Home > Kodak > Printer > Kodak C142 User Manual

Kodak C142 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Kodak C142 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 96 Kodak manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Transferring, printing pictures
    www.kodak.com/go/support
     35
    Printing pictures
    Direct printing with a KODAK All-in-One Printer
    Your camera is compatible with PICTBRIDGE Technology, so you can print directly to 
    PICTBRIDGE enabled Printers. You need a camera, a PICTBRIDGE enabled Printer, and 
    a USB cable.
    Connecting the camera to a KODAK All-in-One Printer
    1Turn off the camera and printer.
    2Connect the USB cable from the camera to the printer.
    Printing from a KODAK All-in-One Printer
    1Turn on the printer. Turn on the camera. 
    The PictBridge logo is displayed, followed by the current picture and menu. (If no 
    pictures are found, a message is displayed.) If the menu turns off, press any button to 
    redisplay it. If the printer sees the camera as a mass storage device, turn the camera off 
    and then back on.
    2Choose a printing option, then press OK.
    Current Picture—Press   to choose a picture.
    Tagged Pictures—If your printer is capable, print pictures that you marked for 
    printing.
    Index Print—Print thumbnails of all pictures. (This option requires one or more 
    sheets of paper.)
    All Pictures—Print all pictures in internal memory or on a card.
    Image Storage—Access Auto or Internal Memory.
    NOTE:  During direct printing, pictures are not permanently transferred or saved to the printer. To transfer 
    pictures to your computer, see page 34.
    Purchase cables, accessories www.kodak.com/go/c142accessories
    Downloaded From camera-usermanual.com Kodak Manuals 
    						
    							36www.kodak.com/go/support Transferring, printing pictures
    Disconnecting the camera from a KODAK All-in-One Printer
    1Turn off the camera and printer.
    2Disconnect the USB cable from the camera and the printer.
    Ordering prints online
    KODAK Gallery (www.kodakgallery.com) makes it easy to:
    ■Upload your pictures.
    ■Edit, enhance, and add borders to your pictures.
    ■Store pictures, and share them with family and friends.
    ■Have prints, photo greeting cards, frames, and albums delivered to your door.
    Printing from an optional SD or SDHC Card
    ■Automatically print tagged pictures when you insert your card into a printer with 
    an SD/SDHC Card slot. See your printer user’s guide for details.
    ■Make prints at an SD/SDHC Card-capable KODAK Picture Kiosk. Go to 
    www.kodak.com/go/picturemaker.
    ■Take the card to your local photo retailer for professional printing.
    Downloaded From camera-usermanual.com Kodak Manuals 
    						
    							Transferring, printing pictures
    www.kodak.com/go/support
     37
    Marking your pictures for printing
    1Press the Review  button. Press   to find a picture. 
    2Press the Menu   button.
    3Press   to choose Print, then press OK.
    4Press   to choose the number of copies. 
    Optional: You can apply a print quantity to other pictures. Press   for 
    previous/next. Repeat this step until the desired print quantity is applied to each 
    picture.
    5Press OK.
    Press the Shutter button halfway down to return to Capture mode.
    IMPORTANT: Your camera offers a built-in Help system. See page 38.
    Downloaded From camera-usermanual.com Kodak Manuals 
    						
    							38www.kodak.com/go/support
    7Troubleshooting
    Getting help from your camera
    You want the most from your camera. You want to understand:
    ■What it can do for you
    ■And how to take the best possible pictures and videos
    Great news!
    Your camera offers a built-in Help system. It describes every setting for every menu 
    choice. If you learn nothing else about your camera, learn how to use on-camera Help. 
    Turning on camera Help 
    Scroll through a Help topic. Press the Menu 
    choose a menu choice.
    Press the Info
    1
    button.
    2
    button,
    Downloaded From camera-usermanual.com Kodak Manuals 
    						
