Lenovo L2361p Users Guide

							
1 
Caring for your monitor 
Be sure to turn off the power before you perform any maintenance on the monitor. 
Do not: 
•Apply water or liquid directly to your monitor. 
•Use solvents or abrasives. 
•Use flammable cleaning materials to clean your monitor or any other electrical 
equipment. 
•Touch the screen area of your monitor with  sharp or abrasive items. This type of 
contact may cause permanent damage to your screen. 
•Use any cleaner which contains an anti-s tatic solution or similar additives. This 
may harm the coating of the screen area. 
Do: 
•Lightly dampen a soft cloth with water an d use this to gently wipe the covers and 
the screen. 
•Remove grease or finger marks with a  damp cloth and a little mild detergent. 
Wall Mounting(Optional) 
Refer to the instructions that come with the base mounting kit. To convert your LCD display 
from a desk-mounted to a wall-mounted display, do the following: 
Step 1: Verify that the Power button is turned Off, then disconnect the power cord. 
Step 2: Lay the LCD display face down on a towel or blanket. 
Step 3: Revolve the stand and insure it is parallel to top of the back side. Remove the 
plastic Covers from the back of the LCD display. 
Step 4: Attatch the mounting bracket from the VESA compatible wall mounting kit 
(100mm x100mm distance). 

S

tep 5: Attach the LCD display to the wall, following the instructions in the wall-mounting kit. 
Chapter 2. 2-9 
 
						

							
-
-
-
Chapter 3. Reference information 
This section contains monitor specifications,  instructions to manually install the 
monitor driver, troubleshooting information, and service information. 
Monitor specifications 
Table 3-1. Monitor specifications for type-model 
X
Y
\
W™  
Dimensions Height 
Depth 
Width 
442.0 mm (16.61 in.) 
118.0 mm (4.65 in.) 
569.0 mm (22.40 in.) 
Stand Tilt Range: 10°, 60° 
VESA mount Supported
Image Viewable image size 
Maximum height 
Maximum width 
Pixel pitch 
584.2 mm(23 in.) 
533.2 mm(20.99 in.) 
312.0 mm (12.28 in.) 
0.265 mm (0.01 in.) (V) 
Power input Supply voltage 
Max supply current 
90-264VAC (100~240VAC+/-10%)   
1.5 A 
Power consumption 
Note: Power consumption 
figures are for the monitor 
and the power supply 
combined. 
Normal operation
 Standby/Suspend 
Off 
Note:without 
Audio in/USB/Webca 
m
 < 45 W 

						

							
-
Table 3-1. Monitor specifications for type-model 
X
Y
\
W™ 
Video input (Digital)  Interface 
Input Signal 
Horizontal 
addressability 
Vertical addressability 
Clock frequency  HDMI 
VESA TMDS (Panel Link™) 
1920 pixels (max) 
1080 lines (max) 
165 MHz 
Communications 
VESA DDC  CI 
Supported Display Modes 
(VESA Standard modes 
between noted ranges) 
Horizontal frequency 
Vertical frequency 
30 kHz - 83 kHz 
50 Hz - 75 Hz 
Native Resolution  1920 x 1080 at 60 Hz 
Temperature 
Operating 
Storage 
Shipping
 0° to 40 ° C (32 ° to 104 ° F) 
-20 ° to 60 ° C (-4 ° to 140 ° F) 
-20 ° to 60 ° C (-4 ° to 140 ° F) 
Humidity  Operating 
Storage 
Shipping 
8% to 80% non-condensing 
5% to 95% non-condensing 
5% to 95% non-condensing 
3-2 L2361p Wide Flat Panel Monitor User’s Guide 
 
						

