Land Rover D A P Accessory Catalog For All Vehicles Dap Manual

							D.A.P. Enterprises is pleased to present it’s latest accessories catalog. 
In it you will find items to fit the newest Land Rover vehicles, as well as
the early models. We have included functional products as well as 
dress-up items, which will please any Rover owner. 
You can personalize your already unique Land Rover with our wide range
of accessories. In addition to the accessories, we also stock a full range
of replacement parts, both genuine and O.E.M.
Our goal at 
D.A.P.is to offer top quality parts at the best possible prices.
In a word, we sell value. You may occasionally find a similar part at a
lower price. Chances are it hasnt been tested for durability and integrity.
A cheap part that fails early is less than a bargain, and certainly not a
value. By the same token, an expensive part, boxed in a pretty green and
white package, is no value when an identical part of the same quality
can be had for less.
The majority of our inventory is from Original Equipment 
Manufacturers. These are the same companies that make the parts for
Land Rover. By buying direct from the manufacturer we avoid paying the
higher prices that the “Land Rover brand” demands. In some cases we
have found an after-market item whose quality and integrity actually
surpasses the original.
We want your business and we try very hard to supply you with
the best products available.
Enterprises LLC.
Copyright © 2001 D.A.P. Enterprises LLC. 
						

							Accessories from                  Enterprises llc.
Toll free order line  800-955-2818 1
Ordering Information
The best way to place your order is by phone, this assures accurate
determination of your parts needs. In order for us to properly fill your order,
please be prepared to give the year, model, engine type, and any unusual
characteristics about your vehicle. In some cases we may need to ask for the
Vehicle Identification Number (VIN) or engine number of your Rover.
Phone orders placed by 3PM E.S.T. will be shipped the same day via UPS,
or the next day if going by common carrier. Please see the shipping
information section for details.
Special order parts require prepayment in full.
PricingAll prices are subject to change without notice. Shipping charges are not
included in parts prices.
Payment MasterCard, VISA, and Discover are accepted at D.A.P. Orders over $500
require a signature via fax. UPS C.O.D. orders must be paid with a certified
check or Postal money order. Prior authorization is required for us to accept
personal or company checks. Out-of-State personal checks over $200 will
not be accepted.
WarrantyAll of our products are manufactured to the highest quality standard and are
subject to rigid quality controls. Occasionally a problem may arise. Our parts
are guaranteed to be free from defects in materials and workmanship for a
period of 12 months from date of purchase, with the exception of electrical
parts. Failure due to abuse, neglect, improper installation, normal wear and
tear, or the failure of a related part is not covered by this warranty and is not
the liability of D.A.P. Enterprises LLC. This warranty applies only to the
defective part and does not cover associated parts or labor. All parts are
subject to inspection before a replacement will be sent.
Returns and ExchangesThere are no returns for any reason after 30 days unless the part is defective.
All returned items must have a Return Authorization number which can be
obtained by calling 802/885-6660. You must call for a Return Authorization
number prior to returning part or the package will be refused.
All returns must have Return Authorization number printed clearly on the
outside of the shipping container.
All returns must be postage pre-paid. Shipping charges are non-refundable.
Items must be returned unused and in original packaging.
Special order parts, electrical components, and manuals can not be returned. 
Refund: Credit for returns will be automatically applied as credit on account
at D.A.P. ENTERPRISES LLC, unless otherwise specified. A 15% re-stocking
fee will be assessed on all returns unless defective.
Defective items will be replaced upon return and inspection of the defective
part.
Cores for re-manufactured parts must be returned within 30 days in the
original package with core tags attached. All cores must be fully assembled
and without external damage.
Reimbursement for cores not returned in 30 days will be refunded at 50% of
core value.
Should you receive a damaged package the carrier must be notified at the
time of delivery in order to file a damage claim.
Shipping MethodsThe majority of our orders are shipped via United Parcel Service. We have
found this method to be reliable, timely, and very satisfactory to our
customers. Orders are shipped via UPS Ground Service unless otherwise
specified. All normal UPS services are available (Next Day Air, 2nd Day Air,
etc.). If the destination is beyond the contiguous 48 states, special conditions
apply. Call for details.
Large items such as engines or nudge bars are shipped by common carrier.
The company chosen is dependant upon the destination. We can furnish an
estimate of shipping charges at the time of your order. Most motor freight
companies charge an additional fee for residential deliveries. If you can
furnish a commercial address for delivery, you can save yourself some money.
Contents
Brush Bars & Winch Bumpers  2~8
Lamp Guards  9~11
Side Steps  12~14
Exterior Accessories  15~17
Interior Accessories  18~20
Suspension & Driveline  21~23
Protection Items  24~27
Winches & Jacks  28~29
Roof Racks 30
Miscellaneous 31
Enterprises LLC.
Accessory
Catalog
for all 
land rover
vehicles 
						