    							Troubleshooting
    www.kodak.com/go/support
     39
    Troubleshooting
    Camera problems
    StatusSolution
    Camera does not 
    turn on■Make sure the batteries are installed correctly (see page 1).
    ■Make sure batteries are new. If batteries are rechargeable, make 
    sure they are fully charged (see charger documentation).
    Camera does not turn 
    off
    Camera buttons and 
    controls do not 
    function
    In Review, a blue or 
    black screen is 
    displayed instead of 
    a picture■Tr a n s f e r  all pictures to the computer (see page 34).
    ■Take another picture.
    Pictures remaining 
    number does not 
    decrease after taking a 
    picture■Continue taking pictures. The camera is operating normally.
    (The camera estimates the number of pictures remaining after each 
    picture is taken, based on picture size and content.)
    Flash does not fire■Check the flash setting, and change as needed (see page 8).
    NOTE:  The flash does not fire in all modes.
    Memory card is almost 
    or entirely full ■Transfer the pictures to the computer (see page 34).
    ■Delete pictures from the card (see page 18) or insert a new card.
    Battery life is short■Make sure the correct battery type is installed (see page 48).
    ■Wipe the contacts with a clean, dry cloth before inserting 
    batteries in the camera.
    ■Insert new/charged batteries (see page 1).
    Downloaded From camera-usermanual.com Kodak Manuals 
    						
    							40www.kodak.com/go/support Troubleshooting
    Computer/connectivity problems
    You cannot take a 
    picture■Turn the camera off, then on again.
    ■Depress the Shutter button all the way (see page 4).
    ■Insert new/charged batteries in the correct orientation (see 
    page 1).
    ■When inserting a memory card, push it in until it clicks (see 
    page 3).
    ■Memory is full. Transfer pictures to the computer (see page 34), 
    delete pictures (see page 18), or insert another card.
    Memory card not 
    recognized or camera 
    freezes with card■Use a card reader to check the card on a computer. If it’s 
    corrupted, format the card in the camera (see page 33).
    ■Try another SD or SDHC Card.
    Cannot find the 
    desired picture/video■To view pictures on a card or in internal memory, see page 17.
    StatusSolution
    Slide Show does not 
    run on an external 
    video device■Adjust the camera Video Out setting to NTSC or PAL (see 
    page 32).
    ■Make sure the external device settings are correct. (See the 
    device’s user guide).
    Computer does not 
    communicate with 
    the camera■Turn off the camera, then turn it back on.
    ■Make sure the battery is charged and installed correctly (see 
    page 1).
    ■Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is 
    connected to the camera and the computer (see page 34). Then 
    turn on the camera.
    ■See KODAK Software Help at www.kodak.com/go/camerasw.
    StatusSolution
    Downloaded From camera-usermanual.com Kodak Manuals 
    						
    							Troubleshooting
    www.kodak.com/go/support
     41
    Picture quality problems
    StatusSolution
    Picture is not clear■To automatically set exposure and focus, press the Shutter button 
    halfway. When the framing marks turn green, press the Shutter 
    button completely down to take the picture.
    ■Clean the lens (see page 46).
    ■Make sure the camera is not in Macro mode if you are more than 
    27.6 in. (70 cm) from your subject (see page 30).
    ■Place the camera on a flat, steady surface or use a tripod (especially 
    in high-zoom settings or in low light).
    ■Use a larger picture size (see page 28).
    ■If you’re manually adjusting the ISO speed, realize that high ISO 
    setting may cause grainy pictures (see page 29).
    Picture is too dark■Reposition the camera for more available light.
    ■Use Fill flash (see page 8) or change your position so light is not 
    behind the subject.
    ■Move so that the distance between you and the subject is within the 
    effective flash range. (See Camera Specifications starting on 
    page 44.)
    ■To automatically set exposure and focus, press the Shutter button 
    halfway. When the framing marks turn green, press the Shutter 
    button completely down to take the picture.
    ■In Program mode, adjust the Exposure Compensation (see page 29).
    Picture is too light■Reposition the camera to reduce the amount of available light.
    ■Turn the flash off (see page 8).
    ■Move so that the distance between you and the subject is within the 
    effective flash range. (See Camera Specifications starting on 
    page 44.)
    ■To automatically set exposure and focus, press the Shutter button 
    halfway. When the framing marks turn green, press the Shutter 
    button completely down to take the picture.
    ■In Program mode, adjust the Exposure Compensation (see page 29).
    Downloaded From camera-usermanual.com Kodak Manuals 
    						
