Lenovo Thinkvision L191 Users Guide

Product numbers
6135-AB2
6135-AG2
6235-AB2
6235-AG2
First Edition (April 2006)
© Copyright Lenovo 2006.
All rights reserved.
U.S. GOVERNMENT USERS - RESTRICTED RIGHTS: Our products and/or services are provided with RESTRICTED
RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule contract with Lenovo
Group Limited, if any, or the standard terms of this commercial license, or if the agency is unable to accept this Program
under these terms, then we provide this...

Contents
Safety information........................................................................\
............................. iii
 
Chapter 1. Getting started ........................................................................\
................. 1-1
Shipping contents ........................................................................\
...................................... ............................................ 1-1
Attaching the base and handling your monitor...

Safety information
© Copyright Lenovo 2006.iii
 

Chapter 1. Getting started
This User’s Guide contains detailed information on the Lenovo L191 Flat Panel
Monitor. For a quick overview, please see the Setup Poster that was shipped with
your monitor.
Shipping contents
The product package should include the following items:·    Setup Poster
· Monitor Safety, Troubleshooting, and Warranty Guide
· Reference and Driver CD
·    Flat Panel Monitor
· Power Cord
· Analog Interface Cable- Attached to monitor
Attaching the base and handling your monitor
To set up...

Product overview
This section will provide information on carrying your monitor, adjusting monitor
positions, setting user controls, and using the cable lock slot.
Carrying your monitor
Your monitor is equipped with an integrated handle for easy carrying.
Types of adjustments
Please see the illustration below for an example of the tilt range.
User controls
Your monitor has controls on the front which are used to adjust the displ\
ay.
For information on how to use these controls, please see
“Adjusting...

Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of yo\
ur monitor (in
the lower right corner). Please see the instructions that came with the\
 cable lock to
learn how to attach it.
Setting up your monitor
This section provides information to help you set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety Information located in the  Monitor Safety,
Troubleshooting, and Warranty Guide  before carrying out this procedure.
1. Power...

2. Connect the analog signal cable to the video port on the back of the com\
puter.
Note: One end of the signal cable is already pre-attached to your monitor.
3. Insert the power cord into the monitor, then plug the monitor power cord and the
computer cord into grounded electrical outlets.
4. Power on the monitor and the computer.
1-4L191 Flat Panel Monitor User’s Guide
 

5. To install the monitor driver, insert the Reference and Driver CD, click Install
driver , and follow the on-screen instructions.
6. To optimize your monitor image, press the Automatic Image Setup key. Automatic
image setup requires that the monitor is warmed up for at least 15 minut\
es. This
is not required for normal operation.
Note: If automatic image setup does not establish the image that you prefer, perform
manual image setup. See “Manual image setup” on page 3-3.
Registering your option
Thank...

Chapter 2. Adjusting and using your monitor
This section will give you information on adjusting and using your monit\
or.
Comfort and accessibility
Good ergonomic practice is important to get the most from your personal \
computer
and to avoid discomfort. Arrange your workplace and the equipment you use to suit
your individual needs and the kind of work that you perform. In addition\
, use healthy
work habits to maximize your performance and comfort while using your co\
mputer.
For more detailed...