Kyocera KM 3050 User Manual

							KM-3050
KM-4050
KM-5050
Downloaded From ManualsPrinter.com Manuals 
						

							Introduction
Thank you for your purchase of KM-3050/KM-4050/KM-5050.
This Operation Guide is intended to help you operate the machine 
correctly, perform routine maintenance and take a simple troubleshooting 
action as necessary, so that you can always use the machine in good 
condition.
Please read this Operation Guide before you start using the machine, and 
keep it close to the machine for easy reference.
In this Operation Guide, KM-3050, KM-4050 and KM-5050 are referred to 
as 30 ppm model, 40 ppm model and 50 ppm model respectively.
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATION GUIDEi
Legal and Safety Information
Please read this information before using your machine. This 
chapter provides information on the following topics.
• Legal Information.............................................................. ii
• Regarding Trade Names ................................................. iii
• Energy Star (ENERGY STAR
®) Program ........................ vi
• Safety Conventions in This Guide .................................. vii
• Caution Labels .............................................................. viii
• Installation Precautions................................................... ix
• Precautions for Use ......................................................... xi
• Laser Safety .................................................................. xiv
• Safety Instructions Regarding the Disconnection of 
Power ................................................................ xv
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
iiOPERATION GUIDE
Legal Information
Copying or other reproduction of all or part of this guide without the prior 
written consent of Kyocera Mita Corporation is prohibited.
Legal Restriction on Copying/Scanning
• It may be prohibited to copy/scan copyrighted material without 
permission of the copyright owner.
• It is prohibited under any circumstances to copy/scan domestic or 
foreign currencies.
• Local laws and regulations may prohibit or restrict copying/scanning of 
other items not mentioned above.
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
OPERATION GUIDEiii
Regarding Trade Names
• KPDL is a trademark of Kyocera Corporation.
• Microsoft, MS-DOS, Windows, Windows NT and Internet Explorer are 
registered trademarks of Microsoft Corporation in the U.S.A. and/or 
other countries.
• Windows Me and Window XP are trademarks of Microsoft 
Corporation.
• PCL is a trademark of Hewlett-Packard Company.
• Adobe Acrobat, Adobe Reader and PostScript are trademarks of 
Adobe Systems, Incorporated.
• Ethernet is a registered trademark of Xerox Corporation.
• Novell and NetWare are registered trademarks of Novell, Inc.
• Centronics is a trademark of Centronics Data Computer Corporation.
• IBM and IBM PC/AT are trademarks of International Business 
Machines Corporation.
• Power PC is a trademark of IBM in the U.S.A. and/or other countries.
• AppleTalk is a registered trademark of Apple Computer, Inc.
• CompactFlash and CF are trademarks of SanDisk, Inc.
• PC-PR201/65A is a product of NEC Corporation.
• VP-1000 is a product of Seiko Epson Corporation.
• This machine has been developed using embedded real-time 
operating system Tornado™ by Wind River Systems, Inc.
• PCL6, a command language of HP LaserJet emulated by this 
machine, is using the compatible system PeerelessPrintXL developed 
by Peerless Systems Corporation. PeerelessPrintXL is a trademark of 
Peerless Systems Corporation (2381 Rosecrans Ave. ElSegundo, CA 
90245, U.S.A.).
• TrueType is a registered trademark of Apple Computer, Inc.
• DFHSGOTHIC-W5 and DFHSMINCHO-W3 are Heisei fonts. Kyocera 
Mita Corporation is using these fonts under agreements with the 
Japanese Standards Association. Any form of reproduction of these 
fonts without prior consent of Kyocera Mita Corporation is prohibited.
• Heisei fonts have been developed by the working groups in 
collaboration with the Japanese Standards Association. Reproduction 
of these fonts without permission is prohibited.
• TypeBankG-B, TypeBankM-M and Typebank-OCR are trademarks of 
TypeBank
®.
• All European language fonts installed in this machine are used under 
licensing agreement with Monotype Imaging Inc.
• Helvetica, Palatino and Times are registered trademarks of Linotype-
Hell AG.
• ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC 
ZapfDingbats are registered trademarks of International Type-face 
Corporation.
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
ivOPERATION GUIDE • UFST™ MicroType
® fonts by Monotype Imaging Inc. are installed in 
this machine.
• This machine contains the NF module developed by ACCESS Co., 
Ltd.
• This machine contains the software having modules developed by 
Independent JPEG Group.
All other brands and product names are registered trademarks or 
trademarks of their respective companies. The designations ™ and ® will 
not be used in this Operation Guide.
GPL
Firmware of this machine is using in part the GPL applied codes 
(www.fsf.org/copyleft/gpl.html). Please access /www.kyoceramita.com/gpl 
for more information on how to make GPL applied codes available.
Monotype Imaging License Agreement
1Software shall mean the digitally encoded, machine readable, 
scalable outline data as encoded in a special format as well as the 
UFST Software.
2You agree to accept a non-exclusive license to use the Software to 
reproduce and display weights, styles and versions of letters, 
numerals, characters and symbols (Typefaces) solely for your own 
customary business or personal purposes at the address stated on 
the registration card you return to Monotype Imaging. Under the 
terms of this License Agreement, you have the right to use the Fonts 
on up to three printers. If you need to have access to the fonts on 
more than three printers, you need to acquire a multi-user license 
agreement which can be obtained from Monotype Imaging. 
Monotype Imaging retains all rights, title and interest to the Software 
and Typefaces and no rights are granted to you other than a License 
to use the Software on the terms expressly set forth in this 
Agreement.
3To protect proprietary rights of Monotype Imaging, you agree to 
maintain the Software and other proprietary information concerning 
the Typefaces in strict confidence and to establish reasonable 
procedures regulating access to and use of the Software and 
Typefaces.
4You agree not to duplicate or copy the Software or Typefaces, except 
that you may make one backup copy. You agree that any such copy 
shall contain the same proprietary notices as those appearing on the 
original.
5This License shall continue until the last use of the Software and 
Typefaces, unless sooner terminated. This License may be 
terminated by Monotype Imaging if you fail to comply with the terms 
of this License and such failure is not remedied within thirty (30) days 
after notice from Monotype Imaging. When this License expires or is 
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
OPERATION GUIDEv terminated, you shall either return to Monotype Imaging or destroy all 
copies of the Software and Typefaces and documentation as 
requested.
6You agree that you will not modify, alter, disassemble, decrypt, 
reverse engineer or decompile the Software.
7Monotype Imaging warrants that for ninety (90) days after delivery, 
the Software will perform in accordance with Monotype Imaging-
published specifications, and the diskette will be free from defects in 
material and workmanship. Monotype Imaging does not warrant that 
the Software is free from all bugs, errors and omissions.
The parties agree that all other warranties, expressed or implied, 
including warranties of fitness for a particular purpose and 
merchantability, are excluded.
8Your exclusive remedy and the sole liability of Monotype Imaging in 
connection with the Software and Typefaces is repair or replacement 
of defective parts, upon their return to Monotype Imaging.
In no event will Monotype Imaging be liable for lost profits, lost data, 
or any other incidental or consequential damages, or any damages 
caused by abuse or misapplication of the Software and Typefaces.
9Massachusetts U.S.A. law governs this Agreement.
10You shall not sublicense, sell, lease, or otherwise transfer the 
Software and/or Typefaces without the prior written consent of 
Monotype Imaging.
11Use, duplication or disclosure by the Government is subject to 
restrictions as set forth in the Rights in Technical Data and Computer 
Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or 
subparagraph (c)(1)(ii), as appropriate. Further use, duplication or 
disclosure is subject to restrictions applicable to restricted rights 
software as set forth in FAR 52.227-19 (c)(2).
12You acknowledge that you have read this Agreement, understand it, 
and agree to be bound by its terms and conditions. Neither party 
shall be bound by any statement or representation not contained in 
this Agreement. No change in this Agreement is effective unless 
written and signed by properly authorized representatives of each 
party. By opening this diskette package, you agree to accept the 
terms and conditions of this Agreement.
