Kyocera KM C4035E User Manual

Preparation for Usage
2-9
2Press [Machine Default]. 
3Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the 
25/25 ppm model, 3200 for the 32/25 and 32/32 ppm models and 4000 for the 40/35 ppm model.
If the correct management code has been entered, the Machine Default screen will be displayed. 
NOTE: If the optional security kit has been installed, the management code is 8 digits long. The 
default setting is 25002500 for the 25/25 ppm model, 32003200 for the...

Preparation for Usage
2-10
Specifying the Paper Size to the MP Tray
Specify the paper size when using the MP tray.
The following paper sizes are available.
Auto Detect
The paper size is automatically detected. Select between [Centimeter] ([Centimetre]) and [Inch] 
measurement units. 
1Press the System Menu/Counter key.
2Press [MP tray Setting].  Setting method Unit Paper size
Auto Detect Inch 11 × 17, 8
1/2×14, 11×81/2, 81/2×11, 51/2×81/2
Centimeter A3, B4, A4, A4R, B5, B5R, A5R, B6R, A6R
Other Standard...

Preparation for Usage
2-11
3Press [Auto Detection]. 
4Select [Centimeter] ([Centimetre]) or [Inch]. 
5Press [Close]. The display returns to the [Basic] screen.
Other Standard Sizes
Specify special standard sizes.
1Press the System Menu/Counter key. 
2Press [MP tray Setting]. 
3Press [Others Standard] and press 
[Select size].
4Select the paper size.
5Press [Close]. 
MP tr a y  Se tti ng
AutoBa ck
System Menu / Counter
Input size
Other s
Standar dPaper  Si ze Paper  Ty pe
Pl ai n
Ce nti me te r
Inch Unit...

Preparation for Usage
2-12
6Press [Close]. The display returns to the [Basic] screen.
Input Size
Specify the required paper size.
1Press the System Menu/Counter key. 
2Press [MP tray Setting]. 
3Press [Input size]. 
4Press [+] and [–] to set the Y (height) and X (width) sizes. 
With the metric models, you may enter the size directly using the numeric keys by pressing 
[#-Keys].
5Press [Close]. The display returns to the [Basic] screen.
System Menu / Counter
Sy stem Menu
Defaul t Co p y
Language
Acco u...

Preparation for Usage
2-13
Custom Size
Store frequently used paper sizes as custom sizes. Also, the paper type can be set for each custom 
size. 
Assignment Method
1Press the System Menu/Counter key.
2Press [Machine Default]. 
3Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the 
25/25 ppm model, 3200 for the 32/25 and 32/32 ppm models and 4000 for the 40/35 ppm model.
If the correct management code has been entered, the Machine Default screen will be displayed....

Preparation for Usage
2-14
6Press [On] and press [+] or [–] to set the 
Y (Length) and X (Width) sizes. 
With the metric models, you may enter 
the size directly using the numeric keys 
by pressing [#-Keys].
To specify a paper type, press [Select 
Paper Type]. Select the paper type and 
press [Close]. 
7Press [Close]. 
8Press [Close]. 
9Press [End]. The display returns to the [Basic] screen.
Setting Method
1Press the System Menu/Counter key. 
2Press [MP tray Setting]. 
3Press [Others Standard] and press...

Preparation for Usage
2-15
6Press [Close]. The display returns to the [Basic] screen.
Specifying the Paper Type to the MP Tray
Set the paper type when using the MP tray.
The following paper types are available.
Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted, Bond, Cardstock, Color 
(Colour), Prepunched, Letterhead, Thick paper, Envelope, Coated, High Quality, Custom 1 - 8
NOTE: Paper type cannot be changed for MP tray paper size when a Custom size has been 
selected that has already set...

Preparation for Usage
2-16
Placing Originals
This section explains how to place an original for copying or scanning. 
Loading Originals on the Platen 
Open the original platen and place the original on the platen. You may also place non-sheet 
originals such as books or magazines. 
1Open the original platen. 
NOTE: If the optional document processor has been 
installed, open the document processor. Before 
opening the document processor, be sure that there 
are no originals left on the original tray or...

Preparation for Usage
2-17
(Metric models)
3Close the original platen. 
IMPORTANT: Do not push the original platen or document processor forcefully when you close it. 
Excessive pressure may crack the platen glass.
Shadows may appear around the edges and in the middle of copies of open-faced originals such as 
books.
Caution: Do not leave the document processor open as there is a danger of 
personal injury.
Downloaded From ManualsPrinter.com Manuals 

Preparation for Usage
2-18
Loading Originals in the Document Processor (option)
Use the optional document processor to automatically read multi-page originals one page at a time. 
Also automatically turn over and read both sides of two-sided originals. 
The document processor supports the following types of originals.
Precautions on Types of Originals for Document Processor 
Do not use the document processor for the following types of originals. Additionally, if originals have 
punched holes or...