							BA 003-IMPACT
Impact Absorbing Nudge Bar
This heavy-duty bar gives effective protection to your vehicle.
It utilizes a torsion bar system and has been extensively
tested to reduce damage from low-speed impacts. Hinged
lamp guards are included. Finished in a beautiful black nylon
coating for lasting protection. Mounts to frame using existing
bumper hardware. Optional center grill section available.
Fits Range Rover Classic 1987-1994
BA 096
Steel Wrap-around Nudge Bar
Steel wrap-around nudge bar with hinged lamp guards.
Finished in a beautiful black nylon coating for lasting
protection. Mounting plate facilitates easy auxiliary light
mounting. Mounts to frame using existing bumper hardware. 
Fits Range Rover Classic 1987-1994
BA 004
Rear Nudge Bar / Load Carrier
Hinged rear bar provides protection when in upright position.
Folds down to provide access to tailgate or carry up to 220
lbs. Heavy 14 gauge steel, 1
1/2 tube is finished in a durable
nylon coating. 
Fits Range Rover Classic 1987-1995
STC8500AA
Genuine Range Rover Brush Bar
Fits Range Rover 4.0/4.6 1995-2001
Range Rover * Discovery * Defender * Freelander
www.DAP-INC.comManufacturer part numbers are used for reference only2
Bars have not been tested with SRS systems, 
and may affect SRS operation.
! 
						

							BA 142
‘A’ Frame Nudge Bar
Popular A-frame type nudge bar and spoiler protector has
facility for mounting auxiliary lights. Made from 2 tubing and
nylon coated for lasting protection.
Fits Range Rover 4.0/4.6 1995-2001
BA 142S
Stainless Steel 
‘A’ Frame Nudge Bar
As above but made of polished stainless steel
Fits Range Rover 4.0/4.6 1995-2001
BA 106B 
Discovery Nudge Bar
with Integral Sump Guard
A stylish bar with integral sump guard and spoiler protection.
Constructed from 11/2 tube and nylon coated. Features
removable lamp guards and tabs for auxiliary light mounting.
No cutting of the front spoiler is necessary.
Fits Discovery 1994-98.
Genuine Discovery Brush Bar
As supplied in the UK.
STC8930 – Fits Discovery 1994-98
STC50020 – Fits Discovery II 1999-2001
BA 118 Discovery ‘A’ Frame Bar
A-frame bar manufactured in sturdy 2 tube, with 31/2 wide
spot-light mounting plate and integral sump protector. Nylon
coated for a durable finish. No drilling required
Fits Discovery 1994-98
Accessories from                  Enterprises llc.
Toll free order line  800-955-2818 3
Bars have not been tested with SRS systems, 
and may affect SRS operation.
!
BA 142S
BA 106B
STC8930
BA 118
BA 142 
						

							BA 101 
Discovery II Wrap-around Nudge Bar
Coated in durable nylon, this great looking bar provides
protection for your Discovery II.
BA 101S 
Discovery II Stainless Nudge Bar
Made from high quality stainless steel tube. Polished to a
mirror finish this great looking bar provides protection for your
Discovery II.
(no photo available at time of printing)
BA 102
Discovery II 
‘A’ Frame Nudge Bar
A-frame bar manufactured in sturdy 2 tube, with 31/2 wide
spot-light mounting plate. Black nylon coated for a durable
finish.
(no photo available at time of printing)
BA 102S
Stainless 
‘A’ Frame Nudge Bar
A-frame bar manufactured in sturdy 2 tube, with 31/2 wide
spot-light mounting plate. Made from high quality stainless
steel tube, and polished to a mirror finish.
Fits Discovery II.
(no photo available at time of printing)
Range Rover * Discovery * Defender * Freelander
www.DAP-INC.comManufacturer part numbers are used for reference only4
Bars have not been tested with SRS systems, 
and may affect SRS operation.
! 
						

							BA 005 
Classic Bull Bar
Constructed from heavy 14 gauge, 11/2 tube. Nylon coated
for long-lasting protection. Includes fixed lamp guards and
provision for mounting auxiliary lamps (lamps not included)
Fits Defender and Series Land Rover models.
BA 006 
Fold Down Nudge Bar
Similar to BA 005 but is able to fold down to load carrying
position with special hinged bumper fixings. Includes integral
lamp guards and provision for mounting auxiliary lamps
(lamps not included)
Fits Defender and Series Land Rover models.
BA 002/C2 
Wrap-around Nudge Bar
Constructed from heavy 14 gauge, 11/2 tube in a popular
wrap-around design. Nylon coated for long-lasting protection.
Includes fixed lamp guards and provision for mounting
auxiliary lamps. (photo shows optional winch mount, not
included – see page 57)
Fits Defender and Series Land Rover models.
BA 119 
‘A’ Frame Nudge Bar
A robust A-frame bar for Defender and Series Land Rover
models, constructed from 2 diameter, 14 gauge steel.
Features a provision for mounting auxiliary lamps (lamps not
included) Mounts on the 4 existing bumper bolts for Defender,
with a further 4 holes drilled in bumper for an extra sturdy
fitting. For Series Land Rovers fitting 8 holes need to be
drilled.
Accessories from                  Enterprises llc.
Toll free order line  800-955-2818 5
Bars have not been tested with SRS systems, 
and may affect SRS operation.
! 
						

