Lenovo Ideapad 110 15acl User Guide

							Chapter 1. Getting to know your computer
5
Lenovo ideapad 110-15IBR/Lenovo ideapad 110-15ACL
The following describes the features of each function key.
Fn + PrtSc (Lenovo 
ideapad 110-14IBR):Activates the insert function.
Fn + B:Activates the break function.
Fn + P:Activates the pause function.
Fn + C:Enables/disables the scroll lock.
Fn + S:Activates the system request.
Fn + :Activates the Pgup key function.
Fn + :Activates the Pgdn key function.
Fn + :Activates the home key function.
Fn + :Activates the end key function. 
						

							6
Chapter 1. Getting to know your computer
Hotkeys
You can access certain system settings quickly by pressing the appropriate hotkeys.
Lenovo ideapad 110-14IBR
Lenovo ideapad 110-15IBR/Lenovo ideapad 110-15ACL
:Mutes/unmutes the sound.:Enables/disables Airplane mode.
:Decreases the volume level.:Enables/disables the integrated 
camera.
:Increases the volume level.:Locks the screen.
:Enables/disables the microphone.:Toggles the display between the 
computer and an external device.
:Refreshes the desktop or the 
currently active window.:Decreases the display brightness.
:Enables/disables the touchpad.:Increases the display brightness. 
						

							Chapter 1. Getting to know your computer
7
Setting hotkey mode
By default, the hotkey functions are accessible by pressing the appropriate hotkey. However, 
you can disable the hotkey mode in the BIOS setup utility.
To disable the hotkey mode:
1Shut down the computer.
2Press the Novo button and then select BIOS Setup.
3In the BIOS setup utility, open the Configuration menu, and change the setting of HotKey 
Mode from Enabled to Disabled.
4Open the Exit menu, and select Exit Saving Changes.
Note:When hotkey mode is disabled, press the Fn key and the appropriate hotkey to access the 
corresponding hotkey function. 
						

							8
Chapter 1. Getting to know your computer
Left-side view   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Lenovo ideapad 110-14IBR/Lenovo ideapad 110-15IBR
Lenovo ideapad 110-15ACL
aAC power adapter jackConnects to the AC power adapter.
bNovo buttonWhen the computer is off, press this button to start the Lenovo OneKey 
Recovery System or the BIOS setup utility, or to enter the boot menu.
Notes:•You can use the tip of an unfolded paper clip (or similar object without a sharp tip) to gently press the 
Novo button.
•For details, see “Lenovo OneKey Recovery System” on page 22.
cHDMI portConnects to devices with HDMI input such as a TV or an external display.
dRJ-45 portConnects the computer to an Ethernet network.
Note:For details, see “Connecting network cables” on page 9.
eUSB portsConnect to USB devices.
Note:For details, see “Connecting USB device” on page 10.
fCombo audio jackConnects to headsets.
Notes:•The combo audio jack does not support conventional microphones.•The recording function might not be supported if third-party headphones or headsets are connected, 
due to different industry standards.
gVentilation slotsDissipate internal heat.
Note:Make sure that the ventilation slots are not blocked or else the computer may overheat. 
						

							Chapter 1. Getting to know your computer
9
Connecting network cables
Wired connections are a reliable and safe way to connect the computer to the Internet. You can 
connect a network cable to your computer.
Software configuration
Consult your Internet Service Provider (ISP) for details on how to configure your computer. 
						

							10
Chapter 1. Getting to know your computer
Connecting USB device
Your computer comes with two USB ports compatible with USB devices.
The first time you plug a USB device into a particular USB port on your computer, Windows 
automatically installs a driver for that device. After the driver has been installed, you can 
disconnect and reconnect the device without performing any additional steps.
Before disconnecting a USB storage device, make sure your computer has finished transferring 
data to that device. Click the Safely Remove Hardware and Eject Media icon in the Windows 
notification area to remove the device before disconnecting.
Note:Typically, Windows detects a new device after it has been connected, and then installs the driver 
automatically. However, some devices may require you to install the driver before connecting. Check 
the documentation provided by the device’s manufacturer before connecting the device.
Note:If your USB device uses a power cord, connect the device to a power source before connecting it. 
Otherwise, the device may not be recognized. 
						

							Chapter 1. Getting to know your computer
11
Right-side view   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aOptical drive  
(on select models)
Reads/burns optical discs.
bKensington mini security 
slotFor attaching a Kensington MiniSaver™ Mobile (or compatible) lock.
Note:Lock is not supplied. When purchasing a lock, choose one that utilizes the Cleat™ locking 
mechanism and verify its compatibility with the slot before purchase. A lock utilizing the T-Bar™ 
locking mechanism is not compatible with the Kensington mini security slot. 
						

							12
Chapter 1. Getting to know your computer
Front view    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aSystem status indicators
bMemory card slotAccepts memory cards (not supplied).
Note:For details, see “Using memory cards (not supplied)” on page 13.
SymbolIndicatorIndicator 
statusCharge 
statusMeaning
Power
On  (solid white)---The computer is powered on.
Blinking---The computer is in sleep mode.
Off---The computer is powered off.
Battery
On  (solid white)
ChargingThe battery has more than 80% charge.
DischargingThe battery has more than 20% charge.
On  (solid amber)DischargingThe battery has between 5% and 20% 
charge.
Blinking 
slowly 
(white)Charging
The battery has between 20% and 80% 
charge. When the battery reaches 80% 
charge, the light will stop blinking. 
However, charging will continue until 
the battery is fully charged.
Blinking 
slowly 
(amber)ChargingThe battery has less than 20% charge. 
When the battery charge reaches 20%, 
the blinking color will change to white.
Blinking 
quickly 
(amber)Charging/
DischargingThe battery has less than 5% charge. 
						

							Chapter 1. Getting to know your computer
13
Using memory cards (not supplied)
Your computer supports the following types of memory cards:
 Secure Digital (SD) card
 Secure Digital High Capacity (SDHC) card
 Secure Digital eXtended Capacity (SDXC) card
 MultiMediaCard (MMC)
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a memory card
Gently pull the memory card out of the memory card slot.
Notes:•Insert only one card in the slot at a time.•This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Note:Before removing the memory card, disable it by using the Windows safely remove hardware and eject 
media utility to avoid data corruption. 
						

							14
Chapter 1. Getting to know your computer
Bottom view   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Lenovo ideapad 110-14IBR
Lenovo ideapad 110-15IBR