    							42www.kodak.com/go/support Troubleshooting
    Direct printing (PICTBRIDGE enabled printer) problems
    Status Solution
    Cannot find the 
    desired picture■Use the Direct printing menu to change the image storage location.
    The Direct printing 
    menu interface turns 
    off■Press any camera button to redisplay the menu.
    Cannot print pictures■Make sure there is a connection between the camera and the 
    printer (see page 35).
    ■Make sure the printer and the camera have power.
    Camera or printer 
    displays an error 
    message■Follow the prompts to resolve the issue.
    Downloaded From camera-usermanual.com Kodak Manuals 
    						
    							Troubleshooting
    www.kodak.com/go/support
     43
    Getting help on the Web
    Camera
    Software
    Other
    Get support for your product (FAQs, troubleshooting 
    information, arrange for repairs, etc.)www.kodak.com/go/c142support
    See step-by-step solutions and repair informationwww.kodak.com/go/itg
    Purchase camera accessorieswww.kodak.com/go/c142accessories
    Download the latest camera firmware and softwarewww.kodak.com/go/c142downloads 
    See online demonstrations of your camerawww.kodak.com/go/howto
    Register your camerawww.kodak.com/go/register
    Chat, email, write, or phone Kodak 
    (Chat not available in all languages)www.kodak.com/go/contact
    Download and get Help with other KODAK Softwarewww.kodak.com/go/camerasw
    Download KODAK EASYSHARE Softwarewww.kodak.com/go/easysharesw 
    (or see Help in EASYSHARE Software)
    Get help with the WINDOWS OS and working with 
    digital pictureswcww.kodak.com/go/pcbasics
    Get support for cameras, software, accessories, morewww.kodak.com/go/support
    Get information on KODAK All-in-One Printerswww.kodak.com/go/inkjet 
    Downloaded From camera-usermanual.com Kodak Manuals 
    						
    							44www.kodak.com/go/support
    8Appendix
    Camera specifications
    CCD—1/2.5-type
    Effective pixels—10 MP (3672 x 2760) 
    LCD—2.5 in. (6.35 cm) LCD; 230K pixels; 4:3 aspect ratio
    Image storage—Optional SD/SDHC Card   (The SD logo is a trademark of the 
    SD Card Association.) Maximum supported card size: 32 GB
    Internal storage capacity—32 MB internal memory (15 MB available for image 
    storage. 1 MB equals one million bytes.)
    Taking lens—3X optical zoom; f/2.9–f/5.2; 35 mm equivalent: 34–102 mm
    Lens protection—Built-in
    Digital zoom—5X continuous
    Focus system—TTL-AF (through-the-lens auto focus); Multi-Zone, Center-Zone, 
    Face Priority. Working range:
    0.6 m (2 ft)–infinity @ wide, normal
    0.6 m (2 ft)–infinity @ telephoto, normal
    13–70 cm (5.1–27.6 in.) @ wide, Macro mode
    35–70 cm (13.8–27.6 in.) @ telephoto, Macro mode
    Auto focus control—Continuous and Single AF
    Fa c e  d e t e c t i o n —Ye s
    Shutter speed—8–1/1600 seconds
    Long time exposure—0.5–8 seconds
    ISO speed—Smart Capture mode: Auto 80–400
    Program mode: Auto 80-400; manual 80, 100, 200, 400, 800, 1600
    Downloaded From camera-usermanual.com Kodak Manuals 
    						
    All Kodak manuals Comments (0)

    Related Manuals for Kodak C142 User Manual