Kodak M583 User Manual

							www.kodak.com/go/support 45
7Troubleshooting
Troubleshooting
Camera problems
StatusSolution
Short battery life■Watch the battery level (see page 10).
■Make sure the battery is charged (see page 2).
■Limit the time you review pictures/videos on the camera LCD.
■Purchase a spare battery at www.kodak.com/go/accessories.
Camera does not 
turn on/off or function■Make sure the battery is installed correctly (see page 1) and 
charged (see page 2).
LCD is too dark.■Adjust the LCD Brightness setting in the Settings menu (see 
page 40).
Flash does not fire■The flash does not fire in all modes. Change modes as needed 
(see page 13).
Memory card is almost 
or entirely full ■Transfer the pictures to the computer (see page 42).
■Delete pictures from the card (see page 21) or insert a new card.
You cannot take a 
picture■Turn the camera off, then on again.
■Depress the Shutter button all the way (see page 7).
■Insert a new/charged battery (see page 1).
■Memory is full. Transfer pictures to the computer (see page 42), 
delete pictures (see page 21), or insert another card.
Pictures remaining 
number does not 
decrease after taking a 
picture■Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each 
picture is taken, based on picture size and content.)
Downloaded From camera-usermanual.com Kodak Manuals 
						

							46www.kodak.com/go/support Troubleshooting
Computer/connectivity problems
Direct printing (PICTBRIDGE enabled Printer) problems
Memory card not 
recognized or camera 
freezes with card■Card may be corrupted. Format the card in the camera (see 
page 41). CAUTION: Everything on the card is erased.
■Use another memory card. Only MicroSD or MicroSDHC Cards 
are supported.
Cannot find the 
desired picture/video■To view pictures on a card or in internal memory, see page 19.
StatusSolution
Computer does not 
communicate with 
the camera■Turn off the camera, then turn it back on.
■Make sure the battery is installed correctly (see page 1) and 
charged (see page 2).
■Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is 
connected to the camera and the computer (see page 42). Then 
turn on the camera.
■See KODAK Software Downloads at 
www.kodak.com/go/camerasw.
Status Solution
Cannot print■Change the Computer Connection setting (in the Settings menu) to 
Other Application (see page 41).
StatusSolution
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Troubleshooting
www.kodak.com/go/support
 47
Picture quality problems
StatusSolution
Picture is not clear■To automatically set exposure and focus, press the Shutter button 
halfway. When the framing marks turn green, press the Shutter 
button completely down to take the picture.
■Clean the lens (see page 51).
■Place the camera on a flat, steady surface or use a tripod (especially 
in high-zoom settings or in low light).
■Use a larger picture size (see page 40).
■If you’re manually adjusting the ISO speed, realize that a high ISO 
setting may cause grainy pictures (see page 16).
Picture is too dark■Reposition the camera for more available light.
■Use Fill flash (see page 13) in Program mode, change your position 
so light is not behind the subject, or use the Backlight SCN mode.
■Move so that the distance between you and the subject is within the 
effective flash range. (See Specifications starting on page 49.)
■To automatically set exposure and focus, press the Shutter button 
halfway. When the framing marks turn green, press the Shutter 
button completely down to take the picture.
■In Program mode, increase the Exposure Compensation (see 
page 16).
Picture is too light■Reposition the camera to reduce the amount of available light.
■Turn the flash off (see page 13).
■Move so that the distance between you and the subject is within the 
effective flash range. (See Specifications starting on page 49.)
■To automatically set exposure and focus, press the Shutter button 
halfway. When the framing marks turn green, press the Shutter 
button completely down to take the picture.
■In Program mode, decrease the Exposure Compensation (see 
page 16).
Downloaded From camera-usermanual.com Kodak Manuals 
						

							48www.kodak.com/go/support Troubleshooting
Getting help on the Web
Get support for your product (FAQs, troubleshooting 
information, etc.)www.kodak.com/go/m583support
Download the latest camera firmware and softwarewww.kodak.com/go/m583downloads 
See videos of your camerawww.kodak.com/go/m583demos 
Purchase camera accessorieswww.kodak.com/go/accessories
Register your camerawww.kodak.com/go/register
Chat, email, write, or phone Kodak 
(Chat not available in all languages)www.kodak.com/go/contact
Downloaded From camera-usermanual.com Kodak Manuals 
						

