Kyocera KM C2525E User Manual

ix
Regarding Tradenames
• PRESCRIBE and ECOSYS are registered trademarks of Kyocera Corporation.
• KPDL is trademark of Kyocera Corporation.
• Windows and Windows Server are registered trademarks of Microsoft Corporation.
• Windows NT is a trademark of Microsoft Corporation.
• PCL and PJL are registered trademarks of Hewlett-Packard Company.
• Adobe, Adobe Acrobat and Adobe Reader are registered trademarks of Adobe Systems 
Inc.
• PowerPC is a trademark of International Business Machines Corporation.
•...

x
Energy Saving Control Function
The device comes equipped with a Low Power Mode where printer and fax functions remain in a 
waiting state but energy consumption is still reduced after a certain amount of time elapses 
since the device was last used, as well as a Sleep Mode where printer and fax functions remain 
in a waiting state but power consumption is still reduced to a minimum when there is no activity 
with the device within a set amount of time.
Low Power Mode
The device automatically enters Low...

xi
Safety Conventions in This Guide
Please read this Operation Guide before using the machine. Keep it close to the machine 
for easy reference.
The sections of this guide and parts of the machine marked with symbols are safety warnings 
meant to protect the user, other individuals and surrounding objects, and ensure correct and 
safe usage of the machine. The symbols and their meanings are indicated below.
Symbols
The   symbol indicates that the related section includes safety warnings. Specific points...

xii
Caution Labels
Caution labels have been attached to the machine at the following locations for safety purposes. 
Be sufficiently careful to avoid fire or electric shock when removing a paper jam or when 
replacing toner.
NOTE: Do not remove these labels.
Label 1, 2
High temperature inside. Do not 
touch parts in this area, 
because there is a danger of 
getting burned.
Downloaded From ManualsPrinter.com Manuals 

xiii
Installation Precautions
Environment
Caution
Avoid placing the machine on or in locations which are unstable or not level. Such 
locations may cause the machine to fall down or fall over. This type of situation presents 
a danger of personal injury or damage to the machine.
Avoid locations with humidity or dust and dirt. If dust or dirt become attached to the 
power plug, clean the plug to avoid the danger of fire or electrical shock.
Avoid locations near radiators, heaters, or other heat sources,...

xiv
Small amounts of ozone and other chemicals are released during copying, but the quantities do 
not present any health risk to humans. If, however, the machine is used over a long period of 
time in a poorly ventilated room or when making an extremely large number of copies, the smell 
may become unpleasant. To maintain the appropriate environment for copy work, it is suggested 
that the room be properly ventilated.
Do not install this machine beneath fluorescent lights. The original size may be...

xv
If anything harmful (paper clips, water, other fluids, etc.) falls into the machine, turn the 
main power switch off ({ position) immediately. Next, be absolutely certain to remove the 
power plug from the outlet to avoid the danger of fire or electrical shock. Then contact 
your service representative.
Do not remove or connect the power plug with wet hands, as there is a danger of 
electrical shock.
Always contact your service representative for maintenance or repair of internal parts.
Caution
Do not...

xvi
Cautions when handling consumables
Caution
Do not attempt to incinerate the toner container or the waste toner box. Dangerous 
sparks may cause burns.
Keep the toner container and the waste toner box out of the reach of children.
If toner happens to spill from the toner container or the waste toner box, avoid inhalation 
and ingestion, as well as contact with your eyes and skin.
• If you do happen to inhale toner, move to a place with fresh air and gargle thoroughly 
with a large amount of water. If...

xvii
Laser Safety (Europe)
Laser radiation could be hazardous to the human body. For this reason, laser radiation emitted 
inside this machine is hermetically sealed within the protective housing and external cover. In 
the normal operation of the product by user, no radiation can leak from the machine.
This machine is classified as Class 1 laser product under IEC 60825.
Caution: Performance of procedures other than those specified in this manual may result in 
hazardous radiation exposure.
These labels...

xviii
Safety Instructions Regarding the Disconnection of Power
Caution: The power plug is the main isolation device! Other switches on the equipment are only 
functional switches and are not suitable for isolating the equipment from the power source.
VORSICHT: Der Netzstecker ist die Hauptisoliervorrichtung! Die anderen Schalter auf dem 
Gerät sind nur Funktionsschalter und können nicht verwendet werden, um den Stromfluß im 
Gerät zu unterbrechen.
DECLARATION OF CONFORMITY
TO
89/336/EEC, 73/23/EEC,...