LaCie 319 Users Manual

1. Package Contents
page 11
LaCie 319 LCD Monitor
User’s Manual
1. Package Contents
Your LaCie 319 LCD monitor should ship with the following:
LaCie 319 LCD Monitor with tilt/swivel/pivot/height adjust stand
Power cords 
Video signal cable (15pin mini DSUB male to DVIA)
Video signal cable (DVID to DVID cable)Cable cover
CD ROM (includes complete User’s Manual in PDF format)
Pivot Software CD
blue eye pro calibration Software CD
Important Info:Please keep your box. In the event that he LaCie 319 LCD...

2. Quick Start
page 12
LaCie 319 LCD Monitor
User’s Manual
2. Quick Start
To attach the LaCie LCD Monitor to your system, follow these instructions:
1. Turn off the power to your computer.2. 
For the PC or MAC with DVI digital output:Connect the DVI signal cable to the connector of the display card in your
system (Figure A.1). Tighten all screws.
For the PC with Analog output:Connect the 15pin mini DSUB to DVIA signal cable to the connector of the display
card in your system (Figure A.2).
For the...

2. Quick Start
page 13
LaCie 319 LCD Monitor
User’s Manual
using the front button. DO NOT switch on/off repeatedly.
NOTE:For the MAC with digital output: Before turning on the MAC, the DVI Input mode must be set to DIGITAL in
“DVI SELECTION” of OSM by pressing “SELECT” button then “CONTROL” button when the DVI signal cable is
connected to the DVII connector (Input1) of the monitor. Otherwise the MAC may not turn on.
6. Turn on the computer. Notouch Auto Adjust automatically adjusts the monitor to optimal...

3. Your LaCie 319 LCD Monitor
page 14
LaCie 319 LCD Monitor
User’s Manual
Raise and Lower Monitor Screen
The monitor may be raised or lowered in either Portrait or Landscape mode.
To raise or lower screen, place hands on each side of the monitor and gently lift or lower to the desired height (Figure RL.1).
Screen Rotation
Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching your
fingers.
To raise the screen, place hands on each side of the...

3. Your LaCie 319 LCD Monitor
page 15
LaCie 319 LCD Monitor
User’s Manual
Tilt Swivel
Grasp top and bottom sides of the monitor screen with your Grasp both sides of the monitor screen with your hands
hands and adjust the tilt as desired (Figure TS.1). and adjust the swivel as desired (Figure TS.2).
NOTE:Handle with care when tilting the monitor screen.
NOTE:If the tilt function is not available, rotate the screen 90° clockwise until you hear one click.
Remove Monitor Stand for Mounting
To prepare the...

3.1 Controls
page 16
LaCie 319 LCD Monitor
User’s Manual
3.1. Controls 
IMPORTANT: If you perform colorcritical work, please bear in mind that manually altering the settings of your display could
significantly disturb the accuracy of the colors you display and undermine the benefits of your colormanaged environment.
LaCie recommends that you not manually modify any Brightness/Contrast controls or the behavior of the Color ControlSystem.
OSM (OnScreen Manager) control buttons on the front of the monitor...

3.1 Controls
page 17
LaCie 319 LCD Monitor
User’s Manual
AUTO BRIGHTNESS
Please keep this function OFF at all times if you are performing colorcritical work.
1: Adjusts the brightness automatically, by detecting the brightness level of your environment and adjusting
the monitor with the best BRIGHTNESS setting*1.
2:  Adjusts the brightness automatically for the best BRIGHTNESS setting based on the white display area.
The environmental brightness sensor has no function.
OFF:No function. LaCie recommends...

3.1 Controls
page 18
LaCie 319 LCD Monitor
User’s Manual
Color Control Systems
These options provide manual access to certain settings that influence the colorimetric behavior of your display. If you are per
forming colorcritical work, LaCie recommends that you not manually modify the settings of these functions, as your LaCie
blue eye pro calibration software takes care of this precisely and automatically in accordance to your desired color settings.
Modifying any of these settings manually would...

3.1 Controls
page 19
LaCie 319 LCD Monitor
User’s Manual
VIDEO DETECT: Selects the method of video detection when more than one computer is connected.
FIRST DETECT: The video input has to be switched to “FIRST DETECT” mode. When current video input signal is not 
present, the monitor searches for a video signal from the other video input port. If the video signal is present in 
the other port, the monitor switches the video source input port to the new found video source automatically. The 
monitor will...

3.1 Controls
page 20
LaCie 319 LCD Monitor
User’s Manual
OSM LOCK OUT:This control completely locks out access to all OSM control functions. When attempting to activate
OSM controls while in the Lock Out mode, a screen will appear indicating the OSM controls are locked out.
There are three types of OSM LOCK OUT:
OSM LOCK OUT with BRIGHTNESS and CONTRAST control: To activate the OSM Lock Out function, press SELECT, then “+”
key and hold down simultaneously. To deactivate the OSM Lock Out, press SELECT,...