Lenovo Thinkvision L2321x Users Guide

 
 
 
9.    Power on the monitor and the computer. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
10. To install the monitor driver, insert the Reference and Driver CD, click Install 
driver, and follow the on-screen instructions. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
11. To optimize your monitor image, if using the analog cable, press the Automatic 
Image Setup key. Automatic image setup requires that the monitor is warmed up for 
at least 15 minutes. This is not required if you are using the DP cable....

 
 
  
Registering your option 
Thank you for purchasing this Lenovo product. Please take a few moments to 
register your product and provide us with information that will help Lenovo to 
better serve you in the future. Your feedback is valuable to us in developing 
products and services that are important to you, as well as in developing better 
ways to communicate with you. Register your option on the following Web site: 
http://www.lenovo.com/register
Lenovo will send you information and updates on...

 
 
 
Chapter 2. Adjusting and using your monitor 
This section will give you information on adjusting and using your monitor. 
 
Comfort and accessibility 
Good ergonomic practice is important to get the most from your personal 
computer and to avoid discomfort. Arrange your workplace and the equipment 
you use to suit your individual needs and the kind of work that you perform. In 
addition, use healthy work habits to maximize your performance and comfort 
while using your computer. 
 
For more...

 
 
●   Use adequate lighting for the type of work you are performing. 
●   Use the monitor brightness, contrast, and image adjustment controls, if 
equipped, to optimize the image on your screen to meet your visual preferences. 
●   Keep your monitor screen clean so you can focus on the screen’s contents. 
 
Any concentrated and sustained visual activity can be tiring for your eyes. Be sure 
to periodically look away from your monitor screen and focus on a far object to 
allow your eye muscles to relax....

 
 
  
Adjusting your monitor image 
This section describes the user control features used to adjust your monitor image.
Using the direct access controls 
The direct access controls can be used when the On Screen Display (OSD) is not   
displayed. 
 
Note: The direct access controls are colored. 
Table 2-1. Direct access controls 
Icon Control Description 
 Image Select Menu Switches the Signal or dual screen mode 
 Image Setup Activates automatic image adjustment. 
 Brightness   Direct access to...

 
 
 
Using the ThinkVision Duo (TVD) software control 
In order to use the dual-screen function of the L2321x monitor, your PC system must 
have both VGA and DisplayPort video outputs which must be connected to the monitor 
as detailed on page 1-4. Lenovo recommends the use of the ThinkVision Duo software   
to optimize the dual screen operation as it simplifies the configuration and display of   
both video outputs from your PC. 
If the VGA and DisplayPort outputs from a Lenovo ThinkPad are used in...

 
Use current settings for next launch   
 
Check Save setting to use the current settings the next time the software is launched. 
Auto run with system startup   
 
Check auto-run to enable the auto run of Thin kVision Duo when the operating system starts. 
Language setup 
 
Click Language to select a desired language, and  then the display language of ThinkVision Duo   
will change accordingly. 
 
3.Choose display mode 
Choose Full Screen mode 
 
Select VGA or DP to display it in a full screen....

 
 
4.Cautions 
1. This software is solely applicable to Lenovo  ThinkVision L2321x display and not applicable 
  to other displays. 
2. On the full screen display with an extended di splay, the task bar and tool bar will not be   
available. To switch to other mode, the user need s to press the button of the display for manual   
switch. 
3. Screen flashing during the mode switch is norm al. It may last 3-5 seconds, during which the   
screen will automatically optimize the display. 
4. During the...

 
 
 
Table 2-2. OSD functions 
OSD Icon on Main Menu Submenu Controls and Adjustments  (Analog) 
Controls and Adjustments (Digital) 
 Brightness Adjusts overall brightness 
  
 
 
 
Brightness/ 
Contrast 
 
 
 Contrast Adjusts difference between  
light and dark areas   
Same as Analog 
 Horizontal Position   Moves the image left or 
right.   
  
Image Position 
 Vertical Position Moves the image up or   
down   
 Automatic Automatically optimizes the image.     
Image Setup 
 Manual 
Manually optimizes...

 
 
 
 
Table 2-2. OSD functions 
OSD Icon on Main Menu Submenu Description 
  Scaling 
 
●  Original AR 
    Same Aspect Ratio with input signal  
●  Full  
Expand image to full screen 
 Information 
Shows resolution, refresh rate, and product details. 
Note: This screen does not allow any changes to the settings. 
 Menu Language 
This section lists the languages supported by your monitor.   
 
Note: The language chosen only affects the language of the OSD. It has no 
effect on any software running on...