Kodak Dp1050 Projector User Manual

Contents21
1332 (ELEK). KODAK ENG  15.07.98  13:33  Side 21 

Contents22
7.2 Set-up menu
Set-up menu 
In the set-up menu the following  
sub-menus are available:
uPicture orientation
uLanguage
uMouse system
uQuick key assignment
uZAP keys assignment
uLamp hours
7.2.1  Picture orientation 
Picture orientation 
The picture orientation menu is used for rotating and 
mirroring the picture. 
Normal 
Normal is used when the projector is standing on a
table projecting a picture on a screen. 
Mirror 
Mirror is used when the projector is projecting the
picture from the back...

Contents
23Rotate
Rotate is used when the projector is ceiling mounted
and projecting image from the front.
Rotate and mirror
Rotate and mirror is used when the projector is ceiling
mounted and projects the picture from the back of the
screen.
7.2.2  Mouse systemMouse system selection 
USB and mouse for MAC will be selected automatically
when the mouse cable is connected. If your PC uses
RS232 mouse, you must choose MS Serial Mouse in
this menu. If your PC uses PS/2 mouse, you must
choose PS/2 in the...

Contents
247.2.3  Language Language selectionThis menu allows you to choose between six different
menu languages: English, French, German, Italian,
Spanish and Norwegian.
Click in the box next to the language you want to use.
Click on the OK button. The window will disappear, and
the selected language will be used in the main menu
and in all other menus.
1332 (ELEK). KODAK ENG  15.07.98  13:33  Side 24 

Contents25
1332 (ELEK). KODAK ENG  15.07.98  13:33  Side 25 

Contents
267.2.5   Zap menuZap menu
The Zap menu is used to assign functions to the zap
keys on the remote control. 
The menu consists of two columns of buttons where
the left column assigns the functions to the Zap 1 key
and the right column assigns the functions to the 
Zap 2 key.Volume (+/-)
Controls the sound of active source.
TV channel
Controls the pre programmed TV channel assignments.
If a TV tuner is installed and selected as source you
can select TV channel by using the zap keys.
Pointer
You...

Contents
277.2.6   Television programsThis menu is only displayed if the TV tuner is installed
and TV tuner is selected as source. The television 
program menu is then activated by pressing the
”television program” iconThe TV setup menu is divided in two parts:
u
Automatic TV station 
u
Program
Automatic TV station search
This function selects all TV stations with a signal (maximum
60 stations). These will be symbolized with a TV icon. 
1332 (ELEK). KODAK ENG  15.07.98  13:33  Side 27 

Contents
28Programming new channels
There are 30 channels that can be preprogrammed.
By selecting the Search button the system will scan
through all available TV channels. A TV icon will
symbolize all channels found.When assigning a Channel to a Program:
1.
Select a channel in the automatic search menu by
clicking on the TV icon symbolizing the wanted TV
station.
2.
The TV channel will be activated, and the icon will be
highlighted
3.
Select the program you want to place this channel on
4.
TV icon will...

Contents
297.2.7  Show accumulated lamp timeShow accumulated lamp time
In this window you can see the accumulated time that
the lamp have been used. You also use this window to
reset the accumulated lamp time when you have
changed lamp.
7.3  Control panel menuControl panel menu
In the control panel you have access to menus for
adjusting picture and audio settings. 
The icons ”Picture positioning” and
”Synchronization Adjustments” are only 
visible if PC source is active.
1332 (ELEK). KODAK ENG Z...

Contents
307.3.1  Picture controlSelect the picture control menu for adjusting brightness,
saturation and tint. 
When PC is selected as source and auto contrast is
marked, only brightness will be available.When PC is selected as source, only brightness and
contrast will be available. 
1332 (ELEK). KODAK ENG  15.07.98  13:33  Side 30