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
viOPERATION GUIDE
Energy Star (ENERGY STAR®) Program
We have determined as a participating company in the International 
Energy Star Program that this machine is compliant with the standards laid 
out in the International Energy Star Program.
International Energy Star Program has as its basic goals the promotion of 
efficient energy use and the reduction of the environmental pollution that 
accompanies energy consumption by promoting the manufacture and sale 
of products that fulfill program standards.
International Energy Star Program standards require that multi-function 
machines come equipped with a Low Power Mode where energy 
consumption is reduced after a certain amount of time elapses since the 
machine was last used, as well as an Off Mode where the machine 
automatically turns itself off after there is no activity within a set amount of 
time. When the machine includes printer and fax functions, the printer and 
fax must enter a Low Power Mode where power consumption is 
automatically reduced after a certain amount of time elapses since they 
were last used, and they must also support a Sleep Mode where power 
consumption is reduced to a minimum when there is not activity within a 
set amount of time.
This machine is equipped with the following features as a result of its 
compliance with International Energy Star Program standards.
This machine has a Sleep Mode only to attain further savings of energy.
Sleep
The machine automatically enters Sleep when 10 minutes (30 and 40 ppm 
models) or 15 minutes (50 ppm model) have passed since the machine 
was last used. The amount of time of no activity that must pass before 
Sleep is activated may be lengthened. For more information refer to Sleep 
and Auto Sleep on page 3-4.
Automatic 2-Sided Copy Functions
The Energy Star Program encourages the use of 2-sided copying which 
reduces the load on the environment and this machine includes 2-sided 
copying as a standard function. For example, by copying two 1-sided 
originals onto a single sheet of paper as a 2-sided copy, it is possible to 
lower the amount of paper used. For more information refer to Duplex 
Copying on page 3-13.
Paper Recycling
The Energy Star Program encourages the use of environmentally friendly 
recycled paper. Your sales or service representative can provide 
information about recommended paper types.About the International Energy Star Program
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
OPERATION GUIDEvii
Safety Conventions in This Guide
The sections of this guide and parts of the machine marked with symbols 
are safety warnings meant to protect the user, other individuals and 
surrounding objects, and ensure correct and safe usage of the machine. 
The symbols and their meanings are indicated below.
Symbols
The U symbol indicates that the related section includes safety warnings. 
Specific points of attention are indicated inside the symbol.
The   symbol indicates that the related section includes information on 
prohibited actions. Specifics of the prohibited action are indicated inside 
the symbol.
The z symbol indicates that the related section includes information on 
actions which must be performed. Specifics of the required action are 
indicated inside the symbol.
Please contact your service representative to order a replacement if the 
safety warnings in this Operation Guide are illegible or if the guide itself is 
missing (fee required).WARNING: Indicates that serious injury or even death may result 
from insufficient attention to or incorrect compliance with the 
related points.
CAUTION: Indicates that personal injury or mechanical damage 
may result from insufficient attention to or incorrect compliance 
with the related points.
.... [General warning]
.... [Warning of danger of electrical shock]
.... [Warning of high temperature]
.... [Warning of prohibited action]
.... [Disassembly prohibited]
.... [Alert of required action]
.... [Remove the power plug from the outlet]
....[Always connect the machine to an outlet with a ground 
connection]
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
viiiOPERATION GUIDE
Caution Labels
Caution labels have been attached to the machine at the following 
locations for safety purposes. Be sufficiently careful to avoid fire or electric 
shock when removing a paper jam or when replacing toner.
Do not attempt to incinerate the toner 
container or the waste toner box. 
Dangerous sparks may cause burns.
NOTE: Do not remove these labels.The area indicated in the 
label carries high 
temperature. Do not 
touch parts in this area, 
because there is a danger 
of getting burned. The area indicated in the label 
carries high voltage. Never 
touch parts in this area, because 
there is a danger of electric 
shock.The area indicated in the 
label carries high 
temperature. Do not 
touch parts in this area, 
because there is a danger 
of getting burned.
Moving parts inside. Do not 
touch parts in this area, 
because there is a danger of 
injury.
Downloaded From ManualsPrinter.com Manuals