							www.kodak.com/go/support 49
8Appendix
Specifications
CCD—1/2.3-type
Effective pixels—14 MP (4352 x 3264)
LCD—3.0 in. (6.9 cm) LCD; 230K dots; 4:3 aspect ratio
Image storage—Accessory MicroSD/SDHC Card   (The SD logo is a 
trademark of the SD Card Association.) Maximum supported card size: 32 GB
Internal storage capacity—32 MB internal memory (18 MB available for image 
storage. 1 MB equals one million bytes.)
Taking lens—8X optical zoom; f/3.3–f/5.8; 35 mm equivalent: 28–224 mm
Digital zoom—5X continuous
Focus system—TTL-AF (through-the-lens auto focus); Multi-Zone, Center-Zone, 
Face Priority. Working range:
0.6 m (2.0 ft)–infinity @ wide, normal
2.0 m (6.6 ft)–infinity @ telephoto, normal
0.1–0.7 m (0.3–2.3 ft) @ wide, Macro mode
1.0–2.1 m (3.3–6.9 ft) @ telephoto, Macro mode
Auto focus control—Continuous and Single AF
Fa c e  d e t e c t i o n —Ye s
Face recognition—Ye s
Shutter speed—1/8–1/1600 seconds
Long time exposure—1/2–8 seconds
ISO speed—Auto: 64–400; Manual: 64, 100, 200, 400, 800, 1600
Focus/Exposure Zone—TTL-AE; Face Priority, Multi-Zone, Center-Zone
Downloaded From camera-usermanual.com Kodak Manuals 
						

							50www.kodak.com/go/support Appendix
Exposure compensation—+/-2.0 EV with 1/3 EV step
White Balance—Auto, Daylight, Tungsten, Fluorescent, Open Shade
Electronic Flash—Auto flash; Auto, Fill, Red Eye, Off; Guide No. 5.9 (m) @ ISO 
400; working range in Smart Capture mode: 0.6–3.4 m (2–11.2 ft) @ wide; 0.7–2.0 
m (2.3–6.6 ft) @ telephoto 
Self-timer mode—2 seconds, 10 seconds, 2 picture timer
Burst mode—Maximum 3 pictures @ 1.5 fps
Capture modes—Smart Capture, Film Effects, Scene modes, Photobooth, Video 
(see page 14)
Image file format—
Still: EXIF 2.3 (JPEG compression); file organization DCF
Video: MP4, CODEC H.264
Picture size—14 MP (4:3): 4288 x 3216 pixels 
12 MP (3:2): 4288 x 2848 pixels 
10 MP (16:9): 4288 x 2416 pixels 
6 MP (4:3): 2880 x 2160 pixels 
3 MP (4:3): 2048 x 1536 pixels 
Video size—
HDV (1280 x 720 @ 30 fps)
VGA (640 x 480 @ 30 fps)
Recording limit —VGA: < 4 GB; HD: < 4 GB or < 29 mins.
Color modes—V i v i d  C o l o r,  F u l l  C o l o r,  B a s i c  C o l o r,  B l a c k  &  W h i t e ,  S e p i a
Sharpness modes—Sharp, Normal, Soft
Communication with computer—USB 2.0 high speed (PIMA 15740 protocol); 
via KODAK Camera USB Cable, Micro B / 5-Pin
Microphone—Ye s
Speaker—Ye s
PICTBRIDGE support—Ye s
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Appendix
www.kodak.com/go/support
 51
Power—KODAK Li-Ion Rechargeable Digital Camera Battery KLIC-7006; 5V AC
Tripod mount—1/4 inch
Size—99.8 x 57.1 x 23.9 mm (3.9 x 2.2 x 0.9 in.) @ power off
Weight—150 g (5.3 oz) with battery and card
Operating temperature—0–40
°C (32–104°F)
Care and maintenance
■If you suspect water has gotten inside the camera, remove the battery and card. 
Allow all components to air-dry for at least 24 hours before using the camera.
■Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft, 
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions 
unless designed specifically for camera lenses. Do not allow chemicals, such as 
suntan lotion, to contact painted surfaces.
■Service agreements may be available in your country. Contact a dealer of KODAK 
Products for more information.
■For digital camera disposal or recycling information, contact your local authorities. 
In the US, go to the Electronics Industry Alliance site at www.eiae.org or go to 
www.kodak.com/go/support.
Upgrading your software and firmware
We occasionally update KODAK Software and firmware (the software that runs on the 
camera). Download the latest versions: www.kodak.com/go/m583downloads.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							52www.kodak.com/go/support Appendix
Storage capacities
The LCD displays the approximate number of pictures (or minutes/seconds of video) 
remaining. Actual storage capacity varies depending on subject composition, card 
size, and other factors. You may be able to store more or fewer pictures and videos. 
Important safety instructions
CAUTION:
Do not disassemble this product; there are no user-serviceable parts 
inside. Refer servicing to qualified service personnel. KODAK AC Adapters 
and Battery Chargers are intended for indoor use only. The use of 
controls, adjustments, or procedures other than those specified herein 
may result in exposure to shock and/or electrical or mechanical hazards. If 
the LCD breaks, do not touch the glass or liquid. Contact Kodak customer 
support.
■The use of an accessory that is not recommended by Kodak may cause fire, electric 
shock, or injury. For approved accessories, go to www.kodak/go/accessories.
■Use only a USB-certified computer equipped with a current-limiting motherboard. 
Contact your computer manufacturer if you have questions.
■If using this product in an airplane, observe all instructions of the airline.
■When removing the battery, allow it to cool; it may be hot.
■Follow all warnings and instructions supplied by the battery manufacturer.
■Use only batteries approved for this product to avoid risk of explosion.
■Keep batteries out of the reach of children.
■Do not allow batteries to touch metal objects, including coins. Otherwise, a battery 
may short circuit, discharge energy, become hot, or leak.
■Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, 
or extreme temperature.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Appendix
www.kodak.com/go/support
 53
■Remove the battery when the product is stored for an extended period of time. In 
the unlikely event that battery fluid leaks inside the product, contact Kodak 
customer support.
■In the unlikely event that battery fluid leaks onto your skin, wash immediately with 
water and contact your local health provider. For additional health-related 
information, contact your local Kodak customer support.
■Go to www.kodak.com/go/reach for information about the presence of substances 
included on the candidate list according to article 59(1) of Regulation (EC) No. 
1907/2006 (REACH). 
■Dispose of batteries according to local and national regulations. Go to 
www.kodak.com/go/kes.
■Do not charge non-rechargeable batteries. For more information on batteries, go 
to www.kodak.com/go/batterychart.
Battery replacement, battery life
KODAK Li-Ion Rechargeable Digital Camera Battery KLIC-7006: 200 pictures per 
charge. Battery life per CIPA testing method. (Approximate number of pictures in 
Smart Capture mode, using a MicroSD Card.) Actual life may vary based on usage.
Extending battery life
■Use a power-saving LCD Brightness setting (see page 40).
■Charge the battery whenever necessary.
■Dirt on the battery contacts can affect battery life. Wipe the contacts with a pencil 
eraser before loading the battery in the camera.
■Battery performance is reduced at temperatures below 41° F (5° C). When using 
your camera in cold weather, carry spare batteries and keep them warm. Do not 
discard cold batteries that do not work; when they return to room temperature, 
they may be usable. 
Downloaded From camera-usermanual.com Kodak Manuals 
						

