Lenovo S5000f Owners Manual

							 Lenovo S5000
37
1060 Main camera
 and sub camera
For access, remove the following FRUs in order:
• “1010 SIM card holder ” on page 28
• “1020 Rear cover and side key” on page 29
1.Use a guitar pick to detach the FPC connector of the main camera from the 
main PCBA.
Figure 6-1. Detaching the FPC of the main camera
2.Remove the main camera as shown below.
Figure 6-2. Main camera removed   
						

							 Lenovo S5000 Hardware Maintenance Manual
38
3.Use a guitar pick to detach the FPC connector of the sub camera from the 
main PCBA.
Figure 6-3. Detaching the FPC of the sub camera
4.Remove the sub camera as shown below.
Figure 6-4. Sub camera removed   
						

							 Lenovo S5000
39
1070 Battery FPC connector holder
For access, remove the following FRUs in order:
• “1010 SIM card holder ” on page 28
• “1020 Rear cover and side key” on page 29
1.
Remove 2 screws   on the ba ttery FPC connector holder.
Figure 7-1. Screws fixing the battery FPC connector holder
2.Remove the battery FPC connector holder as shown below.
Figure 7-2. Connector holder removed
StepScrew (quantity)ColorTorque
M1.4 x 2.5mm, Phillips flat-head (2) Black N/A
a
a   
						

							 Lenovo S5000 Hardware Maintenance Manual
401080 Antenna assembly
For access, remove the following FRUs in order:
• “1010 SIM card holder ” on page 28
• “1020 Rear cover and side key” on page 29
• “1030 SIM sub board” on page 31
• “1050 Rear frame” on page 35
1.
Remove 2 screws   on the antenna assembly as shown below.
Figure 8-1. Screws on  the antenna assembly 
2.Remove the antenna assembly.
Figure 8-2. Antenna assembly removed
StepScrew (quantity)ColorTorque
M1.4 x 2.5mm, Phillips flat-head (2) Black N/A
a
a   
						

							 Lenovo S5000
41
1090 RF cables
For access, remove the following FRUs in order:
• “1010 SIM card holder ” on page 28
• “1020 Rear cover and side key” on page 29
• “1030 SIM sub board” on page 31
• “1050 Rear frame” on page 35
• “1080 Antenna assembly” on page 40
1.
Use a guitar pick to disconnect the RF cables from its connectors on both the 
main PCBA and USB sub board.
Figure 9-1. Disconnecting the RF cable   
						

							 Lenovo S5000 Hardware Maintenance Manual
42
2.Remove the RF cables as shown below.
Figure 9-2. RF cables removed   
						

							 Lenovo S5000
43
1100 USB sub board assembly
For access, remove the following FRUs in order:
• “1010 SIM card holder ” on page 28
• “1020 Rear cover and side key” on page 29
• “1030 SIM sub board” on page 31
• “1050 Rear frame” on page 35
• “1080 Antenna assembly” on page 40
• “1090 RF cables” on page 41
1.
Detach the vibrator motor from it s seat using a thin flat blade.
Figure 10-1. Detaching the vibrator motor 
Important notices for handling PCB:
When handling PCB, bear the following in mind:
• Be careful not to drop the PCB onto a bench top that has a hard surface, 
such as surface made of metal, wood, or composite materials.
• Avoid rough handling of any kind.
• Make sure not to drop or stac k the PCB in the whole process.
• Make sure to put the PCB only on surface covered with such materials as  an ESD mat or conductive corrugated plate.   
						

							 Lenovo S5000 Hardware Maintenance Manual
44
2.Disconnect the main FPC from the US B sub board assembly using a guitar 
pick.
Figure 10-2. Detaching the main FPC
3. Remove the USB sub board assembly using a guitar pick.
Figure 10-3. Removing the USB sub board assembly    
						

							 Lenovo S5000
45
1110 Main PCBA
For access, remove the following FRUs in order:
• “1010 SIM card holder ” on page 28
• “1020 Rear cover and side key” on page 29
• “1030 SIM sub board” on page 31
• “1040 Speaker box” on page 33
• “1050 Rear frame” on page 35
• “1060 Main camera and sub camera” on page 37
• “1070 Battery FPC connector holder ” on page 39
• “1080 Antenna assembly” on page 40
• “1090 RF cables” on page 41
1.
Remove 2 screws   fixing the main PCBA to the main body.
Figure 11-1. Screws on the main PCBA
Important notices for handling PCB:
When handling PCB, bear the following in mind:
• Be careful not to drop the PCB onto a bench top that has a hard surface, 
such as surface made of metal, wood, or composite materials.
• Avoid rough handling of any kind.
• Make sure not to drop or stac k the PCB in the whole process.
• Make sure to put the PCB only on surface covered with such materials as  an ESD mat or conductive corrugated plate.
a   
						

							 Lenovo S5000 Hardware Maintenance Manual
46
2.Detach the connection of the battery FPC on the main PCBA using a guitar 
pick.
Figure 11-2. Detaching the battery FPC
3.Detach the connection of the LCD FPC on the main PCBA using a guitar pick.
Figure 11-3. Detaching the LCD FPC