Lenovo L2361p Users Guide

11. Side view after all cables have been placed. 
12. Power on the monitor and the computer. 
Chapter 1. 1-7 
10. Assembled line-cover as showed below. 
 
 

13.To install the monitor driver, insert the Reference and Driver CD, click Install 
driver, and follow the on-screen instructions. 
14. To optimize your monitor image, press the Automatic Image Setup key.  
Automatic image setup requires that the  monitor is warmed up for at least 15 
minutes. This is not required for normal operation. 
Note:   If automatic image setup does not establ ish the image that you prefer, perform 
manual image setup. See “Manual image setup” on page 3-4 . 
Chapter 1. 1-8 
 

Chapter 2. Adjusting and using your monitor 
This section will give you information on adjusting and using your monitor. 
Comfort and accessibility 
Good ergonomic practice is important to get the most from your personal computer 
and to avoid discomfort. Arrange your workplace and the equipment you use to suit 
your individual needs and the kind of wo rk that you perform. In addition, use 
healthy work habits to maximize your  performance and comfort while using your 
computer. For more detailed...

•Use the monitor brightness, contrast, and image adjustment controls, if equipped, 
to optimize the image on your screen to meet your visual preferences. 
•Keep your monitor screen clean so you can focus on the screen’s contents. 
Any concentrated and sustained visual activity  can be tiring for your eyes. Be sure to 
periodically look away from your monitor  screen and focus on a far object to allow 
your eye muscles to relax. If you have qu estions on eye fatigue or visual discomfort, 
consult a...

Adjusting your monitor image 
This section describes the control features to adjust your monitor image. 
Using the direct access controls 
The direct access controls  can be used when the On Screen Display (OSD) is not 
displayed. 
Table 2-1.  Direct access controls 
Icon Control Description 
Volume -Decrease the volume of speaker and audio out 
Volume + Increase the volume of speaker and audio out 
Volume switch On/off the volume of speaker and audio out 
Input Change Switches the video input source...

  
Using the On-Screen Display (OSD) controls 
To adjust the settings, the user controls can be viewed through the OSD. 
To use the controls: 
1.Press to open the main OSD menu. 
2.Use or to move among the icons. Select an icon and press to access that 
function. If there is a sub-menu,  you can move between options using 
or , 
then press  
 to select that function. Use or to make adjustments. Press to 
save. 
 to move backwards through the sub-menus and exit from the OSD. 3.Press 
4.Press and hold...

Table 2-2. OSD functions 
OSD Icon on Main 
Menu  Submenu  Description  Controls and 
Adjustments  (Analog)  Controls and 
Adjustments  (Digital)
 Brightness/  Brightness  Adjusts overall screen
 brightness 
Same as Analog
Contrast 
 Contrast 
Adjusts difference between 
light and dark areas 
Image Position   Horizontal Position  Moves screen image left or
 right.  
Controls Locked ­
not required  for  digital input 
Vertical Position 
Moves screen image up or 
down. 
Image Setup  Automatic  Optimizes...

2-6 L2361p Wide Flat Panel Monitor User’s Guide 
Table 2-2. OSD functions 
OSD Icon on Main 
Menu Submenu Description 
Controls and 
Adjustments 
(Analog) 
Controls and 
Adjustments 
(Digital) 
Scaling 
• Original AR:same aspect ratio with input 
signal 
•  Full Screen :expand image to full screen
•  Selects type of scaled imageSame as Analog 
NOVO VISION 
Screen prioritization
 Options Information 
Shows resolution, refresh rate, and product details. 
Note: This screen does not allow any changes to...

Selecting a supported display mode 
The display mode the monitor uses is controlled by the computer. Therefore, refer to 
your computer documentation for details on how to change display modes. 
The image size, position and shape might change when the display mode changes. 
This is normal and the image can be readjusted using automatic image setup and the 
image controls. 
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or 
Flat Panel technology is inherently...

Understanding power management 
Power management is invoked when the computer recognizes that you have not used 
your mouse or keyboard for a user-definable period. There are several states as 
described in the table below. 
For optimal performance, switch off your monitor at the end of each working day, or 
whenever you expect to leave it unused for long periods during the day. 
Table 2-4.  Power indicator 
State  Power Indicator  Screen  Restoring 
Operation 
Compliance 
On 
Steady white 
Normal...