Kodak Dp850 Projector User Manual

Contents
21Source
You can connect four different sources to the KODAK
DP850 ULTRA; one computer source, two video
sources and one TV tuner (optional). 
You select the source you want to use by clicking on
the icon representing the source. Use the pressure-
sensing pad on the remote mouse to move the mouse
pointer to an icon and click the button (left mouse)
underneath the remote mouse.
Set-up menu
In this menu you set up the projector with settings that
will not be changed often, e.g. language, mouse...

Contents
227.2 Set-up menuSet-up menu
In the set-up menu the following 
sub-menus are available:u
Picture orientation
u
Language
u
Mouse system
u
Quick key assignment
u
ZAP keys assignment
7.2.1  Picture orientation Picture orientation
The picture orientation menu is used for rotating and
mirroring the picture.
Normal
Normal is used when the projector is standing on a
table projecting a picture on a screen.
Mirror
Mirror is used when the projector is projecting the
picture from the back of the screen...

Contents
23Rotate
Rotate is used when the projector is ceiling mounted
and projecting image from the front.
Rotate and mirror
Rotate and mirror is used when the projector is ceiling
mounted and projects the picture from the back of the
screen.
7.2.2  Mouse systemMouse system selection 
USB and mouse for MAC will be selected automatically
when the mouse cable is connected. If your PC uses
RS232 mouse, you must choose MS Serial Mouse in
this menu. If your PC uses PS/2 mouse, you must
choose PS/2 in the...

Contents
247.2.3  Language Language selectionThis menu allows you to choose between six different
menu languages: English, French, German, Italian,
Spanish and Norwegian.
Click in the box next to the language you want to use.
Click on the OK button. The window will disappear, and
the selected language will be used in the main menu
and in all other menus.
1214 (ELEK). KODAK ENG  05-05-98  11:41  Side 24 

Contents
257.2.4  Quick menuQuick menu settingsIn the quick menu you can assign functionality for the
quick key on the remote control. When clicking on the
quick key you will be able to switch between all the
functions you have selected in this menu. In this 
example, the first time you click on the quick key you
will activate the volume function. A volume bar will be
displayed at the bottom of the projected image where
you can adjust the volume up and down. You adjust the
bar by either pressing the...

Contents
267.2.5   Zap menuZap menu
The Zap menu is used to assign functions to the zap
keys on the remote control. 
The menu consists of two columns of buttons where
the left column assigns the functions to the left key and
the right column assigns the functions to the right key.Volume (+/-)
Controls the sound of active source.
TV channel
Controls the pre programmed TV channel assignments.
If a TV tuner is installed and selected as source you
can select TV channel by using the zap keys.
Pointer
You can...

Contents
277.2.6   Television programsThis menu is only displayed if the TV tuner is installed
and TV tuner is selected as source. The television 
program menu is then activated by pressing the
”television program” icon
The TV setup menu is divided in two parts:u
Automatic TV station 
u
Program
Automatic TV station search
This function selects all TV stations with a signal (maximum
60 stations). These will be symbolized with a TV icon. Programming new channels
There are 30 channels that can be...

Contents
287.2.7  Product informationProduct information
Click on the product information icon in order to get
information about the product and company. 
Press the main menu button again to exit this screen
7.3  Control panel menuControl panel menu
In the control panel you have access to menus for
adjusting picture and audio settings. 
The icons ”Picture positioning” and
”Synchronization Adjustments” are only 
visible if PC source is active.
1214 (ELEK). KODAK ENG  05-05-98  11:41  Side 28 

Contents
297.3.1  Picture controlPicture controlSelect the picture control menu for adjusting brightness,
saturation and tint. When PC is selected as source,
only brightness will be available. 
When PAL/SECAM video is selected brightness,
contrast and saturation will be available. All options will
be available for NTSC video. 
Select OK to save your changes and exit, or select
Cancel to exit without saving your changes.
Selecting Default restores factory settings.
1214 (ELEK). KODAK ENG  05-05-98  11:41...

Contents
307.3.2  Picture positioning Picture positioning 
Adjust vertical and horizontal position of the picture on
the screen with the two sliders.
Select OK to save your changes and exit, or select
Cancel to exit without saving your changes.
7.3.3   Audio controlAudio control
Select this function when you have connected an audio
signal to the ‘Audio in’ on the KODAK DP850 ULTRA
connectors (or through the EVC cable). Use the four
sliders to adjust volume, bass, treble and balance until
you have a...