							
Troubleshooting 
If you have a problem setting up or using your monitor, you might be able to solve it 
yourself. Before calling your dealer or Lenovo, try the suggested actions that are 
appropriate to your problem. 
Table 3-2. Troubleshooting 
Problem  Possible cause  Suggested action  Reference 
The words "Out 
of Range" are 
shown on the 
screen, and the 
power indicator 
is flashing white. 
The system is set to a 
display mode which 
is not supported by 
the monitor.  If you are replacing an 
old monitor, reconnect it 
and adjust the display 
mode to within the 
specified range for your 
new monitor. 
If using a Windows 
system, restart the system 
in safe mode, then select a 
supported display mode 
for your computer. 
If these options do not 
work, contact the Support 
Center. 
“Selecting a 
supported display 
mode” on page 2-7 
The image 
quality is 
unacceptable. 
The video signal cable 
is not connected with 
the monitor or system 
completely.  Be sure the signal cable is 
firmly plugged into the 
system and monitor.  “Connecting and 
turning on your 
monitor” on page 1-4 
The color settings 
may be incorrect.  Select another color 
setting from the OSD 
menu.  “Adjusting your 
monitor image” on 
page 2-3 
The automatic image 
setup function was 
not performed.  Perform automatic image 
setup.  “Adjusting your 
monitor image” on 
page 2-3 
The power 
indicator is not 
lit and there is 
no image. 
•  The monitor’s power switch is 
not switched on. 
•  The power cord is  loose or 
disconnected. 
•  There is no power  at the outlet. 
•  Be sure the power cord is connected 
properly. 
•  Be sure the outlet has  power. 
•  Power on the  monitor. 
• Try using another  power cord. 
• Try using another  electrical outlet. 
“Connecting and 
turning on your 
monitor” on page 1-4 
Screen is blank 
and power 
indicator is 
orange
The monitor is in 
Standby/Suspend 
mode  •  Press any key on the keyboard or move 
the mouse to restore 
operation. 
• Check the Power  Options settings on 
your computer. 
“Understanding 
power management” 
on page 2-8 
Chapter 3. 3-3 
 
						

							
Table 3-2. Troubleshooting 
Problem  Possible cause  Suggested action  Reference 
The power 
indicator is 
orange, but there   
is no image. 
The video signal cable 
is loose or 
disconnected from the 
system or monitor.  Be sure the video cable is 
connected with the 
system properly.  “Connecting and 
turning on your 
monitor” on page 1-4 
The monitor 
brightness and 
contrast are at the 
lowest setting.  Adjust the brightness and 
contrast setting on the 
OSD menu.  “Adjusting your 
monitor image” on 
page 2-3 
One or more of 
the pixels appear 
discolored 
This is a characteristic 
of the LCD 
technology and is not 
an LCD defect.  If there are more than five 
pixels missing, contact 
the Support Center.  Appendix A, 
“Service and 
Support,” on page 
A-1 
•  Fuzzy lines in text or a 
blurry 
image. 
•  Horizontal  or vertical 
•  Image setup has not been 
optimized 
•  Your system  Display 
Properties setting 
Adjust the resolution 
settings on your system 
to match the native 
resolution for this 
monitor: 1920 x 1080 at 60 
Hz. 
“Adjusting your 
monitor image” on 
page 2-3 
“Manual image 
setup” 
lines 
through the 
image. 
have not been 
optimized. 
Perform automatic image 
setup.  If automatic image 
setup does not help, 
perform manual image 
setup. 
“Selecting a 
supported display 
mode” on page 2-7 
When working in the 
native resolution, you 
may find additional 
improvements by 
adjusting the Dots Per 
Inch (DPI) setting on your 
system. 
See the Advanced 
section of your 
system’s display 
properties. 
Manual image setup 
If automatic image setup does not establish the image that you prefer, perform 
manual image setup. 
Note:  Have your monitor powered on for about 15 minutes, until the monitor warms 
up. 
  at the bottom of the monitor to open the OSD menu. 1.Press 
2.Use or  to select  and press to access. 
or   to select  Clock and Phase  a djustment. 3.Use 
•Clock (pixel frequency) adjusts the number of pixels scanned by one 
horizontal sweep. If the frequency is not  correct, the screen shows vertical 
stripes and the picture does  not have the correct width. 
•Phase adjusts the phase of the pixel  clock signal. With a wrong phase 
adjustment, the picture has horizont al disturbances in light picture. 
4.When the image no longer looks distorte d, save the Clock and Phase adjustments. 
 to leave the OSD menu. 5.Press 
3-4 L2361p Wide Flat Panel Monitor User’s Guide 
 
