Kyocera KM 4800w User Manual
Here you can view all the pages of manual Kyocera KM 4800w User Manual. The Kyocera manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 11
10 8. Confirm that “KM-4800w TCP/IP Port” is displayed in the list. Click “Close”. Adding “KM-4800w TCP/IP Port” is completed. Downloaded From ManualsPrinter.com Manuals
Page 12
11 1.3. Add Printer 1. In “Devices and Printers”, click “Add a printer”. 2. Choose “Add a local printer”. Downloaded From ManualsPrinter.com Manuals
Page 13
12 3. Choose “Use an existing port:” and then select “KM-4800w:192.168.100.10 (KM- 4800w TCP/IP Port)” in the pull down menu. Click “Next”. 4. Click “Have Disk”. Downloaded From ManualsPrinter.com Manuals
Page 14
13 5. Click “Browse”. 6. Specify “K48PREN.INF” at “(the optical drive)\Software\PrinterDriver\EN\” Click “Open”. English: specify \Software\PrinterDriver\EN\ K48PREN.INF French: specify \Software\PrinterDriver\FR\ K48PRFR.INF German: specify \Software\PrinterDriver\DE\ K48PRDE.INF Italian: specify \Software\PrinterDriver\IT\ K48PRIT.INF Spanish: specify \Software\PrinterDriver\ES K48PRES.INF Downloaded From ManualsPrinter.com Manuals
Page 15
14 7. Click “OK”. 8. Click “Next”. Downloaded From ManualsPrinter.com Manuals
Page 16
15 9. If KM-4800w Printer Driver is already installed on your system, the following screen appears. Select “Replace the current driver” and click “Next”. 10. Printer name can be changed at your option. Click “Next”. Downloaded From ManualsPrinter.com Manuals
Page 17
16 11. Check “Always trust software from “KYOCERA MITA Corporation”.” and click “Install”. 12. Click “Finish”. Downloaded From ManualsPrinter.com Manuals
Page 18
17 13. Confirm that “KM-4800wEN” is added in “Printers and Faxes”. Installation of printer has been finished. Downloaded From ManualsPrinter.com Manuals
Page 19
18 1.4. About Printer Port In “Devices and Printers”, select “KM-4800wEN” and click “Print server properties”. Open “Ports” and then click “Change Port Settings”. Downloaded From ManualsPrinter.com Manuals
Page 20
19 Select “KM-4800w TCP/IP Port” and then click “Configure Port”. The following information is indicated. You do not have to change any of the above settings in usual case. Change these settings when KM-4800w does not wake up correctly from the Power Save Mode caused by the network settings. MAC Address: MAC Address of output printer Broad Cast Address: An address used to send the data to all PC on the network Magic Boot Port: Port number to send the data Timeout: Timeout when no...