							54www.kodak.com/go/support Appendix
Limited warranty
Kodak warrants its digital cameras and accessories (excluding batteries) to be free 
from malfunctions and defects in both materials and workmanship for the warranty 
period specified on your KODAK Product packaging. Retain the original dated sales 
receipt. Proof of purchase date is required with any request for warranty repair. 
Limited warranty coverage
Warranty service is only available from within the country where the Products were 
originally purchased. You may be required to ship Products, at your expense, to the 
authorized service facility for the country where the Products were purchased. Kodak 
will repair or replace Products if they fail to function properly during the warranty 
period, subject to any conditions and/or limitations stated herein. Warranty service 
will include all labor as well as any necessary adjustments and/or replacement parts. If 
Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the 
purchase price paid for the Product provided the Product has been returned to Kodak 
along with proof of the purchase price paid. Repair, replacement, or refund of the 
purchase price are the sole remedies under the warranty. If replacement parts are 
used in making repairs, those parts may be remanufactured, or may contain 
remanufactured materials. If it is necessary to replace the entire Product, it may be 
replaced with a remanufactured Product. Remanufactured Products, parts and 
materials are warranted for the remaining warranty term of the original Product, or 90 
days after the date of repair or replacement, whichever is longer.
Limitations
This warranty does not cover circumstances beyond Kodak's control. This warranty 
does not apply when failure is due to shipping damage, accident, alteration, 
modification, unauthorized service, misuse, abuse, use with incompatible accessories 
or attachments (such as third party ink or ink tanks), failure to follow Kodak's 
operation, maintenance or repacking instructions, failure to use items supplied by 
Kodak (such as adapters and cables), or claims made after the duration of this 
warranty. Kodak makes no other express or implied warranty for this product. In the 
event that the exclusion of any implied warranty is ineffective under the law, the 
duration of the implied warranty will be the length of the express warranty period 
Downloaded From camera-usermanual.com Kodak Manuals