						

							
Manually installing the monitor driver 
Installing the monitor driver in Windows 7
To use the Plug and Play feature Microsoft Windows 7, do the following: 
Note: You must download file from the Lenovo  Monitor CD to use the Plug and Play 
feature in Windows 7. 
1.Turn off the computer and all attached devices. 
2.Ensure that the monitor is connected correctly. 
3.Turn on the monitor and then the system unit. Allow your computer to start the 
Windows 7 operating system. 
4.Open the  Display Properties  window by clicking  Start, Control Panel and  then 
double-clicking the  Hardware and Sound  icon. 
5.Click the Personalization  icon. 
6.Click the Display Settings  icon. 
7.Click the Advanced Settings  button. 
8.Click the Monitor tab. 
9.Click the  Properties  button. 
10. Click the Driver tab. 
11. Open the " Update Driver Software-Generic PnP Monitor " window by clicking 
on  Update Driver  and then click the " Browse my computer for driver software " 
button. 
12. Select " Let me pick from a list of device drivers on my computer". 
13. Click the  Have Disk  button. Click on the  Browse button and navigate to the 
following directory: 
X:\Monitor Drivers\Windows 7 
(where X is the drive letter designator for the CD-ROM drive). 
14. Select the  "LEN L2361pwA.inf"  file and click the Open button. Click the  OK button. 
15. Select LEN L2361pwA  and click Next. The files will be copied from the CD to 
your hard disk drive. 
16. Close all open windows and remove the CD. 
17. Restart the system. The sy stem will automatically select the maximum refresh 
rate and corresponding Color Matching Profiles. 
Note:  On LCD monitors, unlike CRTs, a faster  refresh rate does not improve display 
quality. Lenovo recommends using either 1920  x 1080 at a refresh rate of 60 Hz, or 640 
x 480 at a refresh rate of 60 Hz. 
Chapter 3. 3-5 
Below are steps for manually installi ng the monitor driver in Microsoft® Windows ® ®XP Microsoft  Windows Vista  Microsoft  Windows 7 
. Please see the Install Driver
 section of the  Reference and 
Driver CD for automatic installation. 
 
						

							
Installing the monitor driver in Windows Vista  
To use the Plug and Play feature in Wind ows Vista, files should be loaded from the 
Reference and Driver CD . 
Note: This section must be completed befo re continuing with the Windows Vista
automatic image setup. 
1.Turn off the computer and all attached devices. 
2.Ensure that the monitor is connected correctly. 
3.Turn on the monitor and then the system unit. Allow the system to boot into 
Windows Vista. 
4.Open the  Display Properties  window by clicking  Start JSettings JControl 
Panel , and then double-clicking the  Display icon. 
5.Click the  Settings tab. 
6.Click the  Advanced  button. 
7.Click the Monitor tab. 
8.Click the  Properties  button. 
9.Click the Drivers tab. 
10. Open the  Hardware Update Wizard  window by clicking on Update Driver, and 
then click Next . 
11. Select Install from a list or Spe cific location(Advanced), and then click Next. 
12. Select "Don't search. I will choo se the driver to install" option, and then click 
Next . 
13. Click the  Have Disk  button. Click on the  Browse button and navigate to 
the following directory:  
X:\Monitor Drivers\Windows Vista 
(where X is the drive letter designator for the CD-ROM drive). 
14. Select the  "LEN L2361pwA.inf"  file and click the Open button. Click the  OK button. 
15. Select LEN L2361pwA  and click Next. The files will be copied from the CD to 
your hard disk drive. 
16. Close all open windows and remove the CD. 
17. Restart the system. The sy stem will automatically select the maximum refresh 
rate and corresponding Color Matching Profiles. 
Note:  On LCD monitors, unlike CRTs, a faster  refresh rate does not improve display 
quality. Lenovo recommends using either 1920  x 1080 at a refresh rate of 60 Hz, or 640 
x 480 at a refresh rate of 60 Hz. 
3-6 L2361p Wide Flat Panel Monitor User’s Guide 
 
