Keurig B150 User Manual

11
Home
Auto OFF Brew Temp
LanguageClock
ON/OFF TimeBrew Size(s)
Contact
Menu Key Navigation
Home
Press HOME at any time to return to your brewer to an idle state. 
Clock
Setting the clock is optional. To program the clock, follow the 
instructions on page 12.
Brew Temp
The brew temperature is pre-set at 193˚F. You do not have to set 
the brew temperature but you can adjust it up or down by 5˚. 
Simply follow the instructions on page 12. 
Brew Size(s)
Five brew sizes are available: 4 oz., 6 oz., 8 oz.,...

12
Setting the Clock
Setting the clock is optional. When the clock is set, the time will appear in the 
LCD Control Center. 
NOTE: You must set the clock if you will be programming 
the Auto On/Off Time feature.
1. 
From the Menu Mode, press “CLOCK”. 
2.  The set clock screen will display 
“DISABLED” if the brewer is new or if 
electrical power has been interrupted. 
Press “DISABLED” to set a time. Press H 
repeatedly to advance the hour in steps or 
hold it down to scroll through the hours 
quickly....

13
Programming Your Brew Size
All brew sizes are enabled in the default setting. If you want to disable any 
brew size, just press on the appropriate icon(s).  Please follow instructions 
outlined below.
1.  From the Menu Mode, press 
“SET BREW SIZE(S)”.
2.  The LCD will display all enabled brew sizes. 
To disable a brew size press the icon. The 
check mark will change to an ‘X’ indicating 
that the brew size is disabled (f ig.15).
3.  Once you have selected your desired brew 
size(s), press
 “OK”. The...

SECTION 2 Menu Controls & Indicators (continued)
14
Setting Contact Screen
The contact screen is pre-programmed with 
the following information: Keurig, Inc. and 
 www.keurig.com.
You can reprogram the brewer with your contact 
information. The contact screen will appear in 
the screen saver.
1.  From the Menu Mode, press “CONTACT”.
The LCD screen will display the Keurig 
default contact information (fig.19).
2.  Press the Upper (Company Name) Box. T he 
Keypad will appear along with the current...

15
b.  Press “OK” to save your changes and 
return to the Main Contact Screen.
NOTE: Pressing the Back Arrow Key will 
return to the Main Contact Screen without 
saving changes.
3.
  Press the Middle (Phone Number) Box. T he 
Numeral Keypad Mode will appear along 
with the current information (fig.21). 
a. Delete current phone number and enter
  new information using the Keypad
. 
b.  Press “OK” to save your changes and 
return to the Main Contact Screen.
4. Press the Lower Box. This box can be...

16
 using the t wo front ribs as a guide, and snap 
  them into place from the top. 
2.  Cleaning the Funnel —The Funnel can be 
removed from the K-
Cup Holder by pulling 
on it until it pops off (fig. 24). The Funnel is 
dishwasher safe. To replace it, just snap it 
back onto the K-Cup Holder.
3.  Cleaning the Exit Needle —The Exit Needle 
is located on the inside bottom of the K-Cup 
Holder. Should a clog arise due to coffee 
grinds, it can be cleaned using a paper clip 
or similar tool. Remove the...

De-Scaling Instructions
A. PREPARE 
Step 1:  Make sure you have at least 90 oz. of undiluted white vinegar 
on hand. You will also need an empt y sink and a large ceramic mug 
(do not use a paper cup). 
Step 2: Empt y the water in the Water Reser voir.
Step 3: Disable “Auto Off” and programmed “On Off” time (pages 13-14). 
B. FILL AND CLE AN 
Step 1:  Pour the vinegar into the Water Reser voir to fill it.
Step 2:  Place a large mug on the Drip Tray Plate and run a water brew cycle. 
DO NOT USE A K-CUP,...

SECTION 4  Tr o u b l e s h o o t i n g
18
Situation 
Brewer does not 
have power
Brewer will not brew
Chlorine or mineral 
taste in coffee
Solution 
• Plug Brewer into an independent outlet.• Check to be sure that it is plugged in securely. • Plug into a different outlet. • Reset your home’s circuit breaker if necessar y.•  Make sure that the Power Switch has been 
turned on and LCD Display is illuminated.
•  After placing the K-Cup® in the K-Cup Holder, make 
sure the Handle is pushed down securely and...

SECTION 5  Warranty
Limited One Year Warranty 
Keurig® warrants that your Brewer will be free of defects in materials or 
workmanship 
under normal use for one year from the date of purchase. It is 
recommended that you fill out and return the warrant y card enclosed with 
your Brewer so that your purchase information will be stored in our system. 
Keurig will, at its option, repair or replace the Brewer without charge upon its 
receipt of proof of the date of purchase. If a replacement Brewer is neces-...

Lors de l’utilisation de tout appareil électrique, 
des mesures de sécurité de base devraient être 
suivies, et notamment :
1.  Lire toutes les instructions avant l’utilisation.
2.   Ne pas toucher les sur faces chaudes. Utiliser
les poignées s’il y en a.
3.  Installer correctement l’appareil et le placer 
dans un endroit conforme aux présentes 
instructions avant de l’utiliser.
4.  L’utilisation d’accessoires non recommandés 
par le fabricant de l’appareil risque de causer 
des incendies, des chocs...