Kodak V600 Projector User Manual

Checking the Status
17
English
Checking the Status
The information displayed on the Status tab depends on the type of 
image source you use.
The Reset Lamp Hours feature is the only item that can be adjusted 
on this screen. Refer to the Lamp Hours Used when you want to 
know how much longer your lamp will last. Estimated lamp life 
expectancy is 2,000 to 4,000 hours.
Important:Only reset the lamp hours after you have installed a new 
lamp.
To reset lamp hours
1. Press Menu and use the Adjust + - buttons...

KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector 
18
Turning Off the Projector
Turn off the projector and image sources in the order listed here. 
Note: You might not be using all of these components for your 
presentation.
• Computer
•Projector
• Audio source if different from your video source or 
computer
• Video source such as VCR, DVD or digital camera. 
To turn off the projector:
1. Press the Power button on the keypad or remote control. 
A confirmation screen appears. 
2. Press...

Transporting the Projector
19
English
Transporting the Projector
When you place the projector in the carrying case make sure the lens 
is positioned inside the lens notch of the foam insert. Secure the 
projector with the velcro strap.
Important:The carrying case provided with the projector is not 
designed to be checked through baggage. If you can not 
hand carry this projector make sure it is packed properly to 
prevent damage. The warranty does not cover damage 
from improper handling.
A hard-sided...

KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector 
20
Maintenance
Changing the Lamp Module
Important:The lamp in the KODAK V600 Digital Projector and the 
KODAK V600 Zoom Digital Projector contains trace 
amounts of mercury. Some governments require special 
disposal of lamps containing mercury. Dispose of lamps in 
accordance with the law and any applicable local 
regulations.
The lamp module should be replaced with a certified replacement 
part. To order a new lamp, contact your local...

Maintenance
21
English
4. Lift up on the screw side of the lamp module door. Then 
carefully remove the lamp module cover.
5. Loosen the two slotted screws on the lamp module bracket.      
6. Gently lift and pull up on the metal wire to remove the lamp 
module.
&DXWLRQ RQRWWRXFKWKHJODVVSRUWLRQRIWKHQHZODPSPRGXOH
ZLWK\RXUKDQGVRUDOORZLWWRWRXFKRWKHUREMHFWVDVWKLV
PD\GDPDJHLWDQGVKRUWHQLWVRSHUDWLRQDOOLIH
&DXWLRQ RQRWGURSWKHODPSPRGXOHDVWKHJODVVPD\VKDWWHU...

KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector 
22
7. Carefully place the new lamp module into the projector, with the 
glass portion facing left. Make sure that it is inserted securely and 
that the two holes match the two pins of the inner engine case. 
Tighten the slotted screws.
8. Replace the lamp module door and tighten the screw.
9.Reset the lamp usage counter. See “To reset lamp hours” on 
page 17.
Important:The only time that you should reset the counter is after you 
have...

Maintenance
23
English
Cleaning the Air Filter
To ensure proper ventilation inside your multimedia projector, the air 
filter should be periodically cleaned. More frequent cleaning may be 
required if you use your projector in a dusty or dirty environment.
&DXWLRQ ,IWKHDLUILOWHULVQRWFOHDQHGSHULRGLFDOO\LWFDQEHFRPH
FORJJHGZLWKGXVWDQGSUHYHQWSURSHUYHQWLODWLRQ7KLV
PD\FDXVHRYHUKHDWLQJDQGGDPDJH
Important:If the filter cannot be cleaned or becomes damaged or 
torn, it should be...

KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector 
24
Tr o u b l e s h o o t i n g
If you don’t find the answer to your problem here, visit our Web site 
at www.kodak.com/go/projectors 
for the latest updates on 
troubleshooting.
Power Indicator
The power indicator on the keypad provides you with information 
about the condition of the projector. 
Light Status Condition
Blinking Lamp is off but live power cord is 
connected to the projector. 
Projector is in standby mode.
OR
Lamp is off...

Troubleshooting
25
English
Image Quality
Problem Solution 
Color or text is not being 
projected.Adjust the brightness up or down until 
the text is visible.
Some text or fonts are not 
sharp with a computer as an 
image source.For optimal results, set the computer’s 
resolution to 800 x 600. (Refer to your 
computer user manual.) But this projector 
can compress resolutions up to 
1024 x 768.
Image isnt centered on the 
screen. • Be sure that the projector is at a 90° 
angle to the screen.
• Reposition...

KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector 
26
Image appears flat with no 
contrastTo adjust the contrast:
1. Press Menu and use the Adjust + -
buttons to go to the Adjust tab.
2. Use the Next button to highlight 
Contrast.
3. Use the Adjust + - buttons to 
increase or decrease the contrast.
Image appears washed out or 
dark.• Check the projection lens to see if it 
needs cleaning. 
• To adjust the brightness:
1. Press Menu and use the Adjust + -
buttons to go to the Adjust tab....