						

							
Installing the monitor driver in Windows XP
To use the Plug and Play feature Microsoft Windows XP, do the following: 
Note: You must download file from the Lenovo  Monitor CD to use the Plug and Play 
feature in Windows XP. 
1.Turn off the computer and all attached devices. 
2.Ensure that the monitor is connected correctly. 
3.Turn on the monitor and then the system unit. Allow your computer to start the 
Windows XP operating system. 
4.Open the  Display Properties  window by clicking  Start, Control Panel and 
Hardware and Sound  icon. 
5.Click the Appearance and Personalization  icon. 
6.Click the Display icon. 
7.Click the change display  Settings button. 
8. Click the  Advanced Settings  button. 
9 Click the  Monitor tab. 
.
10
Click the  Properties  button..
11.Click the Driver tab. 
12. Open the " Update Driver Software-Generic PnP Monitor " window by clicking 
on  Update Driver  and then click the " Browse my computer for driver software " 
button. 
13.Select " Let me pick from a list of device drivers on my computer". 
14. Click the  Have Disk  button. Click on the  Browse button and navigate to the 
following directory: 
X:\Monitor Drivers\Windows XP 
(where X is the drive letter designator for the CD-ROM drive). 
15.Select the  "LEN L2361pwA.inf"  file and click the Open button. Click the  OK button. 
16. Select LEN L2361pwA  and click Next. The files will be copied from the CD to 
your hard disk drive. 
17.Close all open windows and remove the CD. 
18. Restart the system. The sy stem will automatically select the maximum refresh 
rate and corresponding Color Matching Profiles. 
Note:  On LCD monitors, unlike CRTs, a faster  refresh rate does not improve display 
quality. Lenovo recommends using either 1920  x 1080 at a refresh rate of 60 Hz, or 640 
x 480 at a refresh rate of 60 Hz. 
Chapter 3. 3-7 
 
						

							
3AppendixA.ServiceandSupportA-1 
Appendix A. Service and Support 
The following information describes the technical support that is available for your product, during the 
warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty for a full 
explanation of Lenovo warranty terms. 
Registering your option 
Register to receive product service and support updates, as well as free and discounted computer 
accessories and content. Go to:
http://www.lenovo.com/register 
Online technical support 
Online technical support is available during the lifetime of a product at: 
http://www.lenovo.com/support 
Product replacement assistance or exchange of defective components also is available during the 
warranty period. In addition, if your option is installed in a Lenovo computer, you might be entitled to 
service at your location. A Lenovo technical support representative can help you determine the best 
alternative. 
Telephone technical support 
Installation and configuration support through the Customer Support Center will be available until 90 
days after the option has been withdrawn from marketing. After that time, the support is cancelled, or 
made available for a fee, at Lenovo’s discretion. Additional support is also available for a nominal fee. 
Before contacting a Lenovo technical support representative, please have the following information 
available: option name and number, proof of purchase, computer manufacturer, model, serial number and 
manual, the exact wording of any error message, description of the problem, and the hardware and 
software configuration information for your system. 
Your technical support representative might want to walk you through the problem while you are at your 
computer during the call. 
Telephone numbers are subject to change without notice. The most up-to-date telephone list for Lenovo 
Support is always available at: 
http://www.lenovo.com/support/phone 
 Country or Region Telephone Number 
Africa Africa: +44 (0)1475-555-055 
South Africa: +27-11-3028888 and 0800110756 
Central Africa: Contact the nearest Lenovo 
Business Partner 
Argentina 0800-666-0011 (Spanish) 
Australia 131-426 (English) 
Austria Warranty service and support: 01-211-454-610 (German) 
Belgium Warranty service and support: 02-225-3611 (Dutch, French) 
Bolivia 0800-10-0189 (Spanish) 
 
						

							
AppendixB.Notices
Lenovomaynotoffertheproducts,services,orfeaturesdiscussedinthisdocumentinallcountries.
ConsultyourlocalLenovorepresentativeforinformationontheproductsandservicescurrentlyavailable
inyourarea.AnyreferencetoaLenovoproduct,program,orserviceisnotintendedtostateorimply
thatonlythatLenovoproduct,program,orservicemaybeused.Anyfunctionallyequivalentproduct,
program,orservicethatdoesnotinfringeanyLenovointellectualpropertyrightmaybeusedinstead.
However,itistheuser ’sresponsibilitytoevaluateandverifytheoperationofanyotherproduct,
program,orservice.
Lenovomayhavepatentsorpendingpatentapplicationscoveringsubjectmatterdescribedinthis
document.Thefurnishingofthisdocumentdoesnotgiveyouanylicensetothesepatents.Youcansend
licenseinquiries,inwriting,to:
Lenovo(UnitedStates),Inc.
1009ThinkPlace- BuildingOne
Morrisville,NC27560
U.S.A.
Attention:LenovoDirectorofLicensing
LENOVOPROVIDESTHISPUBLICATION“ASIS”WITHOUTWARRANTYOFANYKIND,EITHER
EXPRESSORIMPLIED,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOF
NON-INFRINGEMENT,MERCHANTABILITYORFITNESSFOR APARTICULARPURPOSE.Some
jurisdictionsdonotallowdisclaimerofexpressorimpliedwarrantiesincertaintransactions,therefore,
thisstatementmaynotapplytoyou.
Thisinformationcouldincludetechnicalinaccuraciesortypographicalerrors.Changesareperiodically
madetotheinformationherein;thesechangeswillbeincorporatedinneweditionsofthepublication.
Lenovomaymakeimprovementsand/orchangesintheproduct(s)and/ortheprogram(s)describedin
thispublicationatanytimewithoutnotice.
Theproductsdescribedinthisdocumentarenotintendedforuseinimplantationorotherlifesupport
applicationswheremalfunctionmayresultininjuryordeathtopersons.Theinformationcontainedin
thisdocumentdoesnotaffectorchangeLenovoproductspecificationsorwarranties.Nothinginthis
documentshalloperateasanexpressorimpliedlicenseorindemnityundertheintellectualproperty
rightsofLenovoorthirdparties.Allinformationcontainedinthisdocumentwasobtainedinspecific
environmentsandispresentedasanillustration.Theresultobtainedinotheroperatingenvironments
mayvary.
Lenovomayuseordistributeanyoftheinformationyousupplyinanywayitbelievesappropriate
withoutincurringanyobligationtoyou.
Anyreferencesinthispublicationtonon-LenovoWebsitesareprovidedforconvenienceonlyanddonot
inanymannerserveasanendorsementofthoseWebsites.ThematerialsatthoseWebsitesarenotpart
ofthematerialsforthisLenovoproduct,anduseofthoseWebsitesisatyourownrisk.
Anyperformancedatacontainedhereinwasdeterminedinacontrolledenvironment.Therefore,the
resultobtainedinotheroperatingenvironmentsmayvarysignificantly.Somemeasurementsmayhave
beenmadeondevelopment-levelsystemsandthereisnoguaranteethatthesemeasurementswillbethe
sameongenerallyavailablesystems.Furthermore,somemeasurementsmayhavebeenestimatedthrough
extrapolation.Actualresultsmayvary.Usersofthisdocumentshouldverifytheapplicabledatafortheir
specificenvironment.
© Copyright Lenovo 2010 . © B -1