							BA 119S 
Stainless 
‘A’ Frame Nudge Bar
Same as item BA 119 (see previous page) but in a polished
stainless steel finish.
Fits Defender and Series Land Rover models.
BA 009 
Heavy-Duty Bumper/Nudge Bar
Replaces the existing bumper and uses existing fixings.
Constructed from flame cut profiles with wraparounds
mounted to a 14 gauge steel box bumper with a lower
protector bar. 1
1/2 (37mm) diameter tube. Box section 21/2
x 4 (63 x 100mm). Shot blasted, etched and then nylon
coated for superior finish.
Fits Defender and Series Land Rover models.
BA 3093B 
Winch Bumper for Defender
Winch frame and integral bumper. directly replaces the
existing bumper and allows fitting of the following winches:
Warn 6000 or 8000 “M” and “Mx” series as well as the XD
9000 and the Superwinch X6 and X9. (See page 28)
Available black nylon coated or galvanized finish (please
specify). No drilling or any modifications required.
Incorporates jacking points.
The 
BA 3093B can be further enhanced by the addition of
the optional add-on bars shown below.
BA 3093C 
‘A’ Frame for Winch Bumper
A-frame bolts on to BA 3093B shown above. The A-frame is
supplied in black nylon coating only.
Range Rover * Discovery * Defender * Freelander
www.DAP-INC.comManufacturer part numbers are used for reference only6
Bars have not been tested with SRS systems, 
and may affect SRS operation.
! 
						

							BA 3093D 
Bull Bar for Winch Bumper
Bull bar bolts on to BA 3093B shown on previous page. The
bull bar is supplied in black nylon coating only.
BA 175 
Winch Bumper for Discovery I
Made of steel folded plate and nylon coated. No drilling or
modification required other than the removal of the front
spoiler. The integrated bumper is fully compatible with the
aluminium sump guard 
(BA 083B).
The BA 175 can take the following winches: Warn 6000 or
8000 “M” and “Mx” series as well as the XD 9000 and the
Superwinch X6 and X9. 
(winch not included – see page 28)
Fits Discovery 1994-98
The 
BA 175 can be further enhanced by the addition of the
optional add-on bars shown below.
BA 175A 
‘A’ Frame for Winch Bumper
A-frame for the integrated bumper and winch mount shown
above. Easily bolts on. Black nylon coated and with the
facility to mount spot lamps.
BA 175B 
Bull Bar for Winch Bumper
Bull bar for the integrated bumper and winch mount
shown above. Easily bolts on. Black nylon coated and with
the facility to mount spot lamps.
Accessories from                  Enterprises llc.
Toll free order line  800-955-2818 7
Bars have not been tested with SRS systems, 
and may affect SRS operation.
! 
						

							BFA 1001A
Freelander 
‘A’ Frame Nudge Bar
Constructed from 2 inch tube, with spot light mounting
facility. Black nylon coated. Features:– Integral sump/spoiler
guard. Bolts directly on to front cross member and floor pan.
BFA 1002A
Stainless 
‘A’ Frame for Freelander
Constructed from 2 inch diameter stainless tube, polished to
a mirror finish. Bolts to side rails and top panel.
BFA 1003A
Wrap-around Bull Bar for Freelander
Central part made from 2 inch tube, with spot light mounting
facility. Black nylon coated. Bolts directly on to front cross
member and floor pan.
BFA 1005A
Stainless Bull Bar
Same as above but constructed from stainless steel and
polished to a mirror finish.
BFA 1006SA
HEAVY DUTY ‘A’ FRAME
Heavy Duty ‘A’ Frame with 6 point fixing in highly polished
Stainless Steel. Allows mounting of Heavy duty Sump Guard
or Splash Guard. Also has provision for Winch Mounting
Plate.
BFA 1006A– As above but black nylon coated
Range Rover * Discovery * Defender * Freelander
www.DAP-INC.comManufacturer part numbers are used for reference only8
Bars have not been tested with SRS systems, 
and may affect SRS operation.
!
BFA 1001A
BFA 1003A
BFA 1005A
BFA 1006SA
BFA 1002A