    RT display÷Text data accompanying the RDS broadcast scrolls across
    the display.
    ÷If the RT information is not received, the “RT NONE” is
    shown on the display.
    CT display÷If the CT information will take up to 2 minutes to be decoded
    therefore the clock is not displayed immediately.
    ÷If the CT information is not received, the “CT NONE” is
    shown on the display.
    ÷The CT clock does not update the system clock.
    Using RDS function ( for Europe only)
    RT (Radio text) :Displays the radio text data transmitted by some RDS
    stations when you select the RT mode.
    CT (Clock Time) :Decodes the real time clock from the FM frequency.
    or
    *5476/23-28/EN04.7.27, 2:05 PM 27
     
    						
    							28
    DVR-6300 (EN/K,P,E,X)
    Operations
    PTY SEARCH TUNER/BAND
    PTY
    RDS Program types
    News NEWS
    Current Affairs AFFAIRS
    Information INFO
    Sport SPORT
    Education EDUCATE
    Drama DRAMA
    Culture CULTURE
    Science SCIENCE
    Varied VARIED
    Pop Music POP M
    Rock Music ROCK M
    Easy Listening Music EASY M
    Light Classical Music LIGHT M
    Serious Classical Music CLASSICS
    Other Music OTHER M
    Weather WEATHER
    Finance FINANCE
    Children’s programs CHILDREN
    Social affairs SOCIAL
    Religion RELIGION
    Phone in PHONE IN
    Travel TRAVEL
    Leisure LEISURE
    Jazz Music JAZZ
    Country Music COUNTRY
    National Music NATION M
    Oldies Music OLDIES
    Folk Music FOLK M
    Documentary DOCUMENT
    Station Alarm Test  Message TEST
    Emergency Broadcast Information ALARM 1 Program Type Name
    Receiver Display
    PTY function
    The PTY information is composed of an identification sym-
    bol, which helps the FM radio to recognize the program type
    of each FM station.
    The 31 PTY modes are shown in the display by pressing
    the PTY key.
    Using the PTY search function
    Select the FM band.
    ∞1
    Press the PTY key.2
    ÷The PTY MODE (POP M, ROCK M etc.) ap-
    pears on the display.
    When the program type is selected,
    press the PTY SEARCH key.4
    Auto-search the station sequentially
    ÷Press again during search to cancel.
    Receiving broadcast station
    Press the PTY key to select the desired
    program type.3
    LitPTY foundPS display
    PTY not found
    After display of NO PTY, return is made to the nor-
    mal display.
    REMOTE
    REMOTE
    REMOTE
    REMOTE
    *5476/23-28/EN04.7.27, 2:05 PM 28
     
    						
    							29
    DVR-6300 (EN/K,P,E,X)
    Various playback functions
    Operations
    0
    Note Note
    POWER/ON/STANDBY
    POWER
    3 (PLAY) 7 (STOP)
    8 (PAUSE)
    3/[INPUT SELECTOR]
    MENUTOP MENU
    OPEN/CLOSE
    0 (OPEN/CLOSE) 7 
    / MEMORY8 / ST./MONO
    1Open the tray.
    2Place a disc.
    Basic play
    Preparation
    Load a disc.1
    Start playback.2
    CHAPTER No. (DVD)
    TRACK No. (CD/VCD)Time display
    To stop playback
    When a Disc Menu appears on the screen
    In case of interactive DVDs, a Disc Menu appears on the
    screen. Then press ENTER to select specific menu you
    want to play by using Cursor keys.
    MAIN UNIT
    MAIN UNITREMOTE
    MAIN UNITREMOTE
    ÷When the 3 key is pressed while a tray is open, the tray
    closes automatically, and then playback begins.
    When a menu screen is recorded on the DVD disc, the menu screen will be displayed when the TOP MENU key or
    MENU key on the remote is pressed. At the menu screen, the menu can be selected by pressing the Cursor keys.
    Label side
    To pause playback
    MAIN UNITREMOTE
    ÷During DVD playback, step operation is performed each
    time this key is pressed. (⁄)
    Playback of disc
    ÷READING appears on the TV screen.
    TITLE No. (DVD)
    or
    Turn on  the POWER.
    *5476/29-35/EN04.7.27, 2:05 PM 29
     
    						
    							30
    DVR-6300 (EN/K,P,E,X)
    Various playback functions
    Operations
    4 TUNING ¢ 4 , ¢
    Notes
    Notes
    Note Note
    ÷You wont hear the sound (audio) on the DVD and VCD when
    youre using the Skip, Search, Step or Slow motion features.
    ÷Playback features are not available during the opening cred-
    its of a movie.
    Playback of disc
    MAIN UNITREMOTE
     Skipping chapters or tracks
    ÷The chapter (or track) in the direction of the key pressed is
    skipped, and the selected chapter (or track) will be played
    from the beginning.
    ÷When the 4 key is pressed once during playback, the chap-
    ter (or track) being played will be played from the beginning.
    ÷When the 4 key is pressed within 3 seconds after the start
    of chapter (or track) playback, playback starts from the start
    of the preceding chapter (or track).
     Searching
    ÷Press the 3 key at any time to resume normal playback. (At the time of DVD playback)
    1FF  2 X (¢ key) or FR  2 X (4 key)
    2FF  4 X (¢ key) or FR  4 X (4 key)
    3FF  16 X (¢ key) or FR  16 X (4key)
    4FF 100X (¢ key) or FR 100X (4key)
    4 : To skip backward
    ¢ : To skip forward
    4: To search backward (FR)
    ¢: To search forward (FF)
    MAIN UNITREMOTE
    Disc playback features
    ÷The Chapter feature wont work if the disc isnt for-
    matted with separate chapters.
    1During playback, press 4 or ¢ key for more
    than 2 seconds.
    MAIN UNITREMOTE
    2Press and hold 4 or ¢ key repeatedly.÷Each press and hold switches the searching speed.
    (At the time of CD/VCD playback)
    1FF  2 X (¢ key) or FR  2 X (4 key)
    2FF  4 X (¢ key) or FR  4 X (4 key)
    3FF  8 X (¢ key) or FR  8 X (4key)
    *5476/29-35/EN04.7.27, 2:05 PM 30
     
    						
    All Kenwood manuals Comments (0)

    Related Manuals for Kenwood Dvt 7300 Instruction Manual