Kyocera KM 2035 User Manual

Preparations 
OPERATION GUIDE2-1
2 Preparations
This chapter explains the preparations required before using 
the copier.
• Loading Paper .............................................................. 2-2
Downloaded From ManualsPrinter.com Manuals 

Preparations 
2-2OPERATION GUIDE
Loading Paper
Paper can be loaded into the copier via the cassette or MP tray.
Before Loading Paper
When you open a new package of 
paper, fan through the sheets to 
separate them slightly prior to 
loading. If the paper is curled or 
folded, straighten it before 
loading. Paper that is curled or 
folded may cause paper jams.
IMPORTANT: If you copy onto used paper (paper already used for 
copying), do not use paper that is stapled or clipped together. This may 
damage the...

Preparations 
OPERATION GUIDE2-3 be set. (Refer to Inputting MP Tray Size and Media Type on page 2-7 and 
Inputting Custom Size on page 2-9.)
Loading Paper into the Cassette
Standard paper, recycled paper and colored paper can be loaded into the 
cassette. Up to 300 sheets of standard paper (80 g/m
2) or 100 sheets of 
thick paper (90 to 105 g/m
2) can be set. Sizes which can be loaded are: 
Ledger to Statement, Oficio 2, A3 to A5R and Folio.
IMPORTANT: When loading paper for the first time or when...

Preparations 
2-4OPERATION GUIDE
4Grasp the Length Size 
Adjustment tab and match the 
paper size to the Length Guide.
The paper sizes are impressed in 
the cassette.
IMPORTANT: When setting 
Ledger paper, move the length 
size adjustment tab to the right 
side end and push it down as 
shown in the illustration below.
5Set the paper straight from the 
upper part.
IMPORTANT: Be careful not to 
bend and crease the paper when 
inserting it into the cassette. 
Creases in the paper may lead to 
paper...

Preparations 
OPERATION GUIDE2-5 When the paper has become wrinkled from moisture, set the paper so that 
the wrinkled side is towards the Length Guide.
NOTE: When loading paper into the cassette, set it so that the side that 
is to be copied faces upwards.
6Set the accompanying paper 
sheet so that the paper size set in 
the cassette can be identified 
from the front of the cassette.
7Gently push in the cassette.
NOTE: When the copier will not be used for a long period of time, remove 
the paper from...

Preparations 
2-6OPERATION GUIDE
Setting paper on the MP tray
In addition to standard paper and recycled paper, special paper (45 to 160 
g/m
2) can also be set. 
Up to 50 sheets of standard (80 g/m
2) paper (25 sheets of Ledger R, Legal 
R or A3, B4, Oficio 2, Folio) can be set. The paper sizes that can be used 
are: Ledger R to Statement, A3 to B6R, A6R, Oficio 2, Cardstock, Folio R, 
8k, 16k, 16k R, Executive, ISO B5, Envelope #10, Envelope #9, Monarch, 
Envelope #6.75, Envelope C5, Envelope C4,...

Preparations 
OPERATION GUIDE2-7
2Adjust the paper width guide to 
the width of the paper to be set.
3Use the paper width guide to push 
the paper in until it reaches the 
point where it stops.
IMPORTANT: Always straighten out postcards and other types of thick 
paper that are curved before using them. There may be cases in which the 
feeding operation cannot be carried out due to the quality of the paper.
When loading paper into the MP Tray, set it so that the side which was 
facing upwards in its...

Preparations 
2-8OPERATION GUIDE
3Press U or V and select the paper size. The paper sizes displayed are as 
given in the table below.
 In the case of the selection of Other Standards 
or Custom Size, proceed to Inputting Other Standards on page 2-9 or 
Inputting Custom Size on page 2-9.
IMPORTANT: Use the illustration  
as a reference when setting the 
paper in the ## R in the MP Tray.
4Press [OK].
5Press U or V and select the media type. The media types displayed are 
as given below.Inch specifications...

Preparations 
OPERATION GUIDE2-9
6Press [OK]. The display will blink and the copier will return to the System 
menu.
7Press U or V to display 00.Setting done.
8Press [OK]. Copying can be begun.
Inputting Other Standards
1Select the Other Standards. (Refer to Inputting MP Tray Size and 
Media Type on page 2-7.)
2Press [OK].
3Press U or V and select the paper size. The paper size displayed are as 
given below.
Inch specifications
A3 R, A4 R, A4, A5 R, A6 R, B4 R, B5 R, B5, B6 R, Folio R, Oficio 
2,...

Preparations 
2-10OPERATION GUIDE
6Proceed to Step 4 (Inputting MP Tray Size and Media Type on page 2-7).
Selecting Special Media Types
Select the media type when copying on special types of paper such as 
thick paper (1) and vellum paper (2). When the media type has been 
selected, the copier will change the fixing temperature to match the paper.
1Press [Media Type] and select the media type. The indicator for the media 
type selected will light up.
2Proceed with the copying operation.
NOTE: When media...