Kyocera FS 1300D User Manual

ix
14. YOU ACKNOWLEDGE THAT YOU HAVE READ THISAGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY
ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE
BOUND BY ANY STATEMENT OR REPRESENTATION NOT
CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS
AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY
PROPERLY AUTHORIZED REPRESENTATIVES OF EACH PARTY.
BY OPENING THIS DISKETTE PACKAGE, YOU AGREE TO
ACCEPT THE TERMS AND CONDITIONS OF THIS AGREEMENT.
Downloaded From ManualsPrinter.com Manuals 

x
Safety Infor mation
Laser Notice
Radio Frequency Transmitter
This machine contains a transmitter module. We, the manufacturer 
(Kyocera Mita Corporation) hereby declare that this equipment (page 
printer), model FS-1100 and FS-1300D are in compliance with the 
essential requirements and other relevant provisions of Directive 
1999/5/EC.
Radio Tag Technology
In some countries, the radio tag technology used in this equipment to 
identify the toner container may be subject to authorization, and the use...

xi
Caution Labels
The printer bears any of the following labels.
Ozone Concentration
These printers generate ozone gas (O3), which may concentrate in the 
place of installation and cause an unpleasant smell. To minimize the 
concentration of ozone gas to less than 0.1ppm, we recommend you not 
to install the printer in a confined area where ventilation is blocked.
Laser inside the printer
(Laser radiation warning) Laser inside the printer
(Laser radiation warning)
FS-1300DFS-1100
Downloaded From...

xii
CE Marking Directive
Hereby, Kyocera Mita Corporation, declares that this page printer is in 
compliance with the essential requirements and other relevant 
provisions of Directive 1999/5/EC.
According to Council Directive 2004/108/EC, 2006/95/EC, and 1999/5/EC
Manufacturer: Kyocera Mit a Corporation Tamaki Plant
Manufacturer’s address: 704-19, Nojino, Tamaki-cho, Watarai-gun, Mie-
ken 519-0497, Japan
Declares that the product
Product name: Page Printer
Model number: FS-1100 and FS-1300D (as tested...

xiii
Energy Saving Function
This printer comes equipped with a Sleep Mode where printer function 
remains in a waiting state but power consumption is still reduced to a 
minimum when there is no activity with the printer within a set amount of 
time.
Sleep Mode
This printer automatically enters Sleep Mode when approximately 15 
minutes have passed since the printer was last used. The amount of 
time of no activity that must pass before Sleep Mode is activated may be 
lengthened.
Duplex Printing (For...

xiv
Symbols
The sections of this guide and parts of the machine marked with symbols 
are safety warnings meant to protect the user, other individuals and 
surrounding objects, and ensure correct and safe usage of the machine. 
The symbols and their meanings are indicated below.
The following symbols indicate that the related section includes safety 
warnings. Specific points of attention are indicated inside the symbol.
The following symbols indicate that the related section includes 
information on...

xv
Installation Precautions
Environment
Caution
Avoid placing the machine on or in locations which are unstable 
or not level. Such locations may cause the machine to fall down 
or fall over. This type of situation presents a danger of personal 
injury or damage to the machine.
Avoid locations with humidity or dust and dirt. If dust or dirt 
become attached to the power plug, clean the plug to avoid the 
danger of fire or electrical shock.
Avoid locations near radiators, heaters, or other heat sources,...

xvi
Power Supply/Grounding the Machine
Warning
Do not use a power supply with a voltage other than that 
specified. Avoid multiple connections in the same outlet. These 
types of situations present a danger of fire or electrical shock.
Plug the power cord securely into the outlet. If metallic objects 
come in contact with the prongs on the plug, it may cause a fire or 
electric shock.
Always connect the machine to an outlet with a ground 
connection to avoid the danger of fire or electrical shock in case...

xvii
Precautions for Use
Cautions when using the machine
Warning
Do not place metallic objects or containers with water (flower 
vases, flower pots, cups, etc.) on or near the machine. This 
situation presents a danger of fire or electrical shock should they 
fall inside. 
Do not remove any of the covers from the machine as there is a 
danger of electrical shock from high voltage parts inside the 
machine.
Do not damage, break or attempt to repair the power cord. Do not 
place heavy objects on the cord,...

xviii
If dust accumulates within the machine, there is a danger of fire or 
other trouble. It is therefore recommended that you consult with 
your service representative in regard to cleaning of internal parts. 
This is particularly effective if accomplished prior to seasons of 
high humidity. Consult with your service representative in regard 
to the cost of cleaning the internal parts of the machine.
Other precautions
Do not place heavy objects on the machine or cause other damage to 